I’m running version 12 of FreePBX and voicemail seems to have lost itself. *97 and *98 act the same, both give the comedian mail username and password. Even with the right username and password it gives incorrect password. The password is not the same as the mailbox number. If you try to call direct to a user’s voicemail it says “sorry” and then hangs up. any ideas? all modules are up to date
asterisk -rvvvvvvv
voicemail reload
What is the output
I’m assuming this would be put into the Asterisk CLI? Should I put in -rvvvvvv voicemail reload or just voicemail reload. Probably a very stupid question. Thanks
Run
asterisk -rvvvvvvv
Now run
voicemail reloadIt says, No such command ‘asterisk -rvvvvvvv’
I
You’re killin’ me smalls!!!
SSH Into your machine and as ROOT run this command outside of Asterisk
asterisk -rvvvvvvv
Now you are IN Asterisk so run
voicemail reload
1 Like
I’ve embarrassed myself. Your patience is greatly appreciated.
1 Like
Hi guys, I work with Mark. I know what you want, and where to do it. Quick Question. Will that affect normal operations of the system when I run those commands? I will try to do that first thing tomorrow morning.
Thanks
Here’s what I got:
nimbus*CLI> voicemail reload
Reloading voicemail configuration…
== Parsing ‘/etc/asterisk/voicemail.conf’: Found
== Parsing ‘/etc/asterisk/vm_general.inc’: Found
== Parsing ‘/etc/asterisk/vm_email.inc’: Found
– Remove dpma_message_context/proxy/1, registrar=digium_phone_module; con=dpma_message_context(0xb54ec578); con->root=0xb58d58d8
– Added extension ‘proxy’ priority 1 to dpma_message_context
Looks like your voicemail is fine to me. Try uploading some logs here
I tried to call into voicemail today using the correct username and password, here are the logs
[2015-10-05 13:19:26] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:1] Answer(“SIP/2199-00004851”, “”) in new stack
[2015-10-05 13:19:26] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:2] Wait(“SIP/2199-00004851”, “1”) in new stack
[2015-10-05 13:19:26] NOTICE[2166] chan_sip.c: Received SIP subscribe for peer without mailbox: 2125
[2015-10-05 13:19:26] NOTICE[2166] chan_sip.c: Received SIP subscribe for peer without mailbox: 2111
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:3] Macro(“SIP/2199-00004851”, “user-callerid,”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/2199-00004851”, “TOUCH_MONITOR=1444065566.42731”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/2199-00004851”, “AMPUSER=2199”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/2199-00004851”, “0?report”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/2199-00004851”, “1?Set(REALCALLERIDNUM=2199)”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/2199-00004851”, “AMPUSER=2199”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/2199-00004851”, “0?limit”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/2199-00004851”, “AMPUSERCIDNAME=CQ Test”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/2199-00004851”, “0?report”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/2199-00004851”, “AMPUSERCID=2199”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/2199-00004851”, “__DIAL_OPTIONS=Ttr”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/2199-00004851”, “CALLERID(all)=“CQ Test” <2199>”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/2199-00004851”, “0?limit”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/2199-00004851”, “0?Set(GROUP(concurrency_limit)=2199)”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:14] GosubIf(“SIP/2199-00004851”, “7?sub-ccss,s,1(from-internal,*97)”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/2199-00004851”, “0?Return()”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/2199-00004851”, “CCSS_SETUP=TRUE”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/2199-00004851”, “0?monitor_config,1(from-internal,*97):monitor_default,1(from-internal,*97)”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/2199-00004851”, “0?is_exten”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/2199-00004851”, “”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/2199-00004851”, “FALSE”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:15] ExecIf(“SIP/2199-00004851”, “0?Set(CHANNEL(language)=)”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/2199-00004851”, “0?continue”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/2199-00004851”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/2199-00004851”, “__TTL=64”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/2199-00004851”, “1?continue”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Goto (macro-user-callerid,s,30)
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/2199-00004851”, “CALLERID(number)=2199”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/2199-00004851”, “CALLERID(name)=CQ Test”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/2199-00004851”, “CDR(cnum)=2199”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/2199-00004851”, “CDR(cnam)=CQ Test”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/2199-00004851”, “CHANNEL(language)=en”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:4] Macro(“SIP/2199-00004851”, “get-vmcontext,2199”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-get-vmcontext:1] Set(“SIP/2199-00004851”, “VMCONTEXT=default”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-get-vmcontext:2] GotoIf(“SIP/2199-00004851”, “0?200:300”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Goto (macro-get-vmcontext,s,300)
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [s@macro-get-vmcontext:300] NoOp(“SIP/2199-00004851”, “”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:5] Set(“SIP/2199-00004851”, “VMBOXEXISTSSTATUS=FAILED”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:6] GotoIf(“SIP/2199-00004851”, “0?mbexist”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] pbx.c: – Executing [*97@from-internal:7] VoiceMailMain(“SIP/2199-00004851”, “”) in new stack
[2015-10-05 13:19:27] VERBOSE[18529][C-00003c26] file.c: – <SIP/2199-00004851> Playing ‘vm-login.ulaw’ (language ‘en’)
Does the VM Box exist on the hard drive?
I would have to check with Ed on that but I would assume so. This was a standard FreePBX Distro. I did make the call above from a cell phone with zoiper if that explains any of the oddities you see.
Is this problem happening with one extension, or all extensions?
If one extension, SSH into your PBX and from the CLI type cd /var/spool/asterisk/voicemail/default
Once you’re in that directory, type in ls and press enter. Is there a directory here for the extension you are having problems with?
If so, great, we just want to establish there is an active voicemail directory for the extension you are having problems with.
You may want to test the DTMF settings on an extension as well, as this can cause the PBX to not recognize key inputs correctly. From the FreePBX GUI goto Applications > Extensions and select any extension. Scroll down to DTMF Signaling. It will probably be set to RFC2833, set it to inband. If it is already set to inband, set it to RFC2833. Save and apply your changes. From the extension you just modified, dial *97 and test your voicemail.
Let us know how that works out.
I checked the directory and there are 8 folders for voicemailboxes. There are 74 mailboxes created and they show up in Voicemail Admin as (default) (unactivated). I created a new extension 2299 and created a voicemailbox for it. When I call *97 I get the login prompt, I enter the VMB and it asked for the password, and I get a login Incorrect. Here is some of the log. It shows that the system gets a status of Failed when it looks for the mailbox.
[2015-10-06 11:31:32] VERBOSE[2166][C-000044a5] netsock2.c: == Using SIP RTP CoS mark 5
[2015-10-06 11:31:32] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:1] Answer(“SIP/2299-00005418”, “”) in new stack
[2015-10-06 11:31:32] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:2] Wait(“SIP/2299-00005418”, “1”) in new stack
[2015-10-06 11:31:33] NOTICE[2166] chan_sip.c: Received SIP subscribe for peer without mailbox: 2126
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:3] Macro(“SIP/2299-00005418”, “user-callerid,”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/2299-00005418”, “TOUCH_MONITOR=1444145492.49235”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/2299-00005418”, “AMPUSER=2299”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/2299-00005418”, “0?report”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/2299-00005418”, “1?Set(REALCALLERIDNUM=2299)”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/2299-00005418”, “AMPUSER=2299”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/2299-00005418”, “0?limit”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/2299-00005418”, “AMPUSERCIDNAME=CQTest”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/2299-00005418”, “0?report”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/2299-00005418”, “AMPUSERCID=2299”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/2299-00005418”, “__DIAL_OPTIONS=Ttr”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/2299-00005418”, “CALLERID(all)=“CQTest” <2299>”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/2299-00005418”, “0?limit”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/2299-00005418”, “0?Set(GROUP(concurrency_limit)=2299)”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:14] GosubIf(“SIP/2299-00005418”, “7?sub-ccss,s,1(from-internal,*97)”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/2299-00005418”, “0?Return()”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/2299-00005418”, “CCSS_SETUP=TRUE”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/2299-00005418”, “0?monitor_config,1(from-internal,*97):monitor_default,1(from-internal,*97)”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/2299-00005418”, “0?is_exten”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/2299-00005418”, “”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/2299-00005418”, “FALSE”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:15] ExecIf(“SIP/2299-00005418”, “0?Set(CHANNEL(language)=)”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/2299-00005418”, “0?continue”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/2299-00005418”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/2299-00005418”, “__TTL=64”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/2299-00005418”, “1?continue”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Goto (macro-user-callerid,s,30)
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/2299-00005418”, “CALLERID(number)=2299”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/2299-00005418”, “CALLERID(name)=CQTest”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/2299-00005418”, “CDR(cnum)=2299”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/2299-00005418”, “CDR(cnam)=CQTest”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/2299-00005418”, “CHANNEL(language)=en”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:4] Macro(“SIP/2299-00005418”, “get-vmcontext,2299”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-get-vmcontext:1] Set(“SIP/2299-00005418”, “VMCONTEXT=default”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-get-vmcontext:2] GotoIf(“SIP/2299-00005418”, “0?200:300”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Goto (macro-get-vmcontext,s,300)
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [s@macro-get-vmcontext:300] NoOp(“SIP/2299-00005418”, “”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:5] Set(“SIP/2299-00005418”, “VMBOXEXISTSSTATUS=FAILED”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:6] GotoIf(“SIP/2299-00005418”, “0?mbexist”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] pbx.c: – Executing [*97@from-internal:7] VoiceMailMain(“SIP/2299-00005418”, “”) in new stack
[2015-10-06 11:31:33] VERBOSE[754][C-000044a5] file.c: – <SIP/2299-00005418> Playing ‘vm-login.ulaw’ (language ‘en’)
[2015-10-06 11:31:34] NOTICE[2166] chan_sip.c: Received SIP subscribe for peer without mailbox: 2126
[2015-10-06 11:31:36] WARNING[754][C-000044a5] app_voicemail.c: Couldn’t read username
[2015-10-06 11:31:36] VERBOSE[754][C-000044a5] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/2299-00005418”, “”) in new stack
[2015-10-06 11:31:36] VERBOSE[754][C-000044a5] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/2299-00005418’
I think it is an issue with the GUI creating the initial directories for the mailboxes themselves.
For what it is worth ALL but the extension I created were created by using bulk extension upload.
It now appears that we have a second system that has been installed by the same Tech that is experiencing the same issue.
You are using version 12. There are thousands of installs. None of them (except you) experience this issue. Hard to really say it’s the GUI
I didn’t mean to besmirch the GUI Andrew, it does a fantastic job. I just don’t know any other way to add the directory entries without the GUI, I am assuming that is how they get created. Murphy has taken a liking to me lately and I wish he would quit it! The new mailbox is not in the directory. Any ideas?
Hi, can you send the config of your voicemail.conf? In some strange situations I have seen that the voicemail get edit somehow and places some extensions on a different context.
Here is the voicemail.conf:
[general]
externnotify=/var/lib/asterisk/agi-bin/vmnotify-newvm.php
#include vm_general.inc
#include vm_email.inc
adsiver=admin
attach=yes
authpassword=CQSimple!
envelope=yes
forcegreetings=no
forcename=yes
moveheard=no
nextaftercmd=no
operator=yes
pbxskip=no
review=no
saycid=no
sayduration=yes
searchcontexts=no
sendvoicemail=yes
tempgreetwarn=yes
usedirectory=yes
[default]
[]
2102 => 30320,Greg Thwaites,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2103 => 30320,AGI Mark G,[email protected],,=|attach=yes|saycid=no|envelope=no|delete=no
2104 => 30320,AGI Mark P,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2108 => 30320,AGI Al Gibson,[email protected],,=|attach=yes|saycid=no|envelope=no|delete=no
2109 => 30320,AGI Jim Horn,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2114 => 30320,KE Imp,,,=|attach=no|saycid=no|envelope=no|delete=no
2115 => 30320,KE Imp,,,=|attach=no|saycid=no|envelope=no|delete=no
2116 => 30320,KE Imp,,,=|attach=no|saycid=no|envelope=no|delete=no
2117 => 30320,KE Imp,,,=|attach=no|saycid=no|envelope=no|delete=no
2118 => 30320,KE Imp,,,=|attach=no|saycid=no|envelope=no|delete=no
2136 => 30320,BR Exp,,,=|attach=no|saycid=no|envelope=no|delete=no
2142 => 30320,AGI Manager,,,attach=yes|saycid=no|envelope=no|delete=no
2144 => 30320,KE Exp,,,=|attach=no|saycid=no|envelope=no|delete=no
2145 => 30320,KE Exp,,,=|attach=no|saycid=no|envelope=no|delete=no
2146 => 30320,KE Exp,,,=|attach=no|saycid=no|envelope=no|delete=no
2147 => 30320,AGI Imp,,,=|attach=no|saycid=no|envelope=no|delete=no
2153 => 30320,KE Rod C,,,attach=yes|saycid=no|envelope=no|delete=no
2154 => 30320,KE Randall,,,attach=yes|saycid=no|envelope=no|delete=no
2155 => 30320,KE Min Ko,,,attach=yes|saycid=no|envelope=no|delete=no
2156 => 30320,KE Tristan,,,attach=yes|saycid=no|envelope=no|delete=no
2158 => 30320,KE Angie,,,attach=yes|saycid=no|envelope=no|delete=no
2159 => 30320,KE Ops,,,attach=no|saycid=no|envelope=no|delete=no
2181 => 30320,BA Eddie Estrada,,,attach=no|saycid=no|envelope=no|delete=no
2100 => 30320,AGI Melynda,[email protected],,attach=yes|saycid=no|envelope=no|delete=yes
2148 => 30320,KE Charlie,,,attach=yes|saycid=no|envelope=no|delete=no
2149 => 30320,KE Don L,,,attach=yes|saycid=no|envelope=no|delete=no
2150 => 30320,KE Ken W,,,attach=yes|saycid=no|envelope=no|delete=no
2151 => 30320,KE Ops,,,attach=no|saycid=no|envelope=no|delete=no
2160 => 30320,KE April,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2201 => 2201,test2,,,attach=no|saycid=no|envelope=no|delete=no
2190 => 30320,Ramp,,,attach=no|saycid=no|envelope=no|delete=no
2105 => 30320,AGI Sam Obi,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2133 => 30320,CV Colleen,,,attach=yes|saycid=no|envelope=no|delete=no
2101 => 30320,CV Marc V,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2134 => 30320,CV Reserv,,,attach=yes|saycid=no|envelope=no|delete=no
2135 => 30320,CV Sales Mgr,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2138 => 30320,CV Ops,,,attach=no|saycid=no|envelope=no|delete=no
2139 => 30320,CV Ops,,,attach=yes|saycid=no|envelope=no|delete=no
2140 => 30320,CV Exp,,,attach=no|saycid=no|envelope=no|delete=no
2107 => 30320,Imp Supv,,,attach=yes|saycid=no|envelope=no|delete=no
2175 => 30320,BA Resv,,,attach=no|saycid=no|envelope=no|delete=no
2176 => 30320,BA Resv,,,attach=no|saycid=no|envelope=no|delete=no
2178 => 30320,BA Bill Riberyo,,,attach=no|saycid=no|envelope=no|delete=no
2179 => 30320,BA Jennifer Suess,,,attach=no|saycid=no|envelope=no|delete=no
2180 => 30320,BA Dirk Ufer,,,attach=no|saycid=no|envelope=no|delete=no
2182 => 30320,BA Dennis Petsche,,,attach=no|saycid=no|envelope=no|delete=no
2200 => 2200,PCS Engineer,[email protected],,attach=yes|saycid=no|envelope=no|delete=no
2299 => 48640,CQTest,,,attach=no|saycid=no|envelope=no|delete=no
In the directory for the mailboxes, 2102,2104,2112,2145,2175,2176,2178, and 2181 have been created. I see now that some of them are included in the list above and some not. Can someone answer me when the directory entry is made? This was a fresh install.