Hi ,
I’m trying to configure Vega 100G gateway for my freepbx installed on vmware, this is the first time I’m trying to configure Vega , I usually use Dahdi E1 card to connect PRI line , but this time since I’m using virtual machine I have no other choice .
Till now I was able to register the box with freepbx , ad under the Vega dashboard it says registered , however the e1/t1 show’s 0 .
I have pasted the trunk setting for your reference .
outgoing
Peer details
Trunk name : vega
username=vega
type=friend
secret=sangoma1
qualify=yes
insecure=port,invite
host=dynamic
dtmfmode=rfc2833
context=from-pstn
allow=gsm&ulaw&alaw
Incoming
user context : vegaIn
User details
type=friend
qualify=yes
insecure=port,invite
host=192.168.3.191
dtmfmode=rfc2833
context=from-pstn
allow=gsm&ulaw&alaw
Please let me know if Im doing any thing wrong , or I should do any thing extra .
FYR : I have also tried to follow these links :
Link 1: https://wiki.freepbx.org/display/VG/Registering+Vega+with+FreePBX
Link 2: https://wiki.freepbx.org/display/VG/Registering+with+multiple+PBXs