Strict RTP Learning - Help

FreePBX
1

Hi Team, I noticed when dialing out lately, there has been a long delay prior to ringing. I pulled up Asterisk and noticed the following logs:

Spawn extension (from-pstn, 2721111, 1) exited non-zero on ‘PJSIP/Flowroute-1-00000007’
– PJSIP/Flowroute-1-00000007 Internal Gosub(func-apply-sipheaders,s,1(7)) complete GOSUB_RETVAL=
– Called PJSIP/94720581*17052721111@Flowroute-1
– PJSIP/Flowroute-1-00000007 is making progress passing it to PJSIP/201-00000006
> 0x7f86cc001f80 – Strict RTP learning after remote address set to: 23.29.31.91:17184 (I am guessing Flowroute?)
> 0x7f8694016af0 – Strict RTP learning after remote address set to: 10.10.10.90:2288 (Internal Phone Extension)
– PJSIP/Flowroute-1-00000007 is making progress passing it to PJSIP/201-00000006
> 0x7f86cc001f80 – Strict RTP switching to RTP target address 23.29.31.91:17184 as source
> 0x7f8694016af0 – Strict RTP switching to RTP target address 10.10.10.90:2288 as source
> 0x7f8694016af0 – Strict RTP learning complete - Locking on source address 10.10.10.90:2288
> 0x7f86cc001f80 – Strict RTP learning complete - Locking on source address 23.29.31.91:17184
– PJSIP/Flowroute-1-00000007 answered PJSIP/201-00000006

Any suggestions? I am thinking the 23.29.31.91 IP is the Flowroute sip but the 10.10.10.90 is my Phone IP. Any ideas would be great!

2

Also - I have also been receiving an issue.

If I try to call my cell phone, sporadically, the phone will just ring but my cell phone will never receive the actual call. If I call back a 2nd or 3rd time, it’ll eventually flow through. I’ll try to get logs for this.

3

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.