Is there a way to utilize a single FreePBX Server for multiple single office tenants? Where we can isolate each tenant from communicating/dialing extensions of the other tenants?? I have a client of mine that is running a PBXact system on the 2nd floor for their management company. They own the 1…

FreePBX is not designed to be a Multi-Tenant system. You can do some things, but honestly, it is not worth it. If you want Multi-Tenant, you need to look at something else. It could still be Asterisk based, but it is not something FreePBX can easily handle.

I didnt think so after trying to draw up different configurations and make it work here in a test environment but thought I would post to see if Im missing something and people are doing it. Sounds like my thinking was correct… Individual Vultr installs might be the route… Only cost is minimal mo…

Look at Freeswitch/Fusion PBX or VitalPBX. [image] Home - FreeSWITCH FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a versatile software implementation that runs on any commodity hardware. From a Raspberry PI to a mu…

Thanks. I think we will just go the Vultr Hosted FreePBX route for each tenant…

A Vultr VM for each of the offices is a good solution, but don’t underestimate the power of a local VM Host as well. It all depends on what resources (network, power, internet, etc.) you have.

If you have of lots of little 2-6 extension clients, then you can fit literally dozens on a $5 multi-tenant, multi-domained type PBX as mentioned, The basics are all there, the Sophistication of a full blown PBX is there but more complicated to set up but it is rarely necessary for the mom-and-pop …

Multiple Tenants - 1 FreePBX System?

FreePBX Configuration

comtech (Com Tech) July 7, 2021, 6:04pm 4

Look at Freeswitch/Fusion PBX or VitalPBX.

https://www.fusionpbx.com/