FreePBX Community Forums

Intercom calling, channels get stuck

princetech (PTC) April 16, 2018, 11:49pm 1

FreePBX 14 (Sangoma 7 iso) & Asterisk 13 or 15, fully updated, & yealink phones

Any intercom call, the channel gets stuck post hangup and i have to log into asterisk to “kill” it.

Happening on two separate deployments, any help would be greatly appreciated.

Paging group 'stuck' open when original extension hung up

PitzKey (Itzik) April 17, 2018, 6:29am 2

Can you post a call log?

princetech (PTC) April 17, 2018, 10:50pm 3

Connected to Asterisk 15.2.2 currently running on sme (pid = 2067)
smeCLI> core show channels
Channel Location State Application(Data)
PJSIP/361-0000000a s@macro-dial-one:53 Up Dial(PJSIP/360/sip:[email protected].
PJSIP/361-0000000e s@macro-dial-one:53 Up Dial(PJSIP/360/sip:[email protected].
PJSIP/360-0000000f (None) Up AppDial((Outgoing Line))
PJSIP/360-0000000b (None) Up AppDial((Outgoing Line))
PJSIP/360-00000004 s@macro-dial-one:53 Up Dial(PJSIP/361/sip:[email protected].
PJSIP/361-00000005 (None) Up AppDial((Outgoing Line))
6 active channels
3 active calls
14 calls processed
smeCLI> channel request hangup all
Requested Hangup on channel ‘PJSIP/360-0000000b’
Requested Hangup on channel ‘PJSIP/360-0000000f’
Requested Hangup on channel ‘PJSIP/360-00000004’
Requested Hangup on channel ‘PJSIP/361-0000000a’
Requested Hangup on channel ‘PJSIP/361-0000000e’
Requested Hangup on channel ‘PJSIP/361-00000005’
– Channel PJSIP/360-0000000b left ‘simple_bridge’ basic-bridge <53442972-3b 2e-4700-8a45-d17d54a7ad18>
– Channel PJSIP/360-00000004 left ‘simple_bridge’ basic-bridge
– Channel PJSIP/361-0000000a left ‘simple_bridge’ basic-bridge <53442972-3b 2e-4700-8a45-d17d54a7ad18>
== Spawn extension (macro-dial-one, s, 53) exited non-zero on ‘PJSIP/360-00000 004’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 20) exited non-zero on ‘PJSIP/360-00000 004’ in macro ‘exten-vm’
== Spawn extension (macro-dial-one, s, 53) exited non-zero on ‘PJSIP/361-00000 00a’ in macro ‘dial-one’
== Spawn extension (from-internal, 361, 2) exited non-zero on ‘PJSIP/360-00000 004’
== Spawn extension (macro-exten-vm, s, 20) exited non-zero on ‘PJSIP/361-00000 00a’ in macro ‘exten-vm’
– Executing [h@from-internal:1] Macro(“PJSIP/360-00000004”, “hangupcall”) i n new stack
== Spawn extension (from-internal, 360, 2) exited non-zero on ‘PJSIP/361-00000 00a’
– Executing [h@from-internal:1] Macro(“PJSIP/361-0000000a”, “hangupcall”) i n new stack
– Executing [s@macro-hangupcall:1] GotoIf(“PJSIP/360-00000004”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Channel PJSIP/361-00000005 left ‘simple_bridge’ basic-bridge
– Executing [s@macro-hangupcall:1] GotoIf(“PJSIP/361-0000000a”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Channel PJSIP/360-0000000f left ‘simple_bridge’ basic-bridge <8b7e9a33-3f 9b-497f-8155-8b599a2d2e82>
– Channel PJSIP/361-0000000e left ‘simple_bridge’ basic-bridge <8b7e9a33-3f 9b-497f-8155-8b599a2d2e82>
== Spawn extension (macro-dial-one, s, 53) exited non-zero on ‘PJSIP/361-00000 00e’ in macro ‘dial-one’
– Executing [s@macro-hangupcall:3] ExecIf(“PJSIP/360-00000004”, “0?Set(CDR( recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] NoOp(“PJSIP/360-00000004”, "PJSIP/361-00 000005 monior file= ") in new stack
– Executing [s@macro-hangupcall:5] AGI(“PJSIP/360-00000004”, “attendedtrans fer-rec-restart.php,PJSIP/361-00000005,”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/attendedtransfer-rec-restar t.php
– Executing [s@macro-hangupcall:3] ExecIf(“PJSIP/361-0000000a”, “0?Set(CDR( recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] NoOp(“PJSIP/361-0000000a”, "PJSIP/360-00 00000b monior file= ") in new stack
– Executing [s@macro-hangupcall:5] AGI(“PJSIP/361-0000000a”, “attendedtrans fer-rec-restart.php,PJSIP/360-0000000b,”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/attendedtransfer-rec-restar t.php
== Spawn extension (macro-exten-vm, s, 20) exited non-zero on ‘PJSIP/361-00000 00e’ in macro ‘exten-vm’
== Spawn extension (from-internal, 360, 2) exited non-zero on ‘PJSIP/361-00000 00e’
– Executing [h@from-internal:1] Macro(“PJSIP/361-0000000e”, “hangupcall”) i n new stack
– Executing [s@macro-hangupcall:1] GotoIf(“PJSIP/361-0000000e”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“PJSIP/361-0000000e”, “0?Set(CDR( recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] NoOp(“PJSIP/361-0000000e”, "PJSIP/360-00 00000f monior file= ") in new stack
– Executing [s@macro-hangupcall:5] AGI(“PJSIP/361-0000000e”, “attendedtrans fer-rec-restart.php,PJSIP/360-0000000f,”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/attendedtransfer-rec-restar t.php
– <PJSIP/361-0000000a>AGI Script attendedtransfer-rec-restart.php completed , returning 0
– <PJSIP/360-00000004>AGI Script attendedtransfer-rec-restart.php completed , returning 0
– Executing [s@macro-hangupcall:6] Hangup(“PJSIP/361-0000000a”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 6) exited non-zero on ‘PJSIP/361-0000 000a’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on ‘PJSIP/361-0000000 a’
– Executing [s@macro-hangupcall:6] Hangup(“PJSIP/360-00000004”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 6) exited non-zero on ‘PJSIP/360-0000 0004’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on ‘PJSIP/360-0000000 4’
– <PJSIP/361-0000000e>AGI Script attendedtransfer-rec-restart.php completed , returning 0
– Executing [s@macro-hangupcall:6] Hangup(“PJSIP/361-0000000e”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 6) exited non-zero on ‘PJSIP/361-0000 000e’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on ‘PJSIP/361-0000000 e’
== Setting global variable ‘SIPDOMAIN’ to ‘10.30.49.250’
== Using SIP RTP Audio TOS bits 184
== Using SIP RTP Audio TOS bits 184 in TCLASS field.
== Using SIP RTP Audio CoS mark 5
– Executing [*80361@from-internal:1] Goto(“PJSIP/360-00000013”, “ext-interc om,*80361,1”) in new stack
– Goto (ext-intercom,*80361,1)
– Executing [*80361@ext-intercom:1] Set(“PJSIP/360-00000013”, “__COS_DEST=i ntercom-prefix”) in new stack
– Executing [*80361@ext-intercom:2] Set(“PJSIP/360-00000013”, “_COS_TYPE=F C") in new stack
– Executing [*80361@ext-intercom:3] Macro(“PJSIP/360-00000013”, “user-calle rid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“PJSIP/360-00000013”, “TOUCH_MONI TOR=1524003692.26”) in new stack
– Executing [s@macro-user-callerid:2] Set(“PJSIP/360-00000013”, “AMPUSER=36 0”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“PJSIP/360-00000013”, “0?repor t”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“PJSIP/360-00000013”, “1?Set(R EALCALLERIDNUM=360)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“PJSIP/360-00000013”, “AMPUSER=36 0”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“PJSIP/360-00000013”, "0?limit ") in new stack
– Executing [s@macro-user-callerid:7] Set(“PJSIP/360-00000013”, “AMPUSERCID NAME=Test-T46G”) in new stack
– Executing [s@macro-user-callerid:8] ExecIf(“PJSIP/360-00000013”, "0?Set( _CIDMASQUERADING=TRUE)”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“PJSIP/360-00000013”, “0?repor t”) in new stack
– Executing [s@macro-user-callerid:10] Set(“PJSIP/360-00000013”, “AMPUSERCI D=360”) in new stack
– Executing [s@macro-user-callerid:11] Set(“PJSIP/360-00000013”, “__DIAL_OP TIONS=HhTtr”) in new stack
– Executing [s@macro-user-callerid:12] Set(“PJSIP/360-00000013”, “CALLERID( all)=“Test-T46G” <360>”) in new stack
[2018-04-17 22:21:32] WARNING[20398][C-0000000f]: ast_expr2.fl:470 ast_yyerror: ast_yyerror(): syntax error: syntax error, unexpected ‘>’, expecting ‘-’ or ‘!’ or ‘(’ or ‘’; Input:
“”=“LIMIT” & 3 & 1 & >0 & 0>=
^
[2018-04-17 22:21:32] WARNING[20398][C-0000000f]: ast_expr2.fl:474 ast_yyerror: If you have questions, please refer to https://wiki.asterisk.org/wiki/display/AS T/Channel+Variables
– Executing [s@macro-user-callerid:13] GotoIf(“PJSIP/360-00000013”, “0?limi t”) in new stack
– Executing [s@macro-user-callerid:14] ExecIf(“PJSIP/360-00000013”, “0?Set( GROUP(concurrency_limit)=360)”) in new stack
– Executing [s@macro-user-callerid:15] ExecIf(“PJSIP/360-00000013”, “0?Set( CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:16] NoOp(“PJSIP/360-00000013”, “Macro De pth is 1”) in new stack
– Executing [s@macro-user-callerid:17] GotoIf(“PJSIP/360-00000013”, “1?repo rt2:macroerror”) in new stack
– Goto (macro-user-callerid,s,19)
– Executing [s@macro-user-callerid:19] GotoIf(“PJSIP/360-00000013”, “0?cont inue”) in new stack
– Executing [s@macro-user-callerid:20] Set(“PJSIP/360-00000013”, “__TTL=64” ) in new stack
– Executing [s@macro-user-callerid:21] GotoIf(“PJSIP/360-00000013”, “1?cont inue”) in new stack
– Goto (macro-user-callerid,s,37)
– Executing [s@macro-user-callerid:37] Set(“PJSIP/360-00000013”, “CALLERID( number)=360”) in new stack
– Executing [s@macro-user-callerid:38] Set(“PJSIP/360-00000013”, “CALLERID( name)=Test-T46G”) in new stack
– Executing [s@macro-user-callerid:39] GotoIf(“PJSIP/360-00000013”, "0?cnum ") in new stack
– Executing [s@macro-user-callerid:40] Set(“PJSIP/360-00000013”, “CDR(cnam) =Test-T46G”) in new stack
– Executing [s@macro-user-callerid:41] Set(“PJSIP/360-00000013”, “CDR(cnum) =360”) in new stack
– Executing [s@macro-user-callerid:42] Set(“PJSIP/360-00000013”, “CHANNEL(l anguage)=en”) in new stack
– Executing [s@macro-user-callerid:43] GosubIf(“PJSIP/360-00000013”, “1?app -check-classofservce,s,1()”) in new stack
– Executing [s@app-check-classofservce:1] NoOp(“PJSIP/360-00000013”, “Start ing COS Check”) in new stack
– Executing [s@app-check-classofservce:2] AGI(“PJSIP/360-00000013”, “cos.ag i”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/cos.agi
cos.agi: Starting Class Of Service checks
– cos.agi: 360 is not a member of any CoS
– <PJSIP/360-00000013>AGI Script cos.agi completed, returning 0
– Executing [s@app-check-classofservce:3] Return(“PJSIP/360-00000013”, “”) in new stack
– Executing [*80361@ext-intercom:4] Macro(“PJSIP/360-00000013”, “user-calle rid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“PJSIP/360-00000013”, “TOUCH_MONI TOR=1524003692.26”) in new stack
– Executing [s@macro-user-callerid:2] Set(“PJSIP/360-00000013”, “AMPUSER=36 0”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“PJSIP/360-00000013”, “9?repor t”) in new stack
– Goto (macro-user-callerid,s,16)
– Executing [s@macro-user-callerid:16] NoOp(“PJSIP/360-00000013”, “Macro De pth is 1”) in new stack
– Executing [s@macro-user-callerid:17] GotoIf(“PJSIP/360-00000013”, “1?repo rt2:macroerror”) in new stack
– Goto (macro-user-callerid,s,19)
– Executing [s@macro-user-callerid:19] GotoIf(“PJSIP/360-00000013”, “0?cont inue”) in new stack
– Executing [s@macro-user-callerid:20] Set(“PJSIP/360-00000013”, “__TTL=63” ) in new stack
– Executing [s@macro-user-callerid:21] GotoIf(“PJSIP/360-00000013”, “1?cont inue”) in new stack
– Goto (macro-user-callerid,s,37)
– Executing [s@macro-user-callerid:37] Set(“PJSIP/360-00000013”, “CALLERID( number)=360”) in new stack
– Executing [s@macro-user-callerid:38] Set(“PJSIP/360-00000013”, “CALLERID( name)=Test-T46G”) in new stack
– Executing [s@macro-user-callerid:39] GotoIf(“PJSIP/360-00000013”, "0?cnum ") in new stack
– Executing [s@macro-user-callerid:40] Set(“PJSIP/360-00000013”, “CDR(cnam) =Test-T46G”) in new stack
– Executing [s@macro-user-callerid:41] Set(“PJSIP/360-00000013”, “CDR(cnum) =360”) in new stack
– Executing [s@macro-user-callerid:42] Set(“PJSIP/360-00000013”, “CHANNEL(l anguage)=en”) in new stack
– Executing [s@macro-user-callerid:43] GosubIf(“PJSIP/360-00000013”, “1?app -check-classofservce,s,1()”) in new stack
– Executing [s@app-check-classofservce:1] NoOp(“PJSIP/360-00000013”, “Start ing COS Check”) in new stack
– Executing [s@app-check-classofservce:2] AGI(“PJSIP/360-00000013”, “cos.ag i”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/cos.agi
cos.agi: Starting Class Of Service checks
– cos.agi: 360 is not a member of any CoS
– <PJSIP/360-00000013>AGI Script cos.agi completed, returning 0
– Executing [s@app-check-classofservce:3] Return(“PJSIP/360-00000013”, “”) in new stack
– Executing [*80361@ext-intercom:5] Set(“PJSIP/360-00000013”, “dialnumber=3 61”) in new stack
– Executing [*80361@ext-intercom:6] Set(“PJSIP/360-00000013”, “INTERCOM_CAL L=TRUE”) in new stack
– Executing [*80361@ext-intercom:7] Gosub(“PJSIP/360-00000013”, “sub-record -check,s,1(exten,361)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“PJSIP/360-00000013”, “0?initiali zed”) in new stack
– Executing [s@sub-record-check:2] Set(“PJSIP/360-00000013”, “__REC_STATUS= INITIALIZED”) in new stack
– Executing [s@sub-record-check:3] Set(“PJSIP/360-00000013”, “NOW=152400369 2”) in new stack
– Executing [s@sub-record-check:4] Set(“PJSIP/360-00000013”, “__DAY=17”) in new stack
– Executing [s@sub-record-check:5] Set(“PJSIP/360-00000013”, “__MONTH=04”) in new stack
– Executing [s@sub-record-check:6] Set(“PJSIP/360-00000013”, “__YEAR=2018”) in new stack
– Executing [s@sub-record-check:7] Set(“PJSIP/360-00000013”, “__TIMESTR=201 80417-222132”) in new stack
– Executing [s@sub-record-check:8] Set(“PJSIP/360-00000013”, “__FROMEXTEN=3 60”) in new stack
– Executing [s@sub-record-check:9] Set(“PJSIP/360-00000013”, "__MON_FMT=wav ") in new stack
– Executing [s@sub-record-check:10] NoOp(“PJSIP/360-00000013”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“PJSIP/360-00000013”, “1?Set(ARG 3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“PJSIP/360-00000013”, “REC_POLICY_M ODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“PJSIP/360-00000013”, “0?Set(REC _STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“PJSIP/360-00000013”, “5?checkac tion”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“PJSIP/360-00000013”, “1?sub-rec ord-check,exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] NoOp(“PJSIP/360-00000013”, “Exten Re cording Check between 360 and 361”) in new stack
– Executing [exten@sub-record-check:2] Set(“PJSIP/360-00000013”, “CALLTYPE= internal”) in new stack
– Executing [exten@sub-record-check:3] ExecIf(“PJSIP/360-00000013”, “0?Set( CALLTYPE=)”) in new stack
– Executing [exten@sub-record-check:4] Set(“PJSIP/360-00000013”, “CALLEE=do ntcare”) in new stack
– Executing [exten@sub-record-check:5] ExecIf(“PJSIP/360-00000013”, “0?Set( CALLEE=dontcare)”) in new stack
– Executing [exten@sub-record-check:6] GotoIf(“PJSIP/360-00000013”, “0?call ee”) in new stack
– Executing [exten@sub-record-check:7] GotoIf(“PJSIP/360-00000013”, “1?call er”) in new stack
– Goto (sub-record-check,exten,13)
– Executing [exten@sub-record-check:13] Set(“PJSIP/360-00000013”, “RECMODE= dontcare”) in new stack
– Executing [exten@sub-record-check:14] ExecIf(“PJSIP/360-00000013”, “0?Set (RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:15] ExecIf(“PJSIP/360-00000013”, “1?Set (RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:16] Gosub(“PJSIP/360-00000013”, “record check,1(dontcare,internal,361)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“PJSIP/360-00000013”, “St arting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“PJSIP/360-00000013”, “do ntcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“PJSIP/360-00000013”, " ") in new stack
– Executing [exten@sub-record-check:17] Return(“PJSIP/360-00000013”, “”) in new stack
– Executing [*80361@ext-intercom:8] GotoIf(“PJSIP/360-00000013”, “0?end”) i n new stack
– Executing [*80361@ext-intercom:9] GotoIf(“PJSIP/360-00000013”, “0?end”) i n new stack
– Executing [*80361@ext-intercom:10] GotoIf(“PJSIP/360-00000013”, “0?allow” ) in new stack
– Executing [*80361@ext-intercom:11] GotoIf(“PJSIP/360-00000013”, “0?nointe rcom”) in new stack
– Executing [*80361@ext-intercom:12] GotoIf(“PJSIP/360-00000013”, “0?nointe rcom”) in new stack
– Executing [*80361@ext-intercom:13] Set(“PJSIP/360-00000013”, "DEVICES=361 ") in new stack
– Executing [*80361@ext-intercom:14] GotoIf(“PJSIP/360-00000013”, “0?end”) in new stack
– Executing [*80361@ext-intercom:15] Set(“PJSIP/360-00000013”, “OVERRIDE=”) in new stack
– Executing [*80361@ext-intercom:16] Set(“PJSIP/360-00000013”, “LOOPCNT=1”) in new stack
– Executing [*80361@ext-intercom:17] Set(“PJSIP/360-00000013”, “_SIPURI=”) in new stack
– Executing [*80361@ext-intercom:18] Set(“PJSIP/360-00000013”, “_ALERTINFO= Ring Answer”) in new stack
– Executing [*80361@ext-intercom:19] Set(“PJSIP/360-00000013”, “_CALLINFO=< uri>;answer-after=0”) in new stack
– Executing [*80361@ext-intercom:20] Set(“PJSIP/360-00000013”, “_SIPURI=int ercom=true”) in new stack
– Executing [*80361@ext-intercom:21] Set(“PJSIP/360-00000013”, “_DTIME=5”) in new stack
– Executing [*80361@ext-intercom:22] Set(“PJSIP/360-00000013”, “_ANSWERMACR O=”) in new stack
– Executing [*80361@ext-intercom:23] GotoIf(“PJSIP/360-00000013”, “0?pagemo de”) in new stack
– Executing [*80361@ext-intercom:24] Macro(“PJSIP/360-00000013”, “autoanswe r,361”) in new stack
– Executing [s@macro-autoanswer:1] GotoIf(“PJSIP/360-00000013”, “0?knowndia l”) in new stack
– Executing [s@macro-autoanswer:2] Set(“PJSIP/360-00000013”, “DEVICE=PJSIP/ 361”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“PJSIP/360-00000013”, “1?dopjsip” ) in new stack
– Goto (macro-autoanswer,s,6)
– Executing [s@macro-autoanswer:6] Set(“PJSIP/360-00000013”, “KNOWNDIAL=PJS IP/361/sip:[email protected]:51719”) in new stack
– Executing [s@macro-autoanswer:7] GotoIf(“PJSIP/360-00000013”, “1?knowndia l”) in new stack
– Goto (macro-autoanswer,s,19)
– Executing [s@macro-autoanswer:19] Set(“PJSIP/360-00000013”, “DIAL=PJSIP/3 61/sip:[email protected]:51719”) in new stack
– Executing [s@macro-autoanswer:20] ExecIf(“PJSIP/360-00000013”, “0?Set(DIA L=DAHDIIP/361/sip:[email protected]:51719)”) in new stack
– Executing [s@macro-autoanswer:21] GotoIf(“PJSIP/360-00000013”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:22] GotoIf(“PJSIP/360-00000013”, "1?pjsipua ") in new stack
– Goto (macro-autoanswer,s,25)
– Executing [s@macro-autoanswer:25] Set(“PJSIP/360-00000013”, “AOR=361”) in new stack
– Executing [s@macro-autoanswer:26] Set(“PJSIP/360-00000013”, “CONTACT=361; @2cdd234378c47dcb3269064a5fc3f1a8”) in new stack
– Executing [s@macro-autoanswer:27] Set(“PJSIP/360-00000013”, “USERAGENT=Ye alink SIP-T58 58.80.0.10”) in new stack
– Executing [s@macro-autoanswer:28] ExecIf(“PJSIP/360-00000013”, “0?Set(USE RAGENT=)”) in new stack
– Executing [s@macro-autoanswer:29] ExecIf(“PJSIP/360-00000013”, “0?Set(PAG E_VOL=;volume=)”) in new stack
– Executing [s@macro-autoanswer:30] ExecIf(“PJSIP/360-00000013”, “0?Set(ALE RTINFO=ring-answer)”) in new stack
– Executing [s@macro-autoanswer:31] ExecIf(“PJSIP/360-00000013”, “0?Set(CAL LINFO=sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:32] ExecIf(“PJSIP/360-00000013”, “0?Set(ALE RTINFO=http://example.com;info=alert-autoanswer)”) in new stack
– Executing [s@macro-autoanswer:33] ExecIf(“PJSIP/360-00000013”, “0?Set(ALE RTINFO=Intercom)”) in new stack
– Executing [s@macro-autoanswer:34] ExecIf(“PJSIP/360-00000013”, “0?Set(ALE RTINFO=Alert-Info: Auto Answer)”) in new stack
– Executing [s@macro-autoanswer:35] ExecIf(“PJSIP/360-00000013”, “0?Set(ALE RTINFO=http://www.sangoma.com;info=external)”) in new stack
– Executing [s@macro-autoanswer:36] ExecIf(“PJSIP/360-00000013”, “1?Set(__S IP_URI_OPTIONS=intercom=true)”) in new stack
– Executing [*80361@ext-intercom:25] Set(“PJSIP/360-00000013”, “_DOPTIONS=A (beep)b(autoanswer^s^1(Ring Answer,;answer-after=0))”) in new stack
– Executing [*80361@ext-intercom:26] ChanIsAvail(“PJSIP/360-00000013”, “PJS IP/361,s”) in new stack
– Executing [*80361@ext-intercom:27] ExecIf(“PJSIP/360-00000013”, “0?Set(AV AILORIGCHAN=PJSIP/361)”) in new stack
– Executing [*80361@ext-intercom:28] GotoIf(“PJSIP/360-00000013”, “1?contin ue”) in new stack
– Goto (ext-intercom,*80361,33)
– Executing [*80361@ext-intercom:33] NoOp(“PJSIP/360-00000013”, “Continuing with page”) in new stack
– Executing [*80361@ext-intercom:34] GotoIf(“PJSIP/360-00000013”, "0?godial ") in new stack
– Executing [*80361@ext-intercom:35] Set(“PJSIP/360-00000013”, “CONNECTEDLI NE(name,i)=361”) in new stack
– Executing [*80361@ext-intercom:36] Set(“PJSIP/360-00000013”, “CONNECTEDLI NE(num)=361”) in new stack
– Executing [*80361@ext-intercom:37] Dial(“PJSIP/360-00000013”, “PJSIP/361/ sip:[email protected]:51719,5,IA(beep)b(autoanswer^s^1(Ring Answer,;answer-a fter=0))”) in new stack
– PJSIP/361-00000015 Internal Gosub(autoanswer,s,1(Ring Answer,;answer -after=0)) start
– Executing [s@autoanswer:1] GosubIf(“PJSIP/361-00000015”, “1?func-set-siph eader,s,1(Alert-Info,Ring Answer)”) in new stack
– Executing [s@func-set-sipheader:1] NoOp(“PJSIP/361-00000015”, “Sip Add He ader function called. Adding Alert-Info = Ring Answer”) in new stack
– Executing [s@func-set-sipheader:2] Set(“PJSIP/361-00000015”, “HASH(_SIPHE ADERS,Alert-Info)=Ring Answer”) in new stack
– Executing [s@func-set-sipheader:3] Return(“PJSIP/361-00000015”, “”) in ne w stack
– Executing [s@autoanswer:2] GosubIf(“PJSIP/361-00000015”, “1?func-set-siph eader,s,1(Call-Info,;answer-after=0)”) in new stack
– Executing [s@func-set-sipheader:1] NoOp(“PJSIP/361-00000015”, “Sip Add He ader function called. Adding Call-Info = ;answer-after=0”) in new stack
– Executing [s@func-set-sipheader:2] Set(“PJSIP/361-00000015”, “HASH(_SIPHE ADERS,Call-Info)=;answer-after=0”) in new stack
– Executing [s@func-set-sipheader:3] Return(“PJSIP/361-00000015”, “”) in ne w stack
– Executing [s@autoanswer:3] Gosub(“PJSIP/361-00000015”, “func-apply-siphea ders,s,1()”) in new stack
– Executing [s@func-apply-sipheaders:1] NoOp(“PJSIP/361-00000015”, “Applyin g SIP Headers to channel”) in new stack
– Executing [s@func-apply-sipheaders:2] Set(“PJSIP/361-00000015”, “SIPHEADE RKEYS=Call-Info,Alert-Info”) in new stack
– Executing [s@func-apply-sipheaders:3] While(“PJSIP/361-00000015”, “1”) in new stack
– Executing [s@func-apply-sipheaders:4] Set(“PJSIP/361-00000015”, “sipheade r=;answer-after=0”) in new stack
– Executing [s@func-apply-sipheaders:5] SIPAddHeader(“PJSIP/361-00000015”, “Call-Info: ;answer-after=0”) in new stack
– Executing [s@func-apply-sipheaders:6] Set(“PJSIP/361-00000015”, “PJSIP_HE ADER(add,Call-Info)=;answer-after=0”) in new stack
– Executing [s@func-apply-sipheaders:7] EndWhile(“PJSIP/361-00000015”, “”) in new stack
– Executing [s@func-apply-sipheaders:3] While(“PJSIP/361-00000015”, “1”) in new stack
– Executing [s@func-apply-sipheaders:4] Set(“PJSIP/361-00000015”, “sipheade r=Ring Answer”) in new stack
– Executing [s@func-apply-sipheaders:5] SIPAddHeader(“PJSIP/361-00000015”, “Alert-Info: Ring Answer”) in new stack
– Executing [s@func-apply-sipheaders:6] Set(“PJSIP/361-00000015”, “PJSIP_HE ADER(add,Alert-Info)=Ring Answer”) in new stack
– Executing [s@func-apply-sipheaders:7] EndWhile(“PJSIP/361-00000015”, “”) in new stack
– Executing [s@func-apply-sipheaders:3] While(“PJSIP/361-00000015”, “0”) in new stack
– Executing [s@func-apply-sipheaders:8] Return(“PJSIP/361-00000015”, “”) in new stack
– Executing [s@autoanswer:4] Return(“PJSIP/361-00000015”, “”) in new stack
== Spawn extension (from-internal, *80361, 1) exited non-zero on ‘PJSIP/361-00 000015’
– PJSIP/361-00000015 Internal Gosub(autoanswer,s,1(Ring Answer,;answer -after=0)) complete GOSUB_RETVAL=
– Called PJSIP/361/sip:[email protected]:51719
== Using SIP RTP Audio TOS bits 184
== Using SIP RTP Audio TOS bits 184 in TCLASS field.
== Using SIP RTP Audio CoS mark 5
– Connected line update to PJSIP/360-00000013 prevented.
– PJSIP/361-00000015 is ringing
> 0x7f97b407d180 – Strict RTP learning after remote address set to: 10.1 16.1.240:50102
– PJSIP/361-00000015 answered PJSIP/360-00000013
– <PJSIP/361-00000015> Playing ‘beep.ulaw’ (language ‘en’)
> 0x7f97b407d180 – Strict RTP switching to RTP target address 10.116.1.2 40:50102 as source
> 0x7f97ac081060 – Strict RTP learning after remote address set to: 10.1 16.1.58:11796
– Channel PJSIP/361-00000015 joined ‘simple_bridge’ basic-bridge <ce8646b4- 5dd4-4d64-9f7d-745ad6417412>
– Channel PJSIP/360-00000013 joined ‘simple_bridge’ basic-bridge <ce8646b4- 5dd4-4d64-9f7d-745ad6417412>
> 0x7f97ac081060 – Strict RTP switching to RTP target address 10.116.1.5 8:11796 as source
> 0x7f97b407d180 – Strict RTP learning complete - Locking on source addr ess 10.116.1.240:50102

system (system) Closed April 17, 2019, 10:50pm 4

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.