GXW4108 and PJSIP

FreePBX Endpoints
1

Using a GXW4108

How could i configure this with PJSIP

i was able to get this in FreePBX

<— Received SIP response (561 bytes) from UDP:192.168.2.176:5060 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.2.69:5060;rport;branch=z9hG4bKPj1074e1e5-64df-4b2c-b1a6-8e4e5eb75f73
From: sip:[email protected];tag=7fea89cc-5ee9-4b45-a185-38a178b04f4e
To: sip:[email protected];tag=z9hG4bK8fe23cf259a50d67
Call-ID: d7d1ac49-f7a0-4589-8641-ee846c07ae72
CSeq: 63478 OPTIONS
User-Agent: Grandstream GXW4108 (HW 2.3, Ch:8) 1.4.1.5
Contact: sip:[email protected]:5060;transport=udp
Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE,UPDATE,PRACK
Supported: replaces, timer, 100rel, path
Content-Length: 0

the Trunk shows as ONLINE

however i get this error

[2022-10-30 10:21:18] NOTICE[14891][C-00000017]: chan_sip.c:19648 send_check_user_failure_response: Failed to authenticate device "CID"sip:[email protected];tag=633508921ba064c1 for INVITE, code = -1

2

Add the pjsip port to the grandstream settings. If chan_sip is still on 5060 and the grandstream is set to that port it will send requests to the wrong driver.

3

yea that was it i totally didn’t see the failed to authenticate said chan_sip

4

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.