ok so i have freepbx17 it was working and then all of a sudden it stopped nothing was changed nothing at all so far i have done the following i reinstalled freepbx (fresh copy), turned off firewall, i placed the pbx system on a spare WAN address so i could eliminate NAT, i moved the entire network to a different router, i use voip.ms for trunks i went and got a DID from clearlyip still same error all trunks show as registered in both voip.ms and clearlyip i tried to look at the log in freepbx but i don’t understand what I’m reading or what to look for im out of ideas need help
Do your extensions, outbound routes, and trunks have proper caller ID ?
it was solved I’m an idiot i had voip.ms run a test on outgoing calls they said the call was connected correctly and att was terminating the call every time so i went into att and showed then what was going on and it turned out that the spam filter on my cell phone was terminating the call because all the DID numbers were not listed in my phone book and i had it programed to disconnect the numbers that are not in my phone book lol needless to say i adjusted my spam filter and felt stupid leaving the store i have been working on this for about 3 weeks and now i have to reprogram the pbx to but i do thank you for the help though