BLF and LED Custom Configuration

[RMDATA (Bob Masters)]

We are using a PBXact - FreePBX and trying to configure either a Sangoma or a Digium Endpoint/Phone to extinguish the BLF during an idle status

From our research, it looks like this was touched on in this post:

BLF on Sangoma 500 lit when extension is idle

Hi, My setup is FreePBX 13.0.190.19, Asterisk 13.14.0, 2x Sangoma S500 phones with Firmware 2.0.4.0 I’m testing a couple of Sangoma S500 phones on a test FreePBX system and am having problems getting the BLF feature working properly. I’ve configured a BLF on one extension to monitor the other extension. The issue I’m having is that BLF light is on solid green even when the other extension is idle. I’ve run ‘show core hints’ in the Asterisk CLI and it confirms that the status of the extension…

We believe it’s possible in Base file editor under endpoint manager with either XML or P-codes but have not found the exact area in either to change the BLF or LED Behavior for the 3 status options of red, green or Extinguished/Off

Thanks for any help