I had installed FreePBX 2.9.0.12 with sangoma a200 card and grandstream gxw4024 device to connect with all analog phone.
unable to call outside trunk and incoming trunk whereas only internal extension are working .
please check given log and let me know further troubleshoot.
regds
wasi
You sent no logs. Please provide console output of what happens when you try to make a call.
Did you install FreePBX from a Distro or did you build it by hand? If by hand what version of Asterisk? Did you install wanpipe for the Sangoma card?
Elastix 2.3.0 rc1 with sangoma a200 pci card
FreePBX 2.9.0
sangoma with wanpipe1 3.6.0
pls find log.
trying to call from ext 126 to mobile 7498249788
[Mar 29 16:56:45] NOTICE[7671] chan_dahdi.c: Alarm cleared on channel 29
[Mar 29 16:56:45] NOTICE[7671] chan_dahdi.c: Alarm cleared on channel 30
[Mar 29 16:56:45] NOTICE[7671] chan_dahdi.c: Alarm cleared on channel 31
[Mar 29 16:56:45] NOTICE[7670] chan_dahdi.c: PRI got event: No more alarm (5) on D-channel of span 1
[Mar 29 16:58:09] VERBOSE[8328] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 16:58:43] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 16:58:43] VERBOSE[8533] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 16:58:46] VERBOSE[7670] sig_pri.c: – Restart requested on entire span 1
[Mar 29 16:59:04] NOTICE[7656] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 16:59:04] NOTICE[7657] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:00:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:00:01] VERBOSE[9010] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:03:48] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:03:59] NOTICE[7662] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:03:59] NOTICE[7663] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:05:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:05:01] VERBOSE[10828] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:07:15] VERBOSE[10388] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:07:47] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:08:10] VERBOSE[11856] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:08:54] NOTICE[7658] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:08:54] NOTICE[7659] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:10:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:10:01] VERBOSE[12668] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:13:40] VERBOSE[7669] netsock2.c: == Using SIP RTP TOS bits 184
[Mar 29 17:13:40] VERBOSE[7669] netsock2.c: == Using SIP RTP CoS mark 5
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/119-00000000”, “0?Set(__RINGTIMER=0)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] Macro(“SIP/119-00000000”, “exten-vm,novm,116,0,0,0”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] Macro(“SIP/119-00000000”, “user-callerid,”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] Set(“SIP/119-00000000”, “AMPUSER=119”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/119-00000000”, “0?report”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/119-00000000”, “1?Set(REALCALLERIDNUM=119)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:4] Set(“SIP/119-00000000”, “AMPUSER=119”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:5] Set(“SIP/119-00000000”, “AMPUSERCIDNAME=Murlidhar Chaturvedi”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/119-00000000”, “0?report”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:7] Set(“SIP/119-00000000”, “AMPUSERCID=119”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:8] Set(“SIP/119-00000000”, “CALLERID(all)=“Murlidhar Chaturvedi” <119>”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/119-00000000”, “0?limit”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:10] ExecIf(“SIP/119-00000000”, “0?Set(GROUP(concurrency_limit)=119)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:11] ExecIf(“SIP/119-00000000”, “0?Set(CHANNEL(language)=)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:12] GotoIf(“SIP/119-00000000”, “0?continue”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:13] Set(“SIP/119-00000000”, “__TTL=64”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:14] GotoIf(“SIP/119-00000000”, “1?continue”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-user-callerid,s,25)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:25] Set(“SIP/119-00000000”, “CALLERID(number)=119”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:26] Set(“SIP/119-00000000”, “CALLERID(name)=Murlidhar Chaturvedi”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:27] Set(“SIP/119-00000000”, “CHANNEL(language)=en”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] Set(“SIP/119-00000000”, “RingGroupMethod=none”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:3] Set(“SIP/119-00000000”, “__EXTTOCALL=116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:4] Set(“SIP/119-00000000”, “__PICKUPMARK=116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:5] Set(“SIP/119-00000000”, “RT=”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:6] Macro(“SIP/119-00000000”, “record-enable,116,IN”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/119-00000000”, “1?check”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/119-00000000”, “0?MacroExit()”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/119-00000000”, “0?Group:OUT”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-record-enable,s,15)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/119-00000000”, “1?IN”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-record-enable,s,20)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:20] ExecIf(“SIP/119-00000000”, “1?MacroExit()”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:7] Macro(“SIP/119-00000000”, “dial-one,tr,116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] Set(“SIP/119-00000000”, “DEXTEN=116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] Set(“SIP/119-00000000”, “DIALSTATUS_CW=”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:3] GosubIf(“SIP/119-00000000”, “0?screen,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:4] GosubIf(“SIP/119-00000000”, “0?cf,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/119-00000000”, “1?skip1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-dial-one,s,8)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:8] GotoIf(“SIP/119-00000000”, “0?nodial”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/119-00000000”, “0?continue”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:10] Set(“SIP/119-00000000”, “EXTHASCW=ENABLED”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/119-00000000”, “0?next1:cwinusebusy”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-dial-one,s,23)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:23] GotoIf(“SIP/119-00000000”, “1?next3:continue”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Goto (macro-dial-one,s,24)
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:24] ExecIf(“SIP/119-00000000”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:25] GotoIf(“SIP/119-00000000”, “0?nodial”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:26] GosubIf(“SIP/119-00000000”, “1?dstring,1:dlocal,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] Set(“SIP/119-00000000”, “DSTRING=”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] Set(“SIP/119-00000000”, “DEVICES=116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/119-00000000”, “0?Return()”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/119-00000000”, “0?Set(DEVICES=16)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:5] Set(“SIP/119-00000000”, “LOOPCNT=1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:6] Set(“SIP/119-00000000”, “ITER=1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:7] Set(“SIP/119-00000000”, “THISDIAL=SIP/116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:8] GosubIf(“SIP/119-00000000”, “1?zap2dahdi,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/119-00000000”, “0?Return()”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] Set(“SIP/119-00000000”, “NEWDIAL=”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:3] Set(“SIP/119-00000000”, “LOOPCNT2=1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:4] Set(“SIP/119-00000000”, “ITER2=1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:5] Set(“SIP/119-00000000”, “THISPART2=SIP/116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:6] ExecIf(“SIP/119-00000000”, “0?Set(THISPART2=DAHDI/116)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:7] Set(“SIP/119-00000000”, “NEWDIAL=SIP/116&”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:8] Set(“SIP/119-00000000”, “ITER2=2”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/119-00000000”, “0?begin2”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:10] Set(“SIP/119-00000000”, “THISDIAL=SIP/116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:11] Return(“SIP/119-00000000”, “”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:9] Set(“SIP/119-00000000”, “DSTRING=SIP/116&”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:10] Set(“SIP/119-00000000”, “ITER=2”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/119-00000000”, “0?begin”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:12] Set(“SIP/119-00000000”, “DSTRING=SIP/116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:13] Return(“SIP/119-00000000”, “”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:27] GotoIf(“SIP/119-00000000”, “0?nodial”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:28] GotoIf(“SIP/119-00000000”, “0?skiptrace”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:29] GosubIf(“SIP/119-00000000”, “1?ctset,1:ctclear,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] Set(“SIP/119-00000000”, “DB(CALLTRACE/116)=119”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:2] Return(“SIP/119-00000000”, “”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:30] Set(“SIP/119-00000000”, “D_OPTIONS=tr”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:31] ExecIf(“SIP/119-00000000”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:32] ExecIf(“SIP/119-00000000”, “0?SIPAddHeader()”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:33] ExecIf(“SIP/119-00000000”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:34] GosubIf(“SIP/119-00000000”, “0?qwait,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:35] Set(“SIP/119-00000000”, “__CWIGNORE=”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:36] Set(“SIP/119-00000000”, “__KEEPCID=TRUE”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:37] GotoIf(“SIP/119-00000000”, “0?usegoto,1”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:38] GotoIf(“SIP/119-00000000”, “0?godial”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:39] Set(“SIP/119-00000000”, “CONNECTEDLINE(name,i)=Dilip Chaturvedi”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:40] Set(“SIP/119-00000000”, “CONNECTEDLINE(num)=116”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:41] Set(“SIP/119-00000000”, “D_OPTIONS=trI”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] pbx.c: – Executing [[email protected]:42] Dial(“SIP/119-00000000”, “SIP/116,trI”) in new stack
[Mar 29 17:13:40] VERBOSE[13980] netsock2.c: == Using SIP RTP TOS bits 184
[Mar 29 17:13:40] VERBOSE[13980] netsock2.c: == Using SIP RTP CoS mark 5
[Mar 29 17:13:40] VERBOSE[13980] app_dial.c: – Called SIP/116
[Mar 29 17:13:40] VERBOSE[13980] app_dial.c: – Connected line update to SIP/119-00000000 prevented.
[Mar 29 17:13:40] VERBOSE[13980] app_dial.c: – SIP/116-00000001 is ringing
[Mar 29 17:13:43] VERBOSE[13980] app_dial.c: – Connected line update to SIP/119-00000000 prevented.
[Mar 29 17:13:43] VERBOSE[13980] app_dial.c: – SIP/116-00000001 answered SIP/119-00000000
[Mar 29 17:13:49] NOTICE[7664] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:13:49] NOTICE[7665] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] Macro(“SIP/119-00000000”, “hangupcall,”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/119-00000000”, “1?endmixmoncheck”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,9)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:9] NoOp(“SIP/119-00000000”, “End of MIXMON check”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:10] GotoIf(“SIP/119-00000000”, “1?nomeetmemon”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,15)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:15] NoOp(“SIP/119-00000000”, “MEETME_RECORDINGFILE=”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:16] GotoIf(“SIP/119-00000000”, “1?noautomon”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,18)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:18] NoOp(“SIP/119-00000000”, “TOUCH_MONITOR_OUTPUT=”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:19] GotoIf(“SIP/119-00000000”, “1?noautomon2”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,25)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:25] NoOp(“SIP/119-00000000”, “MONITOR_FILENAME=”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:26] GotoIf(“SIP/119-00000000”, “1?skiprg”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,29)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:29] GotoIf(“SIP/119-00000000”, “1?skipblkvm”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,32)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:32] GotoIf(“SIP/119-00000000”, “1?theend”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Goto (macro-hangupcall,s,34)
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: – Executing [[email protected]:34] Hangup(“SIP/119-00000000”, “”) in new stack
[Mar 29 17:13:53] VERBOSE[13980] app_macro.c: == Spawn extension (macro-hangupcall, s, 34) exited non-zero on ‘SIP/119-00000000’ in macro ‘hangupcall’
[Mar 29 17:13:53] VERBOSE[13980] features.c: == Spawn extension (macro-dial-one, h, 1) exited non-zero on ‘SIP/119-00000000’
[Mar 29 17:13:53] VERBOSE[13980] app_macro.c: == Spawn extension (macro-dial-one, s, 42) exited non-zero on ‘SIP/119-00000000’ in macro ‘dial-one’
[Mar 29 17:13:53] VERBOSE[13980] app_macro.c: == Spawn extension (macro-exten-vm, s, 7) exited non-zero on ‘SIP/119-00000000’ in macro ‘exten-vm’
[Mar 29 17:13:53] VERBOSE[13980] pbx.c: == Spawn extension (from-internal, 116, 2) exited non-zero on ‘SIP/119-00000000’
[Mar 29 17:15:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:15:01] VERBOSE[14478] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:18:44] NOTICE[7660] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:18:44] NOTICE[7661] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:20:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:20:01] VERBOSE[16439] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:23:39] NOTICE[7656] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:23:39] NOTICE[7657] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:25:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:25:01] VERBOSE[18400] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:28:34] NOTICE[7662] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:28:34] NOTICE[7663] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:30:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:30:01] VERBOSE[20202] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:30:22] VERBOSE[7669] netsock2.c: == Using SIP RTP TOS bits 184
[Mar 29 17:30:22] VERBOSE[7669] netsock2.c: == Using SIP RTP CoS mark 5
[Mar 29 17:33:29] NOTICE[7658] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:33:29] NOTICE[7659] chan_iax2.c: No registration for peer ‘2233450130’ (from 127.0.0.1)
[Mar 29 17:35:01] VERBOSE[7639] asterisk.c: – Remote UNIX connection
[Mar 29 17:35:01] VERBOSE[22014] asterisk.c: – Remote UNIX connection disconnected
[Mar 29 17:36:31] VERBOSE[7669] netsock2.c: == Using SIP RTP TOS bits 184
[Mar 29 17:36:31] VERBOSE[7669] netsock2.c: == Using SIP RTP CoS mark 5
[Mar 29 17:36:31] VERBOSE[22558] pbx.c: – Executing [[email protected]:1] ResetCDR(“SIP/106-00000002”, “”) in new stack
[Mar 29 17:36:31] VERBOSE[22558] pbx.c: – Executing [[email protected]:2] NoCDR(“SIP/106-00000002”, “”) in new stack
[Mar 29 17:36:31] VERBOSE[22558] pbx.c: – Executing [[email protected]:3] Progress(“SIP/106-00000002”, “”) in new stack
[Mar 29 17:36:31] VERBOSE[22558] pbx.c: – Executing [[email protected]:4] Wait(“SIP/106-00000002”, “1”) in new stack
[Mar 29 17:36:33] VERBOSE[22558] pbx.c: – Executing [[email protected]:5] Progress(“SIP/106-00000002”, “”) in new stack
[Mar 29 17:36:33] VERBOSE[22558] pbx.c: – Executing [[email protected]:6] Playback(“SIP/106-00000002”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
[Mar 29 17:36:33] VERBOSE[22558] file.c: – <SIP/106-00000002> Playing ‘silence/1.gsm’ (language ‘en’)
[Mar 29 17:36:34] VERBOSE[22558] file.c: – <SIP/106-00000002> Playing ‘cannot-complete-as-dialed.gsm’ (language ‘en’)
[Mar 29 17:36:36] VERBOSE[22558] file.c: – <SIP/106-00000002> Playing ‘check-number-dial-again.gsm’ (language ‘en’)
[Mar 29 17:36:38] VERBOSE[22558] pbx.c: == Spawn extension (from-internal, 13, 6) exited non-zero on ‘SIP/106-00000002’
[Mar 29 17:36:38] VERBOSE[22558] pbx.c: – Executing [[email protected]:1] Hangup(“SIP/106-00000002”, “”) in new stack
[Mar 29 17:36:38] VERBOSE[22558] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/106-00000002’
[Mar 29 17:36:49] VERBOSE[7669] netsock2.c: == Using SIP RTP TOS bits 184
[Mar 29 17:36:49] VERBOSE[7669] netsock2.c: == Using SIP RTP CoS mark 5
hello,
I am facing the same problem; I can only make calls between internal extension numbers.
The connection to outside was fine until some couple of days ago where i started getting ‘all circuits are busy…’.
Nothing has changed on my configurations.
Please assist me on this
Here is my log file as i call from 1002 to 90712852796
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Macro(“SIP/1002-00000019”, “user-callerid,SKIPTTL,”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Set(“SIP/1002-00000019”, “AMPUSER=1002”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/1002-00000019”, “0?report”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/1002-00000019”, “1?Set(REALCALLERIDNUM=1002)”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] Set(“SIP/1002-00000019”, “AMPUSER=1002”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:5] Set(“SIP/1002-00000019”, “AMPUSERCIDNAME=Diana Mangapi”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/1002-00000019”, “0?report”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:7] Set(“SIP/1002-00000019”, “AMPUSERCID=1002”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:8] Set(“SIP/1002-00000019”, “CALLERID(all)=“Diana Mangapi” <1002>”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:9] ExecIf(“SIP/1002-00000019”, “0?Set(CHANNEL(language)=)”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:10] GotoIf(“SIP/1002-00000019”, “1?continue”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Goto (macro-user-callerid,s,19)
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:19] NoOp(“SIP/1002-00000019”, “Using CallerID “Diana Mangapi” <1002>”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] Macro(“SIP/1002-00000019”, “pinsets,2,1”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1002-00000019”, “1 = 1?cdr,1”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Goto (macro-pinsets,cdr,1)
[Jan 3 14:16:22] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/1002-00000019”, “1?Authenticate(/etc/asterisk/pinset_2,a)”) in new stack
[Jan 3 14:16:22] VERBOSE[30870] file.c: – <SIP/1002-00000019> Playing ‘agent-pass.gsm’ (language ‘en’)
[Jan 3 14:16:23] VERBOSE[30871] manager.c: == Manager ‘admin’ logged on from 127.0.0.1
[Jan 3 14:16:24] VERBOSE[30871] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[Jan 3 14:16:28] VERBOSE[30870] file.c: – <SIP/1002-00000019> Playing ‘auth-thankyou.gsm’ (language ‘en’)
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] ExecIf(“SIP/1002-00000019”, “1?ResetCDR()”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:3] Set(“SIP/1002-00000019”, “_NODEST=”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] Macro(“SIP/1002-00000019”, “record-enable,1002,OUT,”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1002-00000019”, “1?check”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Goto (macro-record-enable,s,4)
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/1002-00000019”, “0?MacroExit()”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/1002-00000019”, “0?Group:OUT”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Goto (macro-record-enable,s,15)
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/1002-00000019”, “0?IN”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/1002-00000019”, “1?MacroExit()”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:5] Macro(“SIP/1002-00000019”, “dialout-trunk,9,0712852796,”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Set(“SIP/1002-00000019”, “DIAL_TRUNK=9”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] GosubIf(“SIP/1002-00000019”, “0?sub-pincheck,s,1”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/1002-00000019”, “0?disabletrunk,1”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] Set(“SIP/1002-00000019”, “DIAL_NUMBER=0712852796”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:5] Set(“SIP/1002-00000019”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:6] Set(“SIP/1002-00000019”, “OUTBOUND_GROUP=OUT_9”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/1002-00000019”, “1?nomax”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Goto (macro-dialout-trunk,s,9)
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/1002-00000019”, “0?skipoutcid”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:10] Set(“SIP/1002-00000019”, “DIAL_TRUNK_OPTIONS=”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:11] Macro(“SIP/1002-00000019”, “outbound-callerid,9”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/1002-00000019”, “0?Set(CALLERPRES()=)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] ExecIf(“SIP/1002-00000019”, “0?Set(REALCALLERIDNUM=1002)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/1002-00000019”, “1?normcid”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Goto (macro-outbound-callerid,s,6)
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:6] Set(“SIP/1002-00000019”, “USEROUTCID=”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:7] Set(“SIP/1002-00000019”, “EMERGENCYCID=”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:8] Set(“SIP/1002-00000019”, “TRUNKOUTCID=123123”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/1002-00000019”, “1?trunkcid”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Goto (macro-outbound-callerid,s,12)
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/1002-00000019”, “1?Set(CALLERID(all)=123123)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/1002-00000019”, “0?Set(CALLERID(all)=)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:14] ExecIf(“SIP/1002-00000019”, “0?Set(CALLERID(all)=)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/1002-00000019”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/1002-00000019”, “1?AGI(fixlocalprefix)”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
[Jan 3 14:16:29] VERBOSE[30870] res_agi.c: – <SIP/1002-00000019>AGI Script fixlocalprefix completed, returning 0
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:13] Set(“SIP/1002-00000019”, “OUTNUM=0712852796”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:14] Set(“SIP/1002-00000019”, “custom=SIP/fxo”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/1002-00000019”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:16] Macro(“SIP/1002-00000019”, “dialout-trunk-predial-hook,”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] MacroExit(“SIP/1002-00000019”, “”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:17] GotoIf(“SIP/1002-00000019”, “0?bypass,1”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:18] GotoIf(“SIP/1002-00000019”, “0?customtrunk”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] pbx.c: – Executing [[email protected]:19] Dial(“SIP/1002-00000019”, “SIP/fxo/0712852796,300,”) in new stack
[Jan 3 14:16:29] VERBOSE[30870] netsock.c: == Using SIP RTP TOS bits 184
[Jan 3 14:16:29] VERBOSE[30870] netsock.c: == Using SIP RTP CoS mark 5
[Jan 3 14:16:29] VERBOSE[30870] app_dial.c: – Called fxo/0712852796
[Jan 3 14:17:01] VERBOSE[30870] app_dial.c: – SIP/fxo-0000001a is circuit-busy
[Jan 3 14:17:01] VERBOSE[30870] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:20] NoOp(“SIP/1002-00000019”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 0”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:21] Goto(“SIP/1002-00000019”, “s-CONGESTION,1”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Set(“SIP/1002-00000019”, “RC=0”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] Goto(“SIP/1002-00000019”, “0,1”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Goto (macro-dialout-trunk,0,1)
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Goto(“SIP/1002-00000019”, “continue,1”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1002-00000019”, “1?noreport”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:3] NoOp(“SIP/1002-00000019”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 0 - failing through to other trunks”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] Set(“SIP/1002-00000019”, “CALLERID(number)=1002”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:6] Macro(“SIP/1002-00000019”, “outisbusy,”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Progress(“SIP/1002-00000019”, “”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/1002-00000019”, “0?emergency,1”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/1002-00000019”, “0?intracompany,1”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] Playback(“SIP/1002-00000019”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[Jan 3 14:17:01] VERBOSE[30870] file.c: – <SIP/1002-00000019> Playing ‘all-circuits-busy-now.gsm’ (language ‘en’)
[Jan 3 14:17:02] VERBOSE[30870] file.c: – <SIP/1002-00000019> Playing ‘pls-try-call-later.gsm’ (language ‘en’)
[Jan 3 14:17:03] VERBOSE[30915] manager.c: == Manager ‘admin’ logged on from 127.0.0.1
[Jan 3 14:17:04] VERBOSE[30915] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[Jan 3 14:17:05] VERBOSE[30870] pbx.c: – Executing [[email protected]:5] Congestion(“SIP/1002-00000019”, “20”) in new stack
[Jan 3 14:17:11] VERBOSE[30923] manager.c: == Manager ‘admin’ logged on from 127.0.0.1
[Jan 3 14:17:12] VERBOSE[30923] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[Jan 3 14:17:19] VERBOSE[30931] manager.c: == Manager ‘admin’ logged on from 127.0.0.1
[Jan 3 14:17:19] VERBOSE[30931] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[Jan 3 14:17:19] VERBOSE[30934] manager.c: == Manager ‘admin’ logged on from 127.0.0.1
[Jan 3 14:17:20] VERBOSE[30934] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[Jan 3 14:17:25] VERBOSE[30870] app_macro.c: == Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘SIP/1002-00000019’ in macro ‘outisbusy’
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: == Spawn extension (from-internal, 90712852796, 6) exited non-zero on ‘SIP/1002-00000019’
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] Macro(“SIP/1002-00000019”, “hangupcall”) in new stack
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1002-00000019”, “1?skiprg”) in new stack
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Goto (macro-hangupcall,s,4)
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Executing [[email protected]:4] GotoIf(“SIP/1002-00000019”, “1?skipblkvm”) in new stack
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Goto (macro-hangupcall,s,7)
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/1002-00000019”, “1?theend”) in new stack
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Goto (macro-hangupcall,s,9)
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: – Executing [[email protected]:9] Hangup(“SIP/1002-00000019”, “”) in new stack
[Jan 3 14:17:25] VERBOSE[30870] app_macro.c: == Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/1002-00000019’ in macro ‘hangupcall’
[Jan 3 14:17:25] VERBOSE[30870] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/1002-00000019’
Thank you
Whatever SIP peer you have named fxo refused your call:
[Jan 3 14:16:29] VERBOSE[30870] app_dial.c: – Called fxo/0712852796
[Jan 3 14:17:01] VERBOSE[30870] app_dial.c: – SIP/fxo-0000001a is circuit-busy
[Jan 3 14:17:01] VERBOSE[30870] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
Do you read these logs when you post them?
I have not changed anything in any of my configurations. What could be the possible cause(s) for it to refuse my calls?
No idea, don’t even know what “it” is. Some kind of gateway? Does it have a log? Have you tried to reboot it?
All of this just a guess because the name is fxo, for foreign exchange office. Fancy word for a POTS line.
I would like to know the outcome.
Thank for your replies.
That fxo is my SIP trunk. I have rebooted with no lucky
SIP trunk to where? Need complete info.
SIP Trunk from internal network to Service Provider’s Network, for telephony services.
This is from log file
[Jan 6 04:54:41] VERBOSE[12188] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[Jan 6 04:54:41] VERBOSE[12188] pbx.c: – Executing [[email protected]:3] NoOp(“SIP/1002-00000035”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 0 - failing through to other trunks”) in new stack
No matter how many times you post it the answer is the same, your trunk is indicating it can’t complete the call.
It’s one of these things -
1 - Your network has changed and your server can’t reach your provider
2 - Your provider is refusing your calls
You can try turning off the dialplan debug ‘core set verbose 0’ and ‘core set debug 0’ and turn on sip debug ‘sip set debug peer fxo’
Can you ping the host specified in the peer?
I can not ping the host in the peer
Ok, well either your provider does not accept pings (possible) or you have a networking issue with your server (can you ping any host on Internet? Is DNS working) or your provider has issues. If it was working and you have changed nothing on your network I would at least contact them.
DNS is working just fine and everything is pingable!
I will contact my service provider.
Thank you so much for your support