Elastix Outbound Caller ID

[prozint (Anton Fartukov)]

Hi all.

i have such trouble.

i want to call some numbers and have their self numbers in their phones.

i need something like set outbound CLI = Dilaled number.

please advise,

[cynjut (Dave Burgess)]

You’re not going to get a lot of help since Elastix is no longer supported and is end of life. You’re probably going to need to upgrade to a new version of FreePBX before you can get this working.

[lgaetz (Lorne Gaetz)]

https://wiki.freepbx.org/display/PPS/Elastix+and+PBXinaFlash+to+FreePBX+Distro+Conversion+Tool

[prozint (Anton Fartukov)]

ok thx , how to configure on free pbx ?

[cynjut (Dave Burgess)]

Outbound call shows own number on outbound phone instead of dialed number

Hello, I’ve discovered that on outbound calls from my FreePBX System, it shows the own number with “CID:” prefixed. in extensions_additional.conf, I’ve found this: [macro-dialout-trunk] … exten => s,n,ExecIf($["${DB(AMPUSER/${AMPUSER}/cidname)}" != “”]?Set(CONNECTEDLINE(num,i)=${DIAL_NUMBER})) exten => s,n,ExecIf($["${DB(AMPUSER/${AMPUSER}/cidname)}" != “”]?Set(CONNECTEDLINE(name,i)=CID:${CALLERID(number)})) … If I comment out both lines, I have the wanted behaviour - on outbound calls i…

[prozint (Anton Fartukov)]

i have only this -

[macro-dialout-trunk]
include => macro-dialout-trunk-custom
exten => s,1,Set(DIAL_TRUNK=${ARG1})
exten => s,n,GosubIf($[$["${ARG3}" != “”] & $["${DB(AMPUSER/${AMPUSER}/pinless)}" != “NOPASSWD”]]?sub-pincheck,s,1)
exten => s,n,GotoIf($[“x${OUTDISABLE_${DIAL_TRUNK}}” = “xon”]?disabletrunk,1)
exten => s,n,Set(DIAL_NUMBER=${ARG2})
exten => s,n,Set(DIAL_TRUNK_OPTIONS=${DIAL_OPTIONS})
exten => s,n,Set(OUTBOUND_GROUP=OUT_${DIAL_TRUNK})
exten => s,n,GotoIf($["${OUTMAXCHANS_${DIAL_TRUNK}}foo" = “foo”]?nomax)
exten => s,n,GotoIf($[ ${GROUP_COUNT(OUT_${DIAL_TRUNK})} >= ${OUTMAXCHANS_${DIAL_TRUNK}} ]?chanfull)
exten => s,n(nomax),GotoIf($["${INTRACOMPANYROUTE}" = “YES”]?skipoutcid)
exten => s,n,Set(DIAL_TRUNK_OPTIONS=${TRUNK_OPTIONS})
exten => s,n,Macro(outbound-callerid,${DIAL_TRUNK})
exten => s,n(skipoutcid),GosubIf($["${PREFIX_TRUNK_${DIAL_TRUNK}}" != “”]?sub-flp-${DIAL_TRUNK},s,1)
exten => s,n,Set(OUTNUM=${OUTPREFIX_${DIAL_TRUNK}}${DIAL_NUMBER})
exten => s,n,Set(custom=${CUT(OUT_${DIAL_TRUNK},:,1)})
exten => s,n,ExecIf($[$["${MOHCLASS}" != “default”] & $["${MOHCLASS}" != “”]]?Set(DIAL_TRUNK_OPTIONS=M(setmusic^${MOHCLASS})${DIAL_TRUNK_OPTIONS}))
exten => s,n(gocall),Macro(dialout-trunk-predial-hook,)
exten => s,n,GotoIf($["${PREDIAL_HOOK_RET}" = “BYPASS”]?bypass,1)
exten => s,n,GotoIf($["${custom}" = “AMP”]?customtrunk)
exten => s,n,Dial(${OUT_${DIAL_TRUNK}}/${OUTNUM},300,${DIAL_TRUNK_OPTIONS})
exten => s,n,Noop(Dial failed for some reason with DIALSTATUS = ${DIALSTATUS} and HANGUPCAUSE = ${HANGUPCAUSE})
exten => s,n,Goto(s-${DIALSTATUS},1)
exten => s,n(customtrunk),Set(pre_num=${CUT(OUT_${DIAL_TRUNK},$,1)})
exten => s,n,Set(the_num=${CUT(OUT_${DIAL_TRUNK},$,2)})
exten => s,n,Set(post_num=${CUT(OUT_${DIAL_TRUNK},$,3)})
exten => s,n,GotoIf($["${the_num}" = “OUTNUM”]?outnum:skipoutnum)
exten => s,n(outnum),Set(the_num=${OUTNUM})
exten => s,n(skipoutnum),Dial(${pre_num:4}${the_num}${post_num},300,${DIAL_TRUNK_OPTIONS})
exten => s,n,Noop(Dial failed for some reason with DIALSTATUS = ${DIALSTATUS} and HANGUPCAUSE = ${HANGUPCAUSE})
exten => s,n,Goto(s-${DIALSTATUS},1)
exten => s,n(chanfull),Noop(max channels used up)
exten => s-BUSY,1,Noop(Dial failed due to trunk reporting BUSY - giving up)
exten => s-BUSY,n,Playtones(busy)
exten => s-BUSY,n,Busy(20)
exten => s-ANSWER,1,Noop(Call successfully answered - Hanging up now)
exten => s-ANSWER,n,Macro(hangupcall,)
exten => s-NOANSWER,1,Noop(Dial failed due to trunk reporting NOANSWER - giving up)
exten => s-NOANSWER,n,Progress
exten => s-NOANSWER,n,Playback(number-not-answering,noanswer)

[Stewart1 (Stewart)]

If you need to do this for just a few numbers, e.g. you want to call your mobile with CLI = your mobile number (so you can retrieve voicemail), set up an Outbound Route with Route CID = your mobile number, Override Extension checked, some Prefix to identify this special call, Match Pattern = your mobile number and a suitable trunk. You’ll need one such route for each number to be spoofed in this way.

If you want this to work for any number, you could create a custom trunk that copies the dialed number into the caller ID, then executes the regular trunk code.