FreePBX | Register | Issues | Wiki | Portal | Support

YeaLink T23g No Audio when paging

freepbx
Tags: #<Tag:0x00007fb904c197a0>

(Robert Stolorz) #1

I’m using the new Yealink T23g phones with the free "Endpoint Manager"
To get them working I used the T22 templates.

You can dial the paging extension and everything works and appears like it should be working but there is no audio at all going through either way.

Versions:
CentOS release 6.3 (Final)
Core 2.11.0.35
Endpoint Manager 2.11.13 (tried downloading an updated version)


(Robert Stolorz) #2

Here’s some additional info. I just enabled the *80nnn direct paging and that works.

For paging groups the system dials then immediatly hangs up.

Log:

[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@from-internal:1] Goto(“SIP/500-000001bb”, “app-pagegroups,302,1”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@from-internal:1] Goto(“SIP/500-000001bb”, “app-pagegroups,302,1”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Goto (app-pagegroups,302,1)
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Goto (app-pagegroups,302,1)
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:1] Macro(“SIP/500-000001bb”, “user-callerid,”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:1] Macro(“SIP/500-000001bb”, “user-callerid,”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/500-000001bb”, “TOUCH_MONITOR=1512596267.837”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/500-000001bb”, “TOUCH_MONITOR=1512596267.837”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/500-000001bb”, “AMPUSER=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/500-000001bb”, “AMPUSER=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/500-000001bb”, “0?report”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/500-000001bb”, “0?report”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/500-000001bb”, “1?Set(REALCALLERIDNUM=500)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/500-000001bb”, “1?Set(REALCALLERIDNUM=500)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/500-000001bb”, “AMPUSER=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/500-000001bb”, “AMPUSER=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/500-000001bb”, “0?limit”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/500-000001bb”, “0?limit”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/500-000001bb”, “AMPUSERCIDNAME=FeraTechInc”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/500-000001bb”, “AMPUSERCIDNAME=FeraTechInc”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/500-000001bb”, “0?report”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/500-000001bb”, “0?report”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/500-000001bb”, “AMPUSERCID=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/500-000001bb”, “AMPUSERCID=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/500-000001bb”, “__DIAL_OPTIONS=tr”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/500-000001bb”, “__DIAL_OPTIONS=tr”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/500-000001bb”, “CALLERID(all)=“FeraTechInc” <500>”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/500-000001bb”, “CALLERID(all)=“FeraTechInc” <500>”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/500-000001bb”, “0?limit”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/500-000001bb”, “0?limit”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/500-000001bb”, “0?Set(GROUP(concurrency_limit)=500)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/500-000001bb”, “0?Set(GROUP(concurrency_limit)=500)”) in new stack
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/500-000001bb”, “0?Set(CHANNEL(language)=)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/500-000001bb”, “0?Set(CHANNEL(language)=)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/500-000001bb”, “7?sub-ccss,s,1(app-pagegroups,302)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/500-000001bb”, “7?sub-ccss,s,1(app-pagegroups,302)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/500-000001bb”, “0?Return()”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/500-000001bb”, “0?Return()”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/500-000001bb”, “CCSS_SETUP=TRUE”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/500-000001bb”, “CCSS_SETUP=TRUE”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/500-000001bb”, “0?monitor_config,1(app-pagegroups,302):monitor_default,1(app-pagegroups,302)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/500-000001bb”, “0?monitor_config,1(app-pagegroups,302):monitor_default,1(app-pagegroups,302)”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/500-000001bb”, “0?is_exten”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/500-000001bb”, “0?is_exten”) in new stack
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/500-000001bb”, “”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/500-000001bb”, “”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/500-000001bb”, “FALSE”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/500-000001bb”, “FALSE”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/500-000001bb”, “0?continue”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/500-000001bb”, “0?continue”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:17] Set(“SIP/500-000001bb”, “__TTL=64”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:17] Set(“SIP/500-000001bb”, “__TTL=64”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:18] GotoIf(“SIP/500-000001bb”, “1?continue”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:18] GotoIf(“SIP/500-000001bb”, “1?continue”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Goto (macro-user-callerid,s,29)
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Goto (macro-user-callerid,s,29)
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:29] Set(“SIP/500-000001bb”, “CALLERID(number)=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:29] Set(“SIP/500-000001bb”, “CALLERID(number)=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/500-000001bb”, “CALLERID(name)=FeraTechInc”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/500-000001bb”, “CALLERID(name)=FeraTechInc”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/500-000001bb”, “CDR(cnum)=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/500-000001bb”, “CDR(cnum)=500”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/500-000001bb”, “CDR(cnam)=FeraTechInc”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/500-000001bb”, “CDR(cnam)=FeraTechInc”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/500-000001bb”, “CHANNEL(language)=en”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/500-000001bb”, “CHANNEL(language)=en”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:2] Set(“SIP/500-000001bb”, “_PAGEGROUP=302”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:2] Set(“SIP/500-000001bb”, “_PAGEGROUP=302”) in new stack
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] NOTICE[1684] chan_sip.c: Registration from ‘“301” sip:301@74.122.193.124’ failed for ‘46.29.162.16:5833’ - No matching peer found
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:3] GotoIf(“SIP/500-000001bb”, “1?:busy”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:3] GotoIf(“SIP/500-000001bb”, “1?:busy”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:4] Set(“SIP/500-000001bb”, “DEVICE_STATE(Custom:PAGE302)=INUSE”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:4] Set(“SIP/500-000001bb”, “DEVICE_STATE(Custom:PAGE302)=INUSE”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:5] Answer(“SIP/500-000001bb”, “”) in new stack
[2017-12-06 16:37:47] VERBOSE[15944] pbx.c: – Executing [302@app-pagegroups:5] Answer(“SIP/500-000001bb”, “”) in new stack


(Tony Lewis) #3

You won’t find much help on a 4 year old version of FreePBX which is what 2.11 is.


(Dave Burgess) #4

There’s no 301 peer in your configuration.

Other than that, I don’t see anything that looks like an error.


(Robert Stolorz) #5

I did some research. It’s actually because of this:

The DHADI module isn’t loaded and it’s required by meetme.

WARNING app_meetme.c Unable to open DAHDI pseudo device

Anybody know the most recent version of FreePBX that I could restore my backup into? I really don’t feel like manually adding 30+ phones and configuration again.


(Lorne Gaetz) #6

You don’t want to be using app_meetme. In Advanced Settings, set the Conference Room App to app_confbridge.


(Robert Stolorz) #7

Dude… I love you. This fixed it. Now I’m able to page normally and everything seems to be working.

I know it’s an old system but it’s a small school they don’t have the money to really upgrade…