What is the Basefile Equivalent to "Voice/Text Mail Power Light Flash"

Endpoint Manager - What is the equivalent setting to turn on the Red flashing light on the T42G’s - You can enable this feature through the web interface, but Basefile Edit is supposed to do this for every phone - I have tried to find the XML setting for this but I can’t.

Do you all know what the xml setting would be for the web option “Voice/Text Mail Power Light Flash”?

Thanks!

Best bet is to contact yealink or look at their documentation for the XML setting.

If it’s not already there you will have to add the base file entry

Paramater = phone_setting.mail_power_led_flash_enable
Value =1

phone_setting.mail_power_led_flash_enable 0 or 1
Description:
Enables or disables the power indicator LED to flash when the IP phone receives a
voice mail or a text message.
For SIP VP-T49G/SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21§ E2 IP
phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slow flashes (1000ms) red)
For SIP-T19§ E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slow flashes (1000ms) yellow)

Thanks! That is the setting I was looking for.

Greg