FreePBX | Register | Issues | Wiki | Portal | Support

Vega 50 Routing FXO to FXS and vice-a-versa not working


(Tgross) #1

I have a Vega 50 0402 that I need to do a pass through for a fax machine but also use the POTS line for survivability for the ENP.

I have the ENP functionality working but the routing from FXO to FXS and vice-a-versa isn’t working.

Any help would be appreciated.

Here’s my dial plan (I know Profile 20 is redundant but I’ve been trying everything):

Plan Summary

Interfaces:

Interface Name Port Group Channels Type


0204 POTS 4 1 1 POTS
0201 POTS 5 1 1 POTS
9901 SIP 2 1 – LAN

CPG Interfaces:

Interface Name Destinations


0600 FXO 0201
1996 Emergency_FXO_Ports 0201

Profile 2: To_FXS (enabled)

Index Grp Source Destination Status
/Cost Int’face Address Int’face Address


1/0 0 0201 TEL:<(.*)> 0204 TEL:<1> Valid

Profile 20: To_SIP (enabled)

Index Grp Source Destination Status
/Cost Int’face Address Int’face Address


1/0 0 0201 TEL:<(.)> 0204 TEL:<1> Valid
4/0 0 0204 TEL:<(.
)> 0201 TEL:<1> Valid

Profile 23: To_FXO (enabled)

Index Grp Source Destination Status
/Cost Int’face Address Int’face Address


1/0 99 99… TEL:<(.)> 0600 TEL:<1> Valid
2/0 0 0201 TEL:<(.
)> 0204 TEL:<1> Valid

Profile 25: Emergency_Call_Handling (enabled)

Index Grp Source Destination Status
/Cost Int’face Address Int’face Address


1/1 0 0[2]… TEL:<(911)> 9901 TA:127.0.0.1,TEL:<1> Valid
2/2 100 9901 TEL:<(911)> 1996 TEL:<1> Valid

Post Profile (disabled)

Index Grp Source Destination
/Cost Int’face Address Int’face Address


1/- — .* TEL:00<.*> TYPE:international

Call Presentation Group 1 (enabled)

Index Grp Source Destination
Int’face Address Int’face Address


1 — 0600 0201

Call Presentation Group 2 (enabled)

Index Grp Source Destination
Int’face Address Int’face Address


1 — 1996 0201

When I call into the FXO port from outside this is what I see in the log:

LOG: 09/21/2018 11:33:43.705 POTS (I)R01Ca8 incoming
call ref=[f10000d3] srce= [0]

LOG: 09/21/2018 11:33:46.702 POTS (I)R05Ca8 disconnect call cause 2
call ref=[f10000d3]