FreePBX | Register | Issues | Wiki | Portal | Support

Upgrading 10.13.66-22 to SNG7 - Wont boot


(Slashroot) #1

Hi,

I’m trying to upgrade the FreePBX distro to SNG7 by following the official guide(https://wiki.freepbx.org/display/PPS/Upgrading+from+FreePBX+10.13.66+to+SNG7).

Installing:
yum -y install http://package1.sangoma.net/distro-upgrade-1804-1.sng7.noarch.rpm

Then “distro-upgrade” says everything is fine and takes the server down for the first reboot.

The following is added to grub.conf(automatically):
default=0
timeout=5
hiddenmenu
title System Upgrade (redhat-upgrade-tool)
root (hd0,0)
kernel /boot/vmlinuz-redhat-upgrade-tool ro root=/dev/xvda1 console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us crashkernel=auto SYSFONT=latarcyrheb-sun16 upgrade init=/usr/libexec/upgrade-init selinux=0 rd.plymouth=0 plymouth.enable=0 net.ifnames=0 consoleblank=0
initrd /boot/initramfs-redhat-upgrade-tool.img
title SHMZ (2.6.32-642.6.2.el6.x86_64)
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-642.6.2.el6.x86_64 ro root=/dev/xvda1 console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us crashkernel=auto SYSFONT=latarcyrheb-sun16
initrd /boot/initramfs-2.6.32-642.6.2.el6.x86_64.img
title CentOS 6.5 bashton1
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-431.el6.x86_64 ro root=LABEL=/ console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us
initrd /boot/initramfs-2.6.32-431.el6.x86_64.img


(Slashroot) #2

Console log, part1:

er (EHCI) Driver
ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
XENBUS: Device with no driver: device/vbd/768
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
rtc_cmos 00:05: setting system clock to 2018-07-11 12:33:47 UTC (1531312427)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 664k freed
Freeing unused kernel memory: 1556k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_MD: removing MD RAID activation
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
xlblk_init: register_blkdev major: 202
blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: enabled;
xvda: xvda1
Refined TSC clocksource calibration: 2299.995 MHz.
e%Ginput: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/xvda1
SELinux: Disabled at runtime.
type=1404 audit(1531312428.314:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
Welcome to SHMZ

Starting udev: udevd[333]: GOTO ‘pulseaudio_check_usb’ has no matching label in: ‘/lib/udev/rules.d/90-pulseaudio.rules’

udevd[333]: GOTO ‘pulseaudio_check_usb’ has no matching label in: ‘/lib/udev/rules.d/90-pulseaudio.rules’

udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Initialising Xen virtual ethernet driver.
e%G[ OK ]

Setting hostname localhost.localdomain: [ OK ]

Setting up Logical Volume Management: No volume groups found

[ OK ]

Checking filesystems

Checking all file systems.

[/sbin/fsck.ext4 (1) – /] fsck.ext4 -a /dev/xvda1

/: clean, 252286/3932160 files, 4376242/15727627 blocks

[ OK ]

Remounting root filesystem in read-write mode: [ OK ]

Mounting local filesystems: [ OK ]

Enabling /etc/fstab swaps: Adding 3999996k swap on /swapfile. Priority:-1 extents:5 across:4352252k SS
[ OK ]

Entering non-interactive startup

Calling the system activity data collector (sadc)…

NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
ipset: Loading IP sets: [ OK ]

ERROR: Wanpipe configuration file not found:

       /etc/wanpipe/wanpipe1.conf

iptables: Applying firewall rules: ip_tables: © 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ OK ]

Bringing up loopback interface: [ OK ]

Bringing up interface eth0:

Determining IP information for eth0… done.

RTNETLINK answers: Network is unreachable

[ OK ]

Starting auditd: type=1305 audit(1531312435.752:3): audit_pid=1468 old=0 auid=4294967295 ses=4294967295 res=1
[ OK ]

Starting portreserve: [ OK ]

Starting system logger: [ OK ]

Starting rpcbind: [ OK ]

Starting system message bus: [ OK ]

Setting network parameters… [ OK ]

Starting NetworkManager daemon: [ OK ]

Starting Avahi daemon… [ OK ]

Loading DAHDI hardware modules:

dahdi: Version: 2.11.1
dahdi: Telephony Interface Registered on major 196
wct4xxp: Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.0.0.251 LEN=271 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=251
802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com
All bugs added by David S. Miller davem@redhat.com
[ OK ]

wcte43x: [ OK ]

wcte12xp: [ OK ]

wcte13xp: [ OK ]

wct1xxp: [ OK ]

wcte11xp: Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.0.0.251 LEN=271 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=251
[ OK ]

r1t1: [ OK ]

rxt1: [ OK ]

wctdm24xxp: [ OK ]

wcaxx: [ OK ]

wcfxo: [ OK ]

wctdm: Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.0.0.251 LEN=271 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=251
[ OK ]

rcbfx: [ OK ]

wcb4xxp: [ OK ]

wctc4xxp: dahdi_transcode: Loaded.
[ OK ]

xpp_usb: Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.0.0.251 LEN=253 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=233
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new interface driver xpp_usb
[ OK ]

Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.0.0.251 LEN=217 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=197
Running dahdi_cfg: [ OK ]

Starting NFS statd: [ OK ]

Starting cups: [ OK ]

Starting acpi daemon: [ OK ]

Starting HAL daemon: [ OK ]

Retrigger failed udev events[ OK ]

Starting Queue callback daemon: [ OK ]

Starting dnsmasq: [ OK ]

Starting sshd: [ OK ]

Starting xinetd: [ OK ]

Starting ntpd: [ OK ]

Starting UPS monitoring:[ OK ]

YPHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

Exception: SQLSTATE[HY000] [2002] Can’t connect to local MySQL server through socket ‘/var/lib/mysql/mysql.sock’ (2)::SQLSTATE[HY000] [2002] Can’t connect to local MySQL server through socket ‘/var/lib/mysql/mysql.sock’ (2) in file /var/www/html/admin/libraries/utility.functions.php on line 204

Stack trace:

Exception->() /var/www/html/admin/libraries/utility.functions.php:204

die_freepbx() /var/www/html/admin/libraries/BMO/Database.class.php:131

PDOException->() /var/www/html/admin/libraries/BMO/Database.class.php:128

PDO->__construct() /var/www/html/admin/libraries/BMO/Database.class.php:128

FreePBX\Database->__construct() /var/www/html/admin/libraries/BMO/FreePBX.class.php:72

FreePBX->__construct() /var/www/html/admin/bootstrap.php:141

require_once() /etc/freepbx.conf:12

include() /var/www/html/admin/modules/vqplus/queue-callback.php:10

YStarting mysqld: [ OK ]

Starting elasticsearch: [ OK ]

Starting newrelic-sysmond: Y[ OK ]

Starting postfix: process `newrelic-infra’ is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
[ OK ]

Starting jboss…

YStarting httpd: Warning: DocumentRoot [/var/www/html/aastra/] does not exist

[ OK ]

Starting asterisk: [ OK ]

Starting crond: [ OK ]

Ensuring logfiles are presentStarting fail2ban: WARNING ‘action’ not defined in ‘lighttpd-fastcgi’. Using default one: ‘’

WARNING ‘action’ not defined in ‘php-url-fopen’. Using default one: ‘’

WARNING ‘action’ not defined in ‘lighttpd-auth’. Using default one: ‘’

YBluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Y[ OK ]

Starting atd: [ OK ]

Starting Filesystem event daemon (incrond): [ OK ]

Please wait…

PHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

PHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

[38;5;148m!!!amportal is depreciated. Please use fwconsole!!!e[39m

forwarding all commands to ‘fwconsole’

PHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

[32mAsterisk already runninge[39m

Running FreePBX startup…

[32mTaking too long? Customize the chown command, See http://wiki.freepbx.org/display/FOP/FreePBX+Chown+Confe[39m

Setting Permissions…

Setting base permissions…Done

Setting specific permissions…

0 [>---------------------------]
[2K 100 [---------------->-----------]
e[2K 200 [---->-----------------------]
e[2K 300 [-------------------->-------]
e[2K 400 [-------->-------------------]
e[2K 500 [------------------------>—]
e[2K 600 [------------>---------------]
e[2K 700 [>---------------------------]
e[2K 800 [---------------->-----------]
e[2K 900 [---->-----------------------]
e[2K 1000 [-------------------->-------]
e[2K 1100 [-------->-------------------]
e[2K 1200 [------------------------>—]
e[2K 1300 [------------>---------------]
e[2K 1400 [>---------------------------]
e[2K 1500 [---------------->-----------]
e[2K 1600 [---->-----------------------]
e[2K 1700 [-------------------->-------]
e[2K 1800 [-------->-------------------]
e[2K 1900 [------------------------>—]
e[2K 2000 [------------>---------------]
e[2K 2100 [>---------------------------]
e[2K 2200 [---------------->-----------]
e[2K 2300 [---->-----------------------]
e[2K 2400 [-------------------->-------]
e[2K 2500 [-------->-------------------]
e[2K 2600 [------------------------>—]
e[2K 2700 [------------>---------------]
e[2K 2800 [>---------------------------]
e[2K 2900 [---------------->-----------]
e[2K 3000 [---->-----------------------]
e[2K 3100 [-------------------->-------]
e[2K 3200 [-------->-------------------]
e[2K 3300 [------------------------>—]
e[2K 3400 [------------>---------------]
e[2K 3500 [>---------------------------]
e[2K 3600 [---------------->-----------]
e[2K 3700 [---->-----------------------]
e[2K 3800 [-------------------->-------]
e[2K 3900 [-------->-------------------]
e[2K 4000 [------------------------>—]
e[2K 4100 [------------>---------------]
e[2K 4200 [>---------------------------]
e[2K 4300 [---------------->-----------]
e[2K 4400 [---->-----------------------]
e[2K 4500 [-------------------->-------]
e[2K 4600 [-------->-------------------]
e[2K 4700 [------------------------>—]
e[2K 4800 [------------>---------------]
e[2K 4900 [>---------------------------]
e[2K 5000 [---------------->-----------]
e[2K 5100 [---->-----------------------]
e[2K 5200 [-------------------->-------]
e[2K 5300 [-------->-------------------]
e[2K 5400 [------------------------>—]
e[2K 5500 [------------>---------------]
e[2K 5600 [>---------------------------]
e[2K 5700 [---------------->-----------]
e[2K 5800 [---->-----------------------]
e[2K 5900 [-------------------->-------]
e[2K 6000 [-------->-------------------]
e[2K 6100 [------------------------>—]
e[2K 6200 [------------>---------------]
e[2K 6300 [>---------------------------]
e[2K 6400 [---------------->-----------]
e[2K 6500 [---->-----------------------]
e[2K 6600 [-------------------->-------]
e[2K 6700 [-------->-------------------]
e[2K 6800 [------------------------>—]
e[2K 6900 [------------>---------------]
e[2K 7000 [>---------------------------]
e[2K 7100 [---------------->-----------]
e[2K 7200 [---->-----------------------]
e[2K 7300 [-------------------->-------]
e[2K 7400 [-------->-------------------]
e[2K 7500 [------------------------>—]
e[2K 7600 [------------>---------------]
e[2K 7700 [>---------------------------]
e[2K 7800 [---------------->-----------]
e[2K 7900 [---->-----------------------]
e[2K 8000 [-------------------->-------]
e[2K 8100 [-------->-------------------]
e[2K 8200 [------------------------>—]
e[2K 8300 [------------>---------------]
e[2K 8400 [>---------------------------]
e[2K 8500 [---------------->-----------]
e[2K 8600 [---->-----------------------]
e[2K 8700 [-------------------->-------]
e[2K 8800 [-------->-------------------]
e[2K 8900 [------------------------>—]
e[2K 9000 [------------>---------------]
e[2K 9100 [>---------------------------]
e[2K 9200 [---------------->-----------]
e[2K 9300 [---->-----------------------]
e[2K 9400 [-------------------->-------]
e[2K 9500 [-------->-------------------]
e[2K 9600 [------------------------>—]
e[2K 9700 [------------>---------------]
e[2K 9800 [>---------------------------]
e[2K 9900 [---------------->-----------]
e[2K 10000 [---->-----------------------]
e[2K 10100 [-------------------->-------]
e[2K 10200 [-------->-------------------]
e[2K 10300 [------------------------>—]
e[2K 10400 [------------>---------------]
e[2K 10500 [>---------------------------]
e[2K 10600 [---------------->-----------]
e[2K 10700 [---->-----------------------]
e[2K 10800 [-------------------->-------]
e[2K 10900 [-------->-------------------]
e[2K 11000 [------------------------>—]
e[2K 11100 [------------>---------------]
e[2K 11200 [>---------------------------]
e[2K 11300 [---------------->-----------]
e[2K 11400 [---->-----------------------]
e[2K 11500 [-------------------->-------]
e[2K 11600 [-------->-------------------]
e[2K 11700 [------------------------>—]
e[2K 11800 [------------>---------------]
e[2K 11900 [>---------------------------]
e[2K 12000 [---------------->-----------]
e[2K 12100 [---->-----------------------]
e[2K 12200 [-------------------->-------]
e[2K 12300 [-------->-------------------]
e[2K 12400 [------------------------>—]
e[2K 12500 [------------>---------------]
e[2K 12600 [>---------------------------]
e[2K 12700 [---------------->-----------]
e[2K 12800 [---->-----------------------]
e[2K 12900 [-------------------->-------]
e[2K 13000 [-------->-------------------]
e[2K 13100 [------------------------>—]
e[2K 13200 [------------>---------------]
e[2K 13300 [>---------------------------]
e[2K 13400 [---------------->-----------]
e[2K 13500 [---->-----------------------]
e[2K 13600 [-------------------->-------]
e[2K 13700 [-------->-------------------]
e[2K 13800 [------------------------>—]
e[2K 13900 [------------>---------------]
e[2K 14000 [>---------------------------]
e[2K 14100 [---------------->-----------]
e[2K 14200 [---->-----------------------]
e[2K 14300 [-------------------->-------]
e[2K 14400 [-------->-------------------]
e[2K 14500 [------------------------>—]
e[2K 14600 [------------>---------------]
e[2K 14700 [>---------------------------]
e[2K 14800 [---------------->-----------]
e[2K 14900 [---->-----------------------]
e[2K 15000 [-------------------->-------]
e[2K 15100 [-------->-------------------]
e[2K 15200 [------------------------>—]
e[2K 15300 [------------>---------------]
e[2K 15400 [>---------------------------]
e[2K 15500 [---------------->-----------]
e[2K 15600 [---->-----------------------]
e[2K 15700 [-------------------->-------]
e[2K 15800 [-------->-------------------]
e[2K 15900 [------------------------>—]
e[2K 16000 [------------>---------------]
e[2K 16100 [>---------------------------]
e[2K 16200 [---------------->-----------]
e[2K 16300 [---->-----------------------]
e[2K 16400 [-------------------->-------]
e[2K 16500 [-------->-------------------]
e[2K 16600 [------------------------>—]
e[2K 16700 [------------>---------------]
e[2K 16800 [>---------------------------]
e[2K 16900 [---------------->-----------]
e[2K 17000 [---->-----------------------]
e[2K 17100 [-------------------->-------]
e[2K 17200 [-------->-------------------]
e[2K 17300 [------------------------>—]
e[2K 17400 [------------>---------------]
e[2K 17500 [>---------------------------]
e[2K 17600 [---------------->-----------]
e[2K 17700 [---->-----------------------]
e[2K 17800 [-------------------->-------]
e[2K 17900 [-------->-------------------]
e[2K 18000 [------------------------>—]
e[2K 18100 [------------>---------------]
e[2K 18200 [>---------------------------]
e[2K 18300 [---------------->-----------]
e[2K 18400 [---->-----------------------]
e[2K 18500 [-------------------->-------]
e[2K 18600 [-------->-------------------]
e[2K 18700 [------------------------>—]
e[2K 18800 [------------>---------------]
e[2K 18900 [>---------------------------]
e[2K 19000 [---------------->-----------]
e[2K 19100 [---->-----------------------]
e[2K 19200 [-------------------->-------]
e[2K 19300 [-------->-------------------]
e[2K 19400 [------------------------>—]
e[2K 19500 [------------>---------------]
e[2K 19600 [>---------------------------]
e[2K 19700 [---------------->-----------]
e[2K 19800 [---->-----------------------]
e[2K 19900 [-------------------->-------]
e[2K 20000 [-------->-------------------]
e[2K 20100 [------------------------>—]
e[2K 20200 [------------>---------------]
e[2K 20300 [>---------------------------]
e[2K 20400 [---------------->-----------]
e[2K 20500 [---->-----------------------]
e[2K 20600 [-------------------->-------]
e[2K 20700 [-------->-------------------]
e[2K 20800 [------------------------>—]
e[2K 20900 [------------>---------------]
e[2K 21000 [>---------------------------]
e[2K 21100 [---------------->-----------]
e[2K 21200 [---->-----------------------]
e[2K 21300 [-------------------->-------]
e[2K 21400 [-------->-------------------]
e[2K 21500 [------------------------>—]
e[2K 21600 [------------>---------------]
e[2K 21700 [>---------------------------]
e[2K 21800 [---------------->-----------]
e[2K 21900 [---->-----------------------]
e[2K 22000 [-------------------->-------]
e[2K 22100 [-------->-------------------]
e[2K 22200 [------------------------>—]
e[2K 22300 [------------>---------------]
e[2K 22400 [>---------------------------]
e[2K 22500 [---------------->-----------]
e[2K 22600 [---->-----------------------]
e[2K 22700 [-------------------->-------]
e[2K 22750 [============================]

Finished setting permissions

Unable to run Pre-Asterisk hooks, because Asterisk is already running on PID 2855 and has been running for 21 seconds

Running Asterisk post from Dahdiconfig module

Running Asterisk post from Pagingpro module

Running Asterisk post from Ucpnode module

Starting UCP Node Server…

[>---------------------------] < 1 sec
e[2K[>---------------------------] 2 secs

Started UCP Node Server. PID is 3408

Running Asterisk post from Vqplus module

[37;41mRestApps is not licensed.e[39;49m

Running Asterisk post from Xmpp module

[>---------------------------] < 1 sec
e[2K[>---------------------------] < 1 secShorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=786 TOS=0x00 PREC=0x00 TTL=107 ID=21077 PROTO=UDP SPT=5074 DPT=5060 LEN=766
Resetting PBX Users Failed: The command “node /var/www/html/admin/modules/xmpp/node/resetpbxusers.js” failed.

Exit Code: 1(General error)

Working directory: /

Output:

================

Error Output:

================

Unable to connect to the PBX!PHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

/var/www/html/admin/modules/xmpp/node/node_modules/freepbx/lib/freepbx.js:25

			throw "There was an error trying to connect to the PBX";

			^

There was an error trying to connect to the PBX

PHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

Stopping fail2ban: [ OK ]

Ensuring logfiles are presentStarting fail2ban: WARNING ‘action’ not defined in ‘lighttpd-fastcgi’. Using default one: ‘’

WARNING ‘action’ not defined in ‘php-url-fopen’. Using default one: ‘’

WARNING ‘action’ not defined in ‘lighttpd-auth’. Using default one: ‘’

[ OK ]

SHMZ release 6.6 (Final)
Kernel 2.6.32-642.6.2.el6.x86_64 on an x86_64

ip-172-31-28-117 login: Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.2.2.4 LEN=132 TOS=0x00 PREC=0x00 TTL=3 ID=0 DF PROTO=UDP SPT=54328 DPT=54328 LEN=112
Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.2.2.4 LEN=132 TOS=0x00 PREC=0x00 TTL=3 ID=0 DF PROTO=UDP SPT=54328 DPT=54328 LEN=112
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=788 TOS=0x00 PREC=0x00 TTL=107 ID=21078 PROTO=UDP SPT=5071 DPT=5060 LEN=768
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=788 TOS=0x00 PREC=0x00 TTL=108 ID=21079 PROTO=UDP SPT=5070 DPT=5060 LEN=768
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=788 TOS=0x00 PREC=0x00 TTL=107 ID=21080 PROTO=UDP SPT=5071 DPT=5060 LEN=768
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=185.169.231.209 DST=172.31.28.117 LEN=40 TOS=0x00 PREC=0x00 TTL=234 ID=64460 PROTO=TCP SPT=65535 DPT=8890 WINDOW=1024 RES=0x00 SYN URGP=0
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=786 TOS=0x00 PREC=0x00 TTL=107 ID=21081 PROTO=UDP SPT=5071 DPT=5060 LEN=766
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=787 TOS=0x00 PREC=0x00 TTL=107 ID=21082 PROTO=UDP SPT=5074 DPT=5060 LEN=767
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=104.236.188.225 DST=172.31.28.117 LEN=40 TOS=0x00 PREC=0x00 TTL=228 ID=54321 PROTO=TCP SPT=33623 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.13 DST=172.31.28.117 LEN=438 TOS=0x00 PREC=0x00 TTL=44 ID=32939 DF PROTO=UDP SPT=5170 DPT=5060 LEN=418
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=787 TOS=0x00 PREC=0x00 TTL=108 ID=21083 PROTO=UDP SPT=5078 DPT=5060 LEN=767
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=787 TOS=0x00 PREC=0x00 TTL=107 ID=21084 PROTO=UDP SPT=5074 DPT=5060 LEN=767
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=185.169.231.209 DST=172.31.28.117 LEN=40 TOS=0x00 PREC=0x00 TTL=234 ID=61747 PROTO=TCP SPT=65535 DPT=8888 WINDOW=1024 RES=0x00 SYN URGP=0
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=788 TOS=0x00 PREC=0x00 TTL=108 ID=21085 PROTO=UDP SPT=5078 DPT=5060 LEN=768
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=164.52.24.169 DST=172.31.28.117 LEN=44 TOS=0x00 PREC=0x00 TTL=229 ID=54321 PROTO=TCP SPT=41460 DPT=5060 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=164.52.24.169 DST=172.31.28.117 LEN=44 TOS=0x00 PREC=0x00 TTL=232 ID=54321 PROTO=TCP SPT=41461 DPT=5060 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=787 TOS=0x00 PREC=0x00 TTL=107 ID=21086 PROTO=UDP SPT=5077 DPT=5060 LEN=767
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=788 TOS=0x00 PREC=0x00 TTL=108 ID=21087 PROTO=UDP SPT=5076 DPT=5060 LEN=768
Shorewall:IN=eth0 OUT= MAC=02:b1:a5:3d:22:fe:16:38:45:00:00:02:08:00 SRC=37.49.231.78 DST=172.31.28.117 LEN=786 TOS=0x00 PREC=0x00 TTL=108 ID=21088 PROTO=UDP SPT=5078 DPT=5060 LEN=766
Shutting down Avahi daemon: Shorewall:IN=eth0 OUT= MAC= SRC=172.31.28.117 DST=224.0.0.251 LEN=475 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=455
[ OK ]

Shutting down Filesystem event daemon (incrond): [ OK ]

Stopping atd: [ OK ]

Stopping safe_asterisk: [ OK ]

Shutting down asterisk: [ OK ]

Stopping fail2ban: [ OK ]

Stopping cups: [ OK ]

Stopping httpd: [ OK ]

Stopping elasticsearch: [ OK ]

Stopping newrelic-sysmond: [ OK ]
[ OK ]

Stopping sshd: [ OK ]

Shutting down postfix: [ OK ]

Shutting down dnsmasq: [ OK ]

Stopping xinetd: [ OK ]

Stopping crond: [ OK ]

Stopping acpi daemon: [ OK ]

Stopping HAL daemon: [ OK ]

Shutting down ntpd: [ OK ]

Stopping block device availability: Deactivating block devices:
[ OK ]

Unloading DAHDI hardware modules: usbcore: deregistering interface driver xpp_usb
dahdi: Telephony Interface Unloaded
done
Stopping NetworkManager daemon: [ OK ]

Stopping system message bus: [ OK ]

Stopping rpcbind: [ OK ]

Stopping auditd: type=1305 audit(1531314018.610:1453): audit_pid=0 old=1468 auid=4294967295 ses=4294967295 res=1
[ OK ]

type=1305 audit(1531314018.710:1454): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
Shutting down system logger: [ OK ]

Shutting down interface eth0: [ OK ]

Shutting down loopback interface: [ OK ]

iptables: Setting chains to policy ACCEPT: mangle filter [ OK ]

iptables: Flushing firewall rules: [ OK ]

iptables: Unloading modules: [ OK ]

ipset: Flushing and destroying IP sets: [ OK ]

Shutting down UPS monitoring:[FAILED]

Stopping mysqld: [ OK ]

Sending all processes the TERM signal… init: sangoma-pnp-service main process (2399) killed by TERM signal

init: sangoma-pnp-service main process ended, respawning

[ OK ]

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service main process ended, respawning

init: sangoma-pnp-service respawning too fast, stopped

Sending all processes the KILL signal… [ OK ]

Saving random seed: [ OK ]

Syncing hardware clock to system time [ OK ]

Turning off swap: [ OK ]


(Slashroot) #3

Console log, part2:

init: Re-executing /sbin/init

Please stand by while rebooting the system…
xenbus_dev_shutdown: device/console/0: Initialising != Connected, skipping
Restarting system.
machine restart
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-693.2.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Sep 12 22:26:13 UTC 2017
[ 0.000000] Command line: ro root=/dev/xvda1 console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us crashkernel=auto SYSFONT=latarcyrheb-sun16 upgrade init=/usr/libexec/upgrade-init selinux=0 rd.plymouth=0 plymouth.enable=0 net.ifnames=0 consoleblank=0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000020fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.2.
[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] e820: last_pfn = 0x210000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fbc50-0x000fbc5f] mapped at [ffff8800000fbc50]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x355c6000-0x37feffff]
[ 0.000000] Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc00e2a0 00054 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc00df60 000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc0021c0 0BD19 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: FACS 00000000fc002180 00040
[ 0.000000] ACPI: APIC 00000000fc00e060 000D8 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: HPET 00000000fc00e1b0 00038 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: WAET 00000000fc00e1f0 00028 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: SSDT 00000000fc00e220 00031 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: SSDT 00000000fc00e260 00031 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000020fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x20ffd8000-0x20fffefff]
[ 0.000000] Reserving 161MB of memory at 688MB for crashkernel (System RAM: 8191MB)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x20fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xefffffff]
[ 0.000000] node 0: [mem 0x100000000-0x20fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x20fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 15 CPUs, 13 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880207200000 s97048 r8192 d29928 u262144
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064264
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/xvda1 console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us crashkernel=auto SYSFONT=latarcyrheb-sun16 upgrade init=/usr/libexec/upgrade-init selinux=0 rd.plymouth=0 plymouth.enable=0 net.ifnames=0 consoleblank=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Memory: 5738880k/8650752k available (6886k kernel code, 262540k absent, 423988k reserved, 4545k data, 1764k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=15.
[ 0.000000] NR_IRQS:327936 nr_irqs:952 0
[ 0.000000] xen:events: Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try ‘cgroup_disable=memory’ option if you don’t want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2300.225 MHz processor
[ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency… 4600.09 BogoMIPS (lpj=2300046)
[ 0.023002] pid_max: default: 32768 minimum: 301
[ 0.025045] Security Framework initialized
[ 0.026008] SELinux: Disabled at boot.
[ 0.028002] Yama: becoming mindful.
[ 0.030372] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034821] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.038317] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040010] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.044046] Initializing cgroup subsys memory
[ 0.045008] Initializing cgroup subsys devices
[ 0.047003] Initializing cgroup subsys freezer
[ 0.049003] Initializing cgroup subsys net_cls
[ 0.051002] Initializing cgroup subsys blkio
[ 0.053002] Initializing cgroup subsys perf_event
[ 0.054003] Initializing cgroup subsys hugetlb
[ 0.056002] Initializing cgroup subsys pids
[ 0.058002] Initializing cgroup subsys net_prio
[ 0.059052] CPU: Physical Processor ID: 0
[ 0.062047] mce: CPU supports 2 MCE banks
[ 0.063025] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.065002] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.067002] tlb_flushall_shift: 6
[ 0.069216] Freeing SMP alternatives: 24k freed
[ 0.076024] ACPI: Core revision 20130517
[ 0.081258] ACPI: All ACPI Tables successfully acquired
[ 0.084125] ftrace: allocating 26586 entries in 104 pages
[ 0.111093] smpboot: Max logical packages: 15
[ 0.114426] IRQ remapping doesn’t support X2APIC mode, disable x2apic.
[ 0.117003] Switched APIC routing to physical flat.
[ 0.122219] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.134553] smpboot: CPU0: Intel® Xeon® CPU E5-2686 v4 @ 2.30GHz (fam: 06, model: 4f, stepping: 01)
[ 0.141015] installing Xen timer for CPU 0
[ 0.143086] cpu 0 spinlock event irq 53
[ 0.144011] Performance Events: unsupported p6 CPU model 79 no PMU driver, software events only.
[ 0.148221] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.149004] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.150059] installing Xen timer for CPU 1
[ 0.151062] smpboot: Booting Node 0, Processors #1cpu 1 spinlock event irq 59
[ 0.155034] Brought up 2 CPUs
[ 0.156005] smpboot: Total of 2 processors activated (9200.18 BogoMIPS)
[ 0.166980] node 0 initialised, 556336 pages in 9ms
[ 0.167103] devtmpfs: initialized
[ 0.169875] EVM: security.selinux
[ 0.170004] EVM: security.ima
[ 0.171003] EVM: security.capability
[ 0.172757] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.173011] pinctrl core: initialized pinctrl subsystem
[ 0.174052] RTC time: 13:00:44, date: 07/11/18
[ 0.175091] NET: Registered protocol family 16
[ 0.176128] ACPI: bus type PCI registered
[ 0.178006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.181283] PCI: Using configuration type 1 for base access
[ 0.187087] random: fast init done
[ 0.187087] ACPI: Added _OSI(Module Device)
[ 0.187087] ACPI: Added _OSI(Processor Device)
[ 0.187087] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.187087] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.199881] ACPI: Interpreter enabled
[ 0.200017] ACPI: (supports S0 S3 S4 S5)
[ 0.201005] ACPI: Using IOAPIC for interrupt routing
[ 0.202025] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.264840] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.265011] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.266010] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.267101] acpi PNP0A03:00: fail to add MMCONFIG information, can’t access extended PCI configuration space under this bridge.
[ 0.268818] acpiphp: Slot [0] registered
[ 0.270058] acpiphp: Slot [3] registered
[ 0.271390] acpiphp: Slot [4] registered
[ 0.272394] acpiphp: Slot [5] registered
[ 0.273394] acpiphp: Slot [6] registered
[ 0.274385] acpiphp: Slot [7] registered
[ 0.275384] acpiphp: Slot [8] registered
[ 0.276375] acpiphp: Slot [9] registered
[ 0.277369] acpiphp: Slot [10] registered
[ 0.278386] acpiphp: Slot [11] registered
[ 0.279378] acpiphp: Slot [12] registered
[ 0.280398] acpiphp: Slot [13] registered
[ 0.281397] acpiphp: Slot [14] registered
[ 0.282401] acpiphp: Slot [15] registered
[ 0.283387] acpiphp: Slot [16] registered
[ 0.284372] acpiphp: Slot [17] registered
[ 0.285408] acpiphp: Slot [18] registered
[ 0.286370] acpiphp: Slot [19] registered
[ 0.287393] acpiphp: Slot [20] registered
[ 0.288396] acpiphp: Slot [21] registered
[ 0.289391] acpiphp: Slot [22] registered
[ 0.290396] acpiphp: Slot [23] registered
[ 0.291398] acpiphp: Slot [24] registered
[ 0.292393] acpiphp: Slot [25] registered
[ 0.293402] acpiphp: Slot [26] registered
[ 0.294399] acpiphp: Slot [27] registered
[ 0.295401] acpiphp: Slot [28] registered
[ 0.296392] acpiphp: Slot [29] registered
[ 0.297394] acpiphp: Slot [30] registered
[ 0.298388] acpiphp: Slot [31] registered
[ 0.299400] PCI host bridge to bus 0000:00
[ 0.300007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.301005] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.302005] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.303005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.304005] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
[ 0.310993] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.311004] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.312004] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.313004] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.314824] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.314824] * this clock source is slow. Consider trying other clock sources
[ 0.316729] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.325472] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.327234] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.329227] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.331234] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.352694] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.353080] xen:balloon: Initialising balloon driver
[ 0.357024] xen_balloon: Initialising balloon driver
[ 0.360110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.365004] vgaarb: loaded
[ 0.366004] vgaarb: bridge control possible 0000:00:02.0
[ 0.370077] SCSI subsystem initialized
[ 0.372027] ACPI: bus type USB registered
[ 0.374022] usbcore: registered new interface driver usbfs
[ 0.378010] usbcore: registered new interface driver hub
[ 0.381036] usbcore: registered new device driver usb
[ 0.384050] PCI: Using ACPI for IRQ routing
[ 0.385644] NetLabel: Initializing
[ 0.386004] NetLabel: domain hash size = 128
[ 0.387003] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.388017] NetLabel: unlabeled traffic allowed by default
[ 0.389068] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.390017] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.391948] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[ 0.393024] amd_nb: Cannot enumerate AMD northbridges
[ 0.394027] Switched to clocksource xen
[ 0.400609] pnp: PnP ACPI init
[ 0.402633] ACPI: bus type PNP registered
[ 0.405246] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.409673] system 00:01: [io 0x08a0-0x08a3] has been reserved
[ 0.413432] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
[ 0.417229] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.421189] system 00:07: [io 0x10c0-0x1141] has been reserved
[ 0.424958] system 00:07: [io 0xb044-0xb047] has been reserved
[ 0.449086] pnp: PnP ACPI: found 8 devices
[ 0.451923] ACPI: bus type PNP unregistered
[ 0.461742] NET: Registered protocol family 2
[ 0.464978] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.469930] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.474541] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.478986] TCP: reno registered
[ 0.481323] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.485456] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.489828] NET: Registered protocol family 1
[ 0.492696] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.496543] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.500431] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.504599] Unpacking initramfs…
[ 3.562241] Freeing initrd memory: 43176k freed
[ 3.574035] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.576567] software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff8800ec000000-ffff8800efffffff]
[ 3.580602] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.583691] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.585873] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.588032] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.590190] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.592730] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 3.595095] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 3.597922] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 3.600312] Initialise system trusted keyring
[ 3.602018] audit: initializing netlink socket (disabled)
[ 3.604079] type=2000 audit(1531314047.621:1): initialized
[ 3.626677] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 3.629149] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.632410] zpool: loaded
[ 3.633447] zbud: loaded
[ 3.634578] VFS: Disk quotas dquot_6.5.2
[ 3.636096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.639102] msgmni has been set to 15639
[ 3.640658] Key type big_key registered
[ 3.642654] NET: Registered protocol family 38
[ 3.644360] Key type asymmetric registered
[ 3.645911] Asymmetric key parser ‘x509’ registered
[ 3.647848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.650663] io scheduler noop registered
[ 3.652190] io scheduler deadline registered (default)
[ 3.654165] io scheduler cfq registered
[ 3.655709] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.657864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.660493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.663281] ACPI: Power Button [PWRF]
[ 3.664711] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 3.667661] ACPI: Sleep Button [SLPF]
[ 3.669529] GHES: HEST is not enabled!
[ 3.671424] xen:grant_table: Grant tables using version 1 layout
[ 3.673820] Grant table initialized
[ 3.675257] Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
[ 3.677530] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.705739] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.709219] Non-volatile memory driver v1.3
[ 3.710837] Linux agpgart interface v0.103
[ 3.712544] crash memory driver: version 1.1
[ 3.714616] rdac: device handler registered
[ 3.716782] hp_sw: device handler registered
[ 3.718939] emc: device handler registered
[ 3.720809] alua: device handler registered
[ 3.722772] libphy: Fixed MDIO Bus: probed
[ 3.724699] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 3.727595] ehci-pci: EHCI PCI platform driver
[ 3.729611] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 3.732338] ohci-pci: OHCI PCI platform driver
[ 3.734322] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.737057] usbcore: registered new interface driver usbserial
[ 3.739645] usbcore: registered new interface driver usbserial_generic
[ 3.742436] usbserial: USB Serial support registered for generic
[ 3.744883] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.749705] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.751682] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.753744] mousedev: PS/2 mouse device common for all mice
[ 3.756730] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.760235] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.763603] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 3.767665] cpuidle: using governor menu
[ 3.769327] hidraw: raw HID events driver © Jiri Kosina
[ 3.771504] usbcore: registered new interface driver usbhid
[ 3.773865] usbhid: USB HID core driver
[ 3.775663] drop_monitor: Initializing network drop monitor service
[ 3.778411] TCP: cubic registered
[ 3.779726] Initializing XFRM netlink socket
[ 3.781481] NET: Registered protocol family 10
[ 3.783463] NET: Registered protocol family 17
[ 3.785357] microcode: CPU0 sig=0x406f1, pf=0x1, revision=0xb00002a
[ 3.788186] microcode: CPU1 sig=0x406f1, pf=0x1, revision=0xb00002a
[ 3.790659] microcode: Microcode Update Driver: v2.01 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 3.794266] Loading compiled-in X.509 certificates
[ 3.796125] Loaded X.509 cert ‘CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717’
[ 3.799900] Loaded X.509 cert ‘CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b’
[ 3.804176] Loaded X.509 cert ‘CentOS Linux kernel signing key: c08b355341760f030a64e3c550e113cd47771ea9’
[ 3.807887] registered taskstats version 1
[ 3.811207] Key type trusted registered
[ 3.814744] Key type encrypted registered
[ 3.817691] IMA: No TPM chip found, activating TPM-bypass!
[ 3.820148] xenbus_probe_frontend: Device with no driver: device/vbd/768
[ 3.822678] xenbus_probe_frontend: Device with no driver: device/vif/0
[ 3.825232] Magic number: 10:172:28
[ 3.826795] rtc_cmos 00:02: setting system clock to 2018-07-11 13:00:48 UTC (1531314048)
[ 3.831281] Freeing unused kernel memory: 1764k freed
[ 3.837093] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.844180] systemd[1]: Detected virtualization xen.
[ 3.846103] systemd[1]: Detected architecture x86-64.
[ 3.848087] systemd[1]: Running in initial RAM disk.

Welcome to e[0;34mSangoma Linux 7 (Core) dracut-033-502.el7 (Initramfs)e[0m!

[ 3.851589] systemd[1]: No hostname configured.
[ 3.854555] systemd[1]: Set hostname to .
[ 3.856452] systemd[1]: Initializing machine ID from random generator.
[e[32m OK e[0m] Reached target Swap.
[ 3.886552] systemd[1]: Reached target Swap.
[ 3.888729] systemd[1]: Starting Swap.
[e[32m OK e[0m] Created slice Root Slice.
[ 3.893045] systemd[1]: Created slice Root Slice.
[ 3.895267] systemd[1]: Starting Root Slice.
[e[32m OK e[0m] Listening on udev Control Socket.
[ 3.899647] systemd[1]: Listening on udev Control Socket.
[ 3.901756] systemd[1]: Starting udev Control Socket.
[e[32m OK e[0m] Listening on udev Kernel Socket.
[ 3.906084] systemd[1]: Listening on udev Kernel Socket.
[ 3.908180] systemd[1]: Starting udev Kernel Socket.
[e[32m OK e[0m] Reached target Timers.
[ 3.912239] systemd[1]: Reached target Timers.
[ 3.913982] systemd[1]: Starting Timers.
[e[32m OK e[0m] Created slice System Slice.
[ 3.917860] systemd[1]: Created slice System Slice.
[ 3.919744] systemd[1]: Starting System Slice.
[e[32m OK e[0m] Reached target Slices.
[ 3.923652] systemd[1]: Reached target Slices.
[ 3.925491] systemd[1]: Starting Slices.
[e[32m OK e[0m] Started Debug shell on tty2.
[ 3.930318] systemd[1]: Started Debug shell on tty2.
[ 3.932426] systemd[1]: Starting Debug shell on tty2…
Starting Debug shell on tty2…
[e[32m OK e[0m] Reached target Local File Systems.
[ 3.938105] systemd[1]: Reached target Local File Systems.
[ 3.940998] systemd[1]: Starting Local File Systems.
[e[32m OK e[0m] Listening on Journal Socket.
[ 3.945226] systemd[1]: Listening on Journal Socket.
[ 3.947172] systemd[1]: Starting Journal Socket.
[e[32m OK e[0m] Reached target Sockets.
[ 3.951129] systemd[1]: Reached target Sockets.
[ 3.952889] systemd[1]: Starting Sockets.
[ 3.954989] systemd[1]: Starting Create list of required static device nodes for the current kernel…
Starting Create list of required st… nodes for the current kernel…
[ 3.962181] systemd[1]: Starting Setup Virtual Console…
Starting Setup Virtual Console…
[ 3.968428] systemd[1]: Starting Apply Kernel Variables…
Starting Apply Kernel Variables…
[ 3.973350] systemd[1]: Starting Journal Service…
Starting Journal Service…
[ 3.978516] systemd[1]: Starting dracut cmdline hook…
Starting dracut cmdline hook…
[e[32m OK e[0m] Started Create list of required sta…ce nodes for the current kernel.
[ 3.987478] systemd[1]: Started Create list of required static device nodes for the current kernel.
[e[32m OK e[0m] Started Setup Virtual Console.
[ 3.995001] systemd[1]: Started Setup Virtual Console.
[e[32m OK e[0m] Started Apply Kernel Variables.
[ 4.000691] systemd[1]: Started Apply Kernel Variables.
[e[32m OK e[0m] Started Journal Service.
[ 4.006162] systemd[1]: Started Journal Service.
Starting Create Static Device Nodes in /dev…
[e[32m OK e[0m] Started Create Static Device Nodes in /dev.
[e[32m OK e[0m] Started dracut cmdline hook.
Starting dracut pre-udev hook…
[ 4.089434] device-mapper: uevent: version 1.0.3
[ 4.091304] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 4.122088] RPC: Registered named UNIX socket transport module.
[ 4.124368] RPC: Registered udp transport module.
[ 4.126166] RPC: Registered tcp transport module.
[ 4.128038] RPC: Registered tcp NFSv4.1 backchannel transport module.
[e[32m OK e[0m] Started dracut pre-udev hook.
Starting udev Kernel Device Manager…
[e[32m OK e[0m] Started udev Kernel Device Manager.
Starting dracut pre-trigger hook…
[e[32m OK e[0m] Started dracut pre-trigger hook.
Starting udev Coldplug all Devices…
Mounting Configuration File System…
[e[32m OK e[0m] Mounted Configuration File System.
[e[32m OK e[0m] Started udev Coldplug all Devices.
[e[32m OK e[0m] Reached target Paths.
Starting dracut initqueue hook…
[e[32m OK e[0m] Reached target System Initialization.
[e[32m OK e[0m] Reached target Basic System.
[ 4.312285] FDC 0 is a S82078B
[ 4.352836] xen_blkfront: Unknown parameter `sda_is_xvda’
[ 4.357170] xen_netfront: Initialising Xen virtual ethernet driver
[ 4.378160] scsi host0: ata_piix
[ 4.378257] scsi host1: ata_piix
[ 4.378282] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
[ 4.378284] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
[ 4.392232] [drm] Initialized
[ 4.413550] [TTM] Zone kernel: Available graphics memory: 4004594 kiB
[ 4.418907] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.424238] [TTM] Initializing pool allocator
[ 4.427764] [TTM] Initializing DMA pool allocator
[ 4.432163] [drm] fb mappable at 0xF0000000
[ 4.434068] [drm] vram aper at 0xF0000000
[ 4.435868] [drm] size 33554432
[ 4.437336] [drm] fb depth is 24
[ 4.438837] [drm] pitch is 3072
[ 4.440471] fbcon: cirrusdrmfb (fb0) is primary device
[ 4.495091] Console: switching to colour frame buffer device 128x48
[ 4.543506] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
[ 4.547087] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
[ 4.595103] tsc: Refined TSC clocksource calibration: 2299.999 MHz
[ 4.603070] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 27.841077] random: crng init done
[ 127.076763] dracut-initqueue[315]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 127.590261] dracut-initqueue[315]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 128.099627] dracut-initqueue[315]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 128.609597] dracut-initqueue[315]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 129.119144] dracut-initqueue[315]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 129.626271] dracut-initqueue[315]: Warning: dracut-initqueue timeout - starting timeout scripts


(Slashroot) #4

Not sure if it’s the connection to MySQL that causes the server to hang:

xception: SQLSTATE[HY000] [2002] Can’t connect to local MySQL server through socket ‘/var/lib/mysql/mysql.sock’ (2)::SQLSTATE[HY000] [2002] Can’t connect to local MySQL server through socket ‘/var/lib/mysql/mysql.sock’ (2) in file /var/www/html/admin/libraries/utility.functions.php on line 204

Stack trace:

Exception->() /var/www/html/admin/libraries/utility.functions.php:204

die_freepbx() /var/www/html/admin/libraries/BMO/Database.class.php:131

PDOException->() /var/www/html/admin/libraries/BMO/Database.class.php:128

PDO->__construct() /var/www/html/admin/libraries/BMO/Database.class.php:128

FreePBX\Database->__construct() /var/www/html/admin/libraries/BMO/FreePBX.class.php:72

FreePBX->__construct() /var/www/html/admin/bootstrap.php:141

require_once() /etc/freepbx.conf:12

include() /var/www/html/admin/modules/vqplus/queue-callback.php:10

Or if it’s this part:

Resetting PBX Users Failed: The command “node /var/www/html/admin/modules/xmpp/node/resetpbxusers.js” failed.

Exit Code: 1(General error)

Working directory: /

Output:

================

Error Output:

================

Unable to connect to the PBX!PHP Deprecated: Directive ‘register_globals’ is deprecated in PHP 5.3 and greater in Unknown on line 0

/var/www/html/admin/modules/xmpp/node/node_modules/freepbx/lib/freepbx.js:25

			throw "There was an error trying to connect to the PBX";

			^

There was an error trying to connect to the PBX