Updated core and other modules, no incoming calls after that. Help please

System at FreePBX 2.11.0.41 and was working great yesterday. I did the updates in the admin module to core and a few others as there was a notice about the vulnerability. Once I applied the updates, the system no longer takes incoming calls. The status page shows the call come in and then drops. I have made no changes, looked at the Dahdi config, the incoming routes etc,and see no issues with config. This is a production site, and they are closed for weekend, but need to get back up before Monday. The logs show some errors, but well beyond my scope of understanding in this system, as I am an old school pbx guy.

Here is the logs. I wold appreciate if I could get a nod in the direction of the issue, as the only thing that has happened in the update. I can see that the system sees the incoming calls, but not processing them.

[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] app_macro.c: == Channel ‘DAHDI/6-1’ jumping out of macro ‘from-dahdi-6’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/6-1”, “__FROM_DID=2507240933”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/6-1”, “CDR(did)=2507240933”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:3] Gosub(“DAHDI/6-1”, “cidlookup,cidlookup_1,1()”) in new stack
[2014-11-15 10:36:58] ERROR[5481][C-0000000c] app_stack.c: Attempt to reach a non-existent destination for Gosub: (Context:cidlookup, Extension:cidlookup_1, Priority:1)
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: == Spawn extension (from-trunk, 2507240933, 3) exited non-zero on ‘DAHDI/6-1’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:1] Macro(“DAHDI/6-1”, “hangupcall,”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/6-1”, “1?theend”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Goto (macro-hangupcall,s,3)
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:3] ExecIf(“DAHDI/6-1”, “0?Set(CDR(recordingfile)=)”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:4] Hangup(“DAHDI/6-1”, “”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/6-1’ in macro ‘hangupcall’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: == Spawn extension (from-trunk, h, 1) exited non-zero on ‘DAHDI/6-1’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] sig_analog.c: – Hanging up on ‘DAHDI/6-1’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] chan_dahdi.c: – Hungup ‘DAHDI/6-1’
[2014-11-15 10:36:59] VERBOSE[5487][C-0000000d] sig_analog.c: – Starting simple switch on ‘DAHDI/2-1’
[2014-11-15 10:37:04] VERBOSE[5494][C-0000000e] sig_analog.c: – Starting simple switch on ‘DAHDI/6-1’
[2014-11-15 10:37:06] VERBOSE[5495][C-0000000f] sig_analog.c: – Starting simple switch on ‘DAHDI/7-1’
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:1] NoOp(“DAHDI/7-1”, "Entering from-dahdi with DID == ") in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:2] Ringing(“DAHDI/7-1”, “”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/7-1”, “DID=s”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:4] NoOp(“DAHDI/7-1”, “DID is now s”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:5] GotoIf(“DAHDI/7-1”, “1?dahdiok:checkzap”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Goto (from-analog,s,9)
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:9] NoOp(“DAHDI/7-1”, “Is a DAHDi Channel”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/7-1”, “CHAN=7-1”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:11] Set(“DAHDI/7-1”, “CHAN=7”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:12] Macro(“DAHDI/7-1”, “from-dahdi-7,s,1”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:1] NoOp(“DAHDI/7-1”, “Entering macro-from-dahdi-7 with DID = s and setting to: 2507240933”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/7-1”, “__FROM_DID=2507240933”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Executing [[email protected]:3] Goto(“DAHDI/7-1”, “from-trunk,2507240933,1”) in new stack
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] pbx.c: – Goto (from-trunk,2507240933,1)
[2014-11-15 10:37:07] VERBOSE[5495][C-0000000f] app_macro.c: == Channel ‘DAHDI/7-1’ jumping out of macro ‘from-dahdi-7’

I tried to post more but get error about

[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Goto (from-trunk,2507240933,1)
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] app_macro.c: == Channel ‘DAHDI/6-1’ jumping out of macro ‘from-dahdi-6’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/6-1”, “__FROM_DID=2507240933”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/6-1”, “CDR(did)=2507240933”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:3] Gosub(“DAHDI/6-1”, “cidlookup,cidlookup_1,1()”) in new stack
[2014-11-15 10:36:58] ERROR[5481][C-0000000c] app_stack.c: Attempt to reach a non-existent destination for Gosub: (Context:cidlookup, Extension:cidlookup_1, Priority:1)
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: == Spawn extension (from-trunk, 2507240933, 3) exited non-zero on ‘DAHDI/6-1’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:1] Macro(“DAHDI/6-1”, “hangupcall,”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/6-1”, “1?theend”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Goto (macro-hangupcall,s,3)
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:3] ExecIf(“DAHDI/6-1”, “0?Set(CDR(recordingfile)=)”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: – Executing [[email protected]:4] Hangup(“DAHDI/6-1”, “”) in new stack
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/6-1’ in macro ‘hangupcall’
[2014-11-15 10:36:58] VERBOSE[5481][C-0000000c] pbx.c: == Spawn extension (from-trunk, h, 1) exited non-zero on ‘DAHDI/6-1’
[2014-11-15 10:36 only mentioning 2 users in a post. Her isw another chunk

That is your error. You are sending your DAHDi channels to an Inbound Route that as an improperly setup CIDLookup route. Because it can’t find the CIDLookup it is hanging up.

That’s awesome! How do i.correct it? Thank you sooo much for lending a
hand.