Trunks and Outbound routes setup, Help, please!

Hello from Spain. If anyone speak Spanish, please tell me!!

I configured my VOIP SIP Provider (Fonworld) Asterisk-Gui Digium. Then, I changed to FreePBX Distro…The interface is better than Digium, except one thing. I dont’t know how yo configure my VOIP SIP Provider: ever is busy or problems with the dial. It’s a hell.

I don’t know what’s the problem. I think that the problem is in the Dialed Number Manipulation Rules or Dial Patterns that will use this Route. Help, please!!!

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [[email protected]:1] Macro(“SIP/100-00000016”, “user-callerid,LIMIT,”) in new stack
– Executing [[email protected]:1] Set(“SIP/100-00000016”, “AMPUSER=100”) in new stack
– Executing [[email protected]:2] GotoIf(“SIP/100-00000016”, “0?report”) in new stack
– Executing [[email protected]:3] ExecIf(“SIP/100-00000016”, “1?Set(REALCALLERIDNUM=100)”) in new stack
– Executing [[email protected]:4] Set(“SIP/100-00000016”, “AMPUSER=100”) in new stack
– Executing [[email protected]:5] Set(“SIP/100-00000016”, “AMPUSERCIDNAME=Rafa Ramos”) in new stack
– Executing [[email protected]:6] GotoIf(“SIP/100-00000016”, “0?report”) in new stack
– Executing [[email protected]:7] Set(“SIP/100-00000016”, “AMPUSERCID=100”) in new stack
– Executing [[email protected]:8] Set(“SIP/100-00000016”, “CALLERID(all)=“Rafa Ramos” <100>”) in new stack
– Executing [[email protected]:9] GotoIf(“SIP/100-00000016”, “0?limit”) in new stack
– Executing [[email protected]:10] ExecIf(“SIP/100-00000016”, “1?Set(GROUP(concurrency_limit)=100)”) in new stack
– Executing [[email protected]:11] GotoIf(“SIP/100-00000016”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,24)
– Executing [[email protected]:24] Set(“SIP/100-00000016”, “CALLERID(number)=100”) in new stack
– Executing [[email protected]:25] Set(“SIP/100-00000016”, “CALLERID(name)=Rafa Ramos”) in new stack
– Executing [[email protected]:26] Set(“SIP/100-00000016”, “CHANNEL(language)=es”) in new stack
– Executing [[email protected]:2] Set(“SIP/100-00000016”, “_NODEST=”) in new stack
– Executing [[email protected]:3] Gosub(“SIP/100-00000016”, “sub-record-check,s,1(out,0034955989089,)”) in new stack
– Executing [[email protected]:1] GotoIf(“SIP/100-00000016”, “1?check”) in new stack
– Goto (sub-record-check,s,6)
– Executing [[email protected]:6] Set(“SIP/100-00000016”, “__MON_FMT=wav”) in new stack
– Executing [[email protected]:7] GotoIf(“SIP/100-00000016”, “1?next”) in new stack
– Goto (sub-record-check,s,10)
– Executing [[email protected]:10] ExecIf(“SIP/100-00000016”, “0?Return()”) in new stack
– Executing [[email protected]:11] GotoIf(“SIP/100-00000016”, “0?out,1”) in new stack
– Executing [[email protected]:12] Set(“SIP/100-00000016”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [[email protected]:13] ExecIf(“SIP/100-00000016”, “0?Set(__REC_POLICY_MODE=)”) in new stack
– Executing [[email protected]:14] Set(“SIP/100-00000016”, “NOW=1339746664”) in new stack
– Executing [[email protected]:15] Set(“SIP/100-00000016”, “__DAY=15”) in new stack
– Executing [[email protected]:16] Set(“SIP/100-00000016”, “__MONTH=06”) in new stack
– Executing [[email protected]:17] Set(“SIP/100-00000016”, “__YEAR=2012”) in new stack
– Executing [[email protected]:18] Set(“SIP/100-00000016”, “__TIMESTR=20120615-095104”) in new stack
– Executing [[email protected]:19] Set(“SIP/100-00000016”, “__FROMEXTEN=100”) in new stack
– Executing [[email protected]:20] Set(“SIP/100-00000016”, “__CALLFILENAME=out-0034955989089-100-20120615-095104-1339746664.22”) in new stack
– Executing [[email protected]:21] Goto(“SIP/100-00000016”, “out,1”) in new stack
– Goto (sub-record-check,out,1)
– Executing [[email protected]:1] ExecIf(“SIP/100-00000016”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
– Executing [[email protected]:2] GosubIf(“SIP/100-00000016”, “0?record,1(exten,0034955989089,100)”) in new stack
– Executing [[email protected]:3] Return(“SIP/100-00000016”, “”) in new stack
– Executing [[email protected]:4] Macro(“SIP/100-00000016”, “dialout-trunk,1,0034955989089,”) in new stack
– Executing [[email protected]:1] Set(“SIP/100-00000016”, “DIAL_TRUNK=1”) in new stack
– Executing [[email protected]:2] GosubIf(“SIP/100-00000016”, “0?sub-pincheck,s,1()”) in new stack
– Executing [[email protected]:3] GotoIf(“SIP/100-00000016”, “0?disabletrunk,1”) in new stack
– Executing [[email protected]:4] Set(“SIP/100-00000016”, “DIAL_NUMBER=0034955989089”) in new stack
– Executing [[email protected]:5] Set(“SIP/100-00000016”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
– Executing [[email protected]:6] Set(“SIP/100-00000016”, “OUTBOUND_GROUP=OUT_1”) in new stack
– Executing [[email protected]:7] GotoIf(“SIP/100-00000016”, “1?nomax”) in new stack
– Goto (macro-dialout-trunk,s,9)
– Executing [[email protected]:9] GotoIf(“SIP/100-00000016”, “0?skipoutcid”) in new stack
– Executing [[email protected]:10] Set(“SIP/100-00000016”, “DIAL_TRUNK_OPTIONS=”) in new stack
– Executing [[email protected]:11] Macro(“SIP/100-00000016”, “outbound-callerid,1”) in new stack
– Executing [[email protected]:1] ExecIf(“SIP/100-00000016”, “0?Set(CALLERPRES()=)”) in new stack
– Executing [[email protected]:2] ExecIf(“SIP/100-00000016”, “0?Set(REALCALLERIDNUM=100)”) in new stack
– Executing [[email protected]:3] GotoIf(“SIP/100-00000016”, “1?normcid”) in new stack
– Goto (macro-outbound-callerid,s,6)
– Executing [[email protected]:6] Set(“SIP/100-00000016”, “USEROUTCID=”) in new stack
– Executing [[email protected]:7] Set(“SIP/100-00000016”, “EMERGENCYCID=”) in new stack
– Executing [[email protected]:8] Set(“SIP/100-00000016”, “TRUNKOUTCID=”) in new stack
– Executing [[email protected]:9] GotoIf(“SIP/100-00000016”, “1?trunkcid”) in new stack
– Goto (macro-outbound-callerid,s,12)
– Executing [[email protected]:12] ExecIf(“SIP/100-00000016”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [[email protected]:13] ExecIf(“SIP/100-00000016”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [[email protected]:14] ExecIf(“SIP/100-00000016”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [[email protected]:15] ExecIf(“SIP/100-00000016”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
– Executing [[email protected]:12] GosubIf(“SIP/100-00000016”, “0?sub-flp-1,s,1()”) in new stack
– Executing [[email protected]:13] Set(“SIP/100-00000016”, “OUTNUM=0034955989089”) in new stack
– Executing [[email protected]:14] Set(“SIP/100-00000016”, “custom=SIP/Fonworld”) in new stack
– Executing [[email protected]:15] ExecIf(“SIP/100-00000016”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))”) in new stack
– Executing [[email protected]:16] ExecIf(“SIP/100-00000016”, “0?Set(DIAL_TRUNK_OPTIONS=M(confirm))”) in new stack
– Executing [[email protected]:17] Macro(“SIP/100-00000016”, “dialout-trunk-predial-hook,”) in new stack
– Executing [[email protected]:1] MacroExit(“SIP/100-00000016”, “”) in new stack
– Executing [[email protected]:18] GotoIf(“SIP/100-00000016”, “0?bypass,1”) in new stack
– Executing [[email protected]:19] ExecIf(“SIP/100-00000016”, “1?Set(CONNECTEDLINE(num,i)=0034955989089)”) in new stack
– Executing [[email protected]:20] ExecIf(“SIP/100-00000016”, “1?Set(CONNECTEDLINE(name,i)=CID:100)”) in new stack
– Executing [[email protected]:21] GotoIf(“SIP/100-00000016”, “0?customtrunk”) in new stack
– Executing [[email protected]:22] Dial(“SIP/100-00000016”, “SIP/Fonworld/0034955989089,300,”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/Fonworld/0034955989089
[2012-06-15 09:51:11] WARNING[3388]: chan_sip.c:20581 handle_response_invite: Received response: “Forbidden” from ‘“Rafa Ramos” sip:[email protected];tag=as50ad7342’
== Everyone is busy/congested at this time (1:0/1/0)
– Executing [[email protected]:23] NoOp(“SIP/100-00000016”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34”) in new stack
– Executing [[email protected]:24] Goto(“SIP/100-00000016”, “s-CONGESTION,1”) in new stack
– Goto (macro-dialout-trunk,s-CONGESTION,1)
– Executing [[email protected]:1] Set(“SIP/100-00000016”, “RC=34”) in new stack
– Executing [[email protected]:2] Goto(“SIP/100-00000016”, “34,1”) in new stack
– Goto (macro-dialout-trunk,34,1)
– Executing [[email protected]:1] Goto(“SIP/100-00000016”, “continue,1”) in new stack
– Goto (macro-dialout-trunk,continue,1)
– Executing [[email protected]:1] GotoIf(“SIP/100-00000016”, “1?noreport”) in new stack
– Goto (macro-dialout-trunk,continue,3)
– Executing [[email protected]:3] NoOp(“SIP/100-00000016”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 34 - failing through to other trunks”) in new stack
– Executing [[email protected]:4] Set(“SIP/100-00000016”, “CALLERID(number)=100”) in new stack
– Executing [[email protected]:5] Macro(“SIP/100-00000016”, “outisbusy,”) in new stack
– Executing [[email protected]:1] Progress(“SIP/100-00000016”, “”) in new stack
– Executing [[email protected]:2] Playback(“SIP/100-00000016”, “all-circuits-busy-now,noanswer”) in new stack
– <SIP/100-00000016> Playing ‘all-circuits-busy-now.gsm’ (language ‘es’)
– Executing [[email protected]:3] Playback(“SIP/100-00000016”, “pls-try-call-later,noanswer”) in new stack
– <SIP/100-00000016> Playing ‘pls-try-call-later.gsm’ (language ‘es’)
– Executing [[email protected]:4] Macro(“SIP/100-00000016”, “hangupcall”) in new stack
– Executing [[email protected]:1] GotoIf(“SIP/100-00000016”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [[email protected]:3] ExecIf(“SIP/100-00000016”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [[email protected]:4] Hangup(“SIP/100-00000016”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/100-00000016’ in macro ‘hangupcall’
== Spawn extension (macro-outisbusy, s, 4) exited non-zero on ‘SIP/100-00000016’ in macro ‘outisbusy’
== Spawn extension (from-internal, 0034955989089, 5) exited non-zero on ‘SIP/100-00000016’
– Executing [[email protected]:1] Hangup(“SIP/100-00000016”, “”) in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/100-00000016’

If a want to call to Spain: 00 34 955 98 67 34, What do I have to put in Dial Patterns in Trunk and Outbound Routes?

A lot of thanks.