Hello,
Sorry for my bad english I am from latin-america… well the ponit is that Ihave already 2 distro free pbx up,Icreadted extension I can do and get calls,the problem is when I try to create trunks between 2 PBX.I search and found inf here also a I did everything i read. but there is a mesage “tehservic is busy now please try to call later” something like that, mi server´s ip address are
- server one : 192.168.1.253… (extensions 6001 to 6009)
- server two : 192.168.2.253… (extension 3001 to 3009)
please help me,I thing the wrong is the outbound route in the part of dial patterns.
thanks.
1 - No shirt no service
2 - You need to tell us how your system is configured
I am so sorry,I am new in this,but I have much interest in this,well my System is distro free pbx,I already install one server and I cloned that one so I have 2 servers…(that cold be the problem?)…
Server One: ip address 192.168.1.253 netmask 255.255.255.0 gw.192.168.1.254
Extensions are 6001 to 6009 (do you need more inf about this?..
Server two:ip address 192.168.2.253 netmask 255.255.255.0 gw.192.168.2.254
Extensions are 3001 to 3009
Trunk:I did it like this
-Server1
Trunk name: trunksip
Outgoing setting
Trunk name:Server2
host:192.168.2.253
username:cali_dmn
fromuser:cali_dmn
secret:xxx
type=peer
qualify=yes
Incoming
user context:3001
secret=xxx
type=user
context=from-trunk
-Server2
Trunk name: trunksip
Outgoing setting
Trunk name:Server1
host:192.168.1.253
username:cali_dmn
fromuser:cali_dmn
secret:xxx
type=peer
qualify=yes
Incoming
user context:6001
secret=xxx
type=user
context=from-trunk
note= all pass are the same because the server are cloned (Am I wrong?)
OUTBOUND ROUTE
Server1:
route name:Server2-dial-3xxx
dial pattern
(Pretend)+Prefix| [3xxx / ID caller] --> (Ithink here is the worng)
Trunk secuence
0=trunksip
Server2:
route name:Server1-dial-6xxx
dial pattern
(Pretend)+Prefix| [6xxx / ID caller] --> (Ithink here is the worng)
Trunk secuence
0=trunksip
Is the inf.that you need?
thanks for your help.