Trouble using Sangoma 6 to 7 upgrade tool

[Bradbpw]

@Marbled

OK, let’s see what this is about…

Does the following command shows a looooooot (no need to paste it all if it does, only paste the last few lines) of HTML and Javascript?

wget -qO- www.freepbx.org

Yep, it shows a loooooot! Here is the last few lines

> <!-------------------------------------Tracking Code to manage conversion in Pardot------------------------------------------->
> <script type="text/javascript">
> piAId = '13492';
> piCId = '67406';

> (function() {
> function async_load(){
> var s = document.createElement('script'); s.type = 'text/javascript';
> s.src = ('https:' == document.location.protocol ? 'https://pi' : 'http://cdn') + '.pardot.com/pd.js';
> var c = document.getElementsByTagName('script')[0]; c.parentNode.insertBefore(s, c);
> }
> if(window.attachEvent) { window.attachEvent('onload', async_load); }
> else { window.addEventListener('load', async_load, false); }
> })();
> </script>
> <!-------------------------------------END Tracking Code to manage conversion in Pardot------------------------------------------->

@Marbled

I doubt that this is your problem but just in case can you type

chkconfig --list | grep wanrouter
chkconfig wanrouter off

[root@localhost ~]# chkconfig --list | grep wanrouter

Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.

  If you want to list systemd services use 'systemctl list-unit-files'.
  To see services enabled on particular target use
  'systemctl list-dependencies [target]'.

wanrouter 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@localhost ~]# chkconfig wanrouter off
[root@localhost ~]#

@Marbled

Can you also issue a

route

[root@localhost ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default router.asus.com 0.0.0.0 UG 0 0 0 eth0
link-local 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
[root@localhost ~]#

@Marbled

I do have one small question left…

Is there a firewall in front of that PBX or were you using the FreePBX one?

I do have a firewall on the router the PBX is plugged into. I attempted to disable the firewall on my router. Got this output.

[root@localhost ~]# mv /var/run/post_sngupdate /var/run/post_sngupdate.old && /usr/sbin/post_upgrade
/usr/sbin/post_upgrade: line 39: RPMINFORMATION: command not found
######### Running distro upgrade #########
######### Starting post_upgrade on Fri Oct 20 14:43:20 CDT 2017 #########
mv: ‘/etc/sangoma/license-14408872.zl’ and ‘/etc/schmooze/license-14408872.zl’ are the same file
mv: ‘/etc/sangoma/pbx-brand’ and ‘/etc/schmooze/pbx-brand’ are the same file
mv: ‘/etc/sangoma/pbx-failsafe’ and ‘/etc/schmooze/pbx-failsafe’ are the same file
mv: ‘/etc/sangoma/pbxid’ and ‘/etc/schmooze/pbxid’ are the same file
mv: ‘/etc/sangoma/pbx-version’ and ‘/etc/schmooze/pbx-version’ are the same file
mv: ‘/etc/sangoma/schmooze.zl’ and ‘/etc/schmooze/schmooze.zl’ are the same file
######### Backing up yum configuration #########
######### Removing un-needed repofiles #########
######### Removing epel #########
######### Fixing /etc/my.cnf #########
######### Enabling and starting mariadb #########
######### Running mysql_upgrade #########
######### Restarting Mariadb #########
######### Attempting to check for internet connectivity #########
######### Aborting as we are unable to detect an internet connection. After confirming your internet connectivity, please run mv /var/run/post_sngupdate /var/run/post_sngupdate.old && /usr/sbin/post_upgrade #########
[root@localhost ~]#

@Marbled

At first I thought that this has similarities with a problem I had with my own upgrade but what you said next made me realize it was not that…

@Marbled

SSH is port 22 TCP, not 23… Port 23 TCP is Telnet, an old plain text way of accessing the console…

Port 23 TCP (Telnet) is, fortunately, not opened…

It this is what you actually forwarded it will definitely not work…

Yep, brainfart. it does work on port 22. I can SSH from WAN.

@Marbled

Am I to understand that the yum dependencies did end up being resolved correctly?

I’m not sure. I get some errors when running “yum update”. The output is pretty long, here is a sample of some of the errors.

…
—> Package speex.i686 0:1.2-0.12.rc1.1.el6 will be updated
→ Processing Dependency: speex = 1.2-0.12.rc1.1.el6 for package: speex-devel-1.2-0.12.rc1.1.el6.x86_64
→ Finished Dependency Resolution
Error: Package: libsepol-devel-2.0.41-4.el6.x86_64 (@base/6)
Requires: libsepol = 2.0.41-4.el6
Removing: libsepol-2.0.41-4.el6.i686 (installed)
libsepol = 2.0.41-4.el6
Updated By: libsepol-2.5-6.el7.i686 (sng-base)
libsepol = 2.5-6.el7
Error: Package: speex-devel-1.2-0.12.rc1.1.el6.x86_64 (@base/6)
Requires: speex = 1.2-0.12.rc1.1.el6
Removing: speex-1.2-0.12.rc1.1.el6.i686 (installed)
speex = 1.2-0.12.rc1.1.el6
Updated By: speex-1.2-0.19.rc1.el7.i686 (sng-base)
speex = 1.2-0.19.rc1.el7
Error: Package: alsa-lib-devel-1.0.22-3.el6.x86_64 (@anaconda-PBX-201403180405.x86_64/6.5)
Requires: alsa-lib = 1.0.22-3.el6
Removing: alsa-lib-1.0.22-3.el6.i686 (installed)
alsa-lib = 1.0.22-3.el6
Updated By: alsa-lib-1.1.3-3.el7.i686 (sng-base)
alsa-lib = 1.1.3-3.el7
Installed: alsa-lib-1.1.1-1.el7.x86_64 (installed)
alsa-lib = 1.1.1-1.el7
Error: Package: libtiff-devel-3.9.4-10.el6_5.x86_64 (@anaconda-PBX-201403180405.x86_64/6.5)
Requires: libtiff = 3.9.4-10.el6_5
Removing: libtiff-3.9.4-10.el6_5.i686 (installed)
libtiff = 3.9.4-10.el6_5
Updated By: libtiff-4.0.3-27.el7_3.i686 (sng-base)
libtiff = 4.0.3-27.el7_3
You could try using --skip-broken to work around the problem
** Found 271 pre-existing rpmdb problem(s), ‘yum check’ output follows:
alsa-lib-1.1.1-1.el7.x86_64 is a duplicate with alsa-lib-1.0.22-3.el6.i686
alsa-lib-1.1.3-3.el7.x86_64 is a duplicate with alsa-lib-1.1.1-1.el7.x86_64
alsa-lib-devel-1.1.3-3.el7.x86_64 is a duplicate with alsa-lib-devel-1.0.22-3.el6.x86_64
apr-1.4.8-3.el7.x86_64 is a duplicate with apr-1.3.9-5.el6_2.i686
apr-util-1.3.9-3.el6_0.1.i686 has missing requires of libdb-4.7.so
apr-util-1.5.2-6.el7.x86_64 is a duplicate with apr-util-1.3.9-3.el6_0.1.i686
asterisk13-13.17.1-1.shmz65.1.179.x86_64 has missing requires of asterisk-sounds-core-en-gsm
asterisk13-addons-mysql-13.17.1-1.shmz65.1.179.x86_64 has missing requires of libmysqlclient.so.16()(64bit)
asterisk13-addons-mysql-13.17.1-1.shmz65.1.179.x86_64 has missing requires of libmysqlclient.so.16(libmysqlclient_16)(64bit)
asterisk13-core-13.17.1-1.shmz65.1.179.x86_64 has missing requires of libical.so.0()(64bit)
asterisk13-core-13.17.1-1.shmz65.1.179.x86_64 has missing requires of libtiff.so.3()(64bit)
atk-2.22.0-3.el7.x86_64 is a duplicate with atk-1.30.0-1.el6.x86_64
1:audiofile-0.3.6-4.el7.x86_64 is a duplicate with 1:audiofile-0.2.6-11.1.el6.x86_64
1:audiofile-devel-0.3.6-4.el7.x86_64 is a duplicate with 1:audiofile-devel-0.2.6-11.1.el6.x86_64
audit-libs-2.7.6-3.el7.x86_64 is a duplicate with audit-libs-2.6.5-3.el7_3.1.x86_64
bacula-client-5.0.0-12.el6.x86_64 has missing requires of libpython2.6.so.1.0()(64bit)
bash-4.2.46-29.el7_4.x86_64 is a duplicate with bash-4.2.46-21.el7_3.x86_64
32:bind-license-9.9.4-51.el7.noarch is a duplicate with 32:bind-license-9.9.4-38.el7_3.2.noarch
binutils-2.25.1-32.base.el7_4.1.x86_64 is a duplicate with binutils-2.25.1-22.base.el7.x86_64
bluez-libs-5.44-4.el7_4.x86_64 is a duplicate with bluez-libs-5.41-1.el7.x86_64
boost-system-1.53.0-27.el7.x86_64 is a duplicate with boost-system-1.53.0-26.el7.x86_64
ca-certificates-2017.2.14-71.el7.noarch is a duplicate with ca-certificates-2015.2.6-73.el7.noarch
chkconfig-1.7.4-1.el7.x86_64 is a duplicate with chkconfig-1.7.2-1.el7.x86_64
cloog-ppl-0.15.7-1.2.el6.x86_64 has missing requires of libgmp.so.3()(64bit)
cpio-2.11-25.el7_4.x86_64 is a duplicate with cpio-2.11-24.el7.x86_64
cpp-4.8.5-16.el7.x86_64 is a duplicate with cpp-4.8.5-11.el7.x86_64
cronie-anacron-1.4.4-12.el6.x86_64 has missing requires of cronie = (‘0’, ‘1.4.4’, ‘12.el6’)
…
…
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__class_create) = (‘0’, ‘0xa2654165’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__init_waitqueue_head) = (‘0’, ‘0xffc7c184’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__kmalloc) = (‘0’, ‘0x5a34a45c’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__mutex_init) = (‘0’, ‘0x4bf79039’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__per_cpu_offset) = (‘0’, ‘0x32047ad5’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__register_chrdev) = (‘0’, ‘0xfa0d49c7’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__request_module) = (‘0’, ‘0xe90dcae0’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__tracepoint_module_get) = (‘0’, ‘0xacdeb154’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(__wake_up) = (‘0’, ‘0x642e54ac’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(_ctype) = (‘0’, ‘0x8d3894f2’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(_dev_info) = (‘0’, ‘0x9b3277f3’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(_spin_lock) = (‘0’, ‘0x973873ab’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(_spin_lock_irqsave) = (‘0’, ‘0x712aa29b’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(_spin_unlock_irqrestore) = (‘0’, ‘0x4b07e779’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(add_timer) = (‘0’, ‘0x46085e4f’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(add_uevent_var) = (‘0’, ‘0xb9eb3aa9’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(bus_register) = (‘0’, ‘0x350759b7’, None)
kmod-dahdi-linux-2.11.1-22_centos6.2.6.32_642.6.2.el6.x86_64.x86_64 has missing requires of kernel(bus_unregister) = (‘0’, ‘0xaa7569fd’, None)
…

Thanks!