Just setup a new PBX system with a brand new A101DE card plugged into it. The LAN has activity while being booted through BIOS, once the OS loads it has 0 activity for like 2 minutes until the first The H100 slave has lost its framing on the bus! error appears, once that appears the LAN turns on and the system is connected to the network. However that error keeps popping up sparatically while also giving a The CT_C8_A clock behavior does not conform to the H.100 spec! error less often. I tried adding HWEC_CLKSRC = YES to /etc/wanpipe/wanpipe1.conf using sudo nano, however once I reboot the system the changes I made to the file are reverted. Anybody know how to resolve this?
Are you configuring via the FreePBX Module?
