The calling party does not get the ringing tone

I’am running Trixbox with FreeBpx 2.3.1.3, simpel setup throug GUI only. 3 sip phones One sip trunk to my swedish sip provider (Rixport80.se) one ring group with all 3 phones.

Every thing works great, exept the calling party don’t get any ringing tone.
I have double check the “Asterisk Dial command options” r

Is my problem in the trunk settings ?

Outgoing Settings
Peer Details:

allow=alaw&gsm
disallow=all
dtmfmode=rfc2833
fromuser=090123456
host=cx-cust-sth01.rixtelecom.se
insecure=very
qualify=yes
secret=password
type=peer
username=0910123456

Incoming Settings
User Context: 090123456

User Details:

context=from-trunk
fromuser=090123456
insecure=very
secret=password
type=user

Register String
090123456:[email protected]/090123456

That the User Context is your username feels a bit odd…

The trunk name is rix-090123456

Yes the help for User Context says “This is most often the accound name”

/ Jonas

In Outgoing Settings you added:

context=from-trunk

Same problem.

Sounds to specific to the provider for a dolt like me to be of much help.

I’am getting close, if i set Inbound Route, set destination, Extension directly to an extension it works and the calling party get the ringing tone.
The problem seems to be when i route all incomming calls to my ring group shuldn’t it work if I list all my extensions
and select Ring strategy “Ringall”

Problem solved

http://www.trixbox.org/forums/trixbox-forums/open-discussion/calling-party-dont-get-any-ringing-tone-when-i-use-ringall