The hardware information that the Sys Info module is showing is somehow incorrect. Correct me if I am wrong. The model shown is correct which is quad Core @ 2.4Ghz. But the CPU speed shown is only 1.6Ghz. Following is the information shown on the Sys Info module on my Freepbx installation:
Processors 4
Model Intel® Core™2 Quad CPU Q6600 @ 2.40GHz @ 25°C - Note here: 2.4Ghz.
CPU Speed 1.6 GHz - Here it is only 1.6 Ghz
Cache Size 4.00 MB
System Bogomips 19200.27
PCI Devices
- Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller
- Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
- IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
- ISA bridge: Intel Corporation 82801IR
- PCI bridge: Intel Corporation 82801 PCI Bridge
- (3x) PCI bridge: Intel Corporation 82801I
- PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port
- RAID bus controller: Intel Corporation 82801 SATA RAID Controller
- SMBus: Intel Corporation 82801I
- VGA compatible controller: nVidia Corporation GeForce 8600 GT
IDE Devices - hde: HL-DT-ST DVDRAM GSA-H10A
SCSI Devices - ATA ST3250410AS (Direct-Access)
- ATA ST3250410AS (Direct-Access)
USB Devices none
Am I missing something here? Thank you.