Hi all,
Please help. I am using pfigo as our sip provider. Registration is fine after creating the trunk. BUt unable to make calls through that SIP trunk below is the log I am getting.
Please advice
[2013-02-21 15:13:04] VERBOSE[3505] netsock2.c: == Using SIP RTP TOS bits 184
[2013-02-21 15:13:04] VERBOSE[3505] netsock2.c: == Using SIP RTP CoS mark 5
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:1] Macro(“SIP/134-00000005”, “user-callerid,LIMIT,”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/134-00000005”, “AMPUSER=134”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:2] GotoIf(“SIP/134-00000005”, “0?report”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:3] ExecIf(“SIP/134-00000005”, “1?Set(REALCALLERIDNUM=134)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:4] Set(“SIP/134-00000005”, “AMPUSER=134”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/134-00000005”, “AMPUSERCIDNAME=Cino Jose”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/134-00000005”, “0?report”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/134-00000005”, “AMPUSERCID=134”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/134-00000005”, “CALLERID(all)=“Cino Jose” <134>”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:9] GotoIf(“SIP/134-00000005”, “0?limit”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:10] ExecIf(“SIP/134-00000005”, “1?Set(GROUP(concurrency_limit)=134)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:11] GosubIf(“SIP/134-00000005”, “7?sub-ccss,s,1(from-internal,63536682)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/134-00000005”, “0?Return()”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/134-00000005”, “CCSS_SETUP=TRUE”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/134-00000005”, “0?monitor_config,1(from-internal,63536682):monitor_default,1(from-internal,63536682)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/134-00000005”, “0?is_exten”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/134-00000005”, “FALSE”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:12] ExecIf(“SIP/134-00000005”, “0?Set(CHANNEL(language)=)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:13] GotoIf(“SIP/134-00000005”, “1?continue”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (macro-user-callerid,s,26)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/134-00000005”, “CALLERID(number)=134”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/134-00000005”, “CALLERID(name)=Cino Jose”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-user-callerid:28] Set(“SIP/134-00000005”, “CHANNEL(language)=en”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:2] Set(“SIP/134-00000005”, “MOHCLASS=default”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:3] Set(“SIP/134-00000005”, “_NODEST=”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:4] Gosub(“SIP/134-00000005”, “sub-record-check,s,1(out,63536682,)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:1] GotoIf(“SIP/134-00000005”, “1?check”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (sub-record-check,s,6)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:6] Set(“SIP/134-00000005”, “__MON_FMT=wav”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:7] GotoIf(“SIP/134-00000005”, “1?next”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (sub-record-check,s,10)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:10] ExecIf(“SIP/134-00000005”, “0?Return()”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:11] GotoIf(“SIP/134-00000005”, “0?out,1”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:12] Set(“SIP/134-00000005”, “__REC_STATUS=INITIALIZED”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:13] ExecIf(“SIP/134-00000005”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/134-00000005”, “NOW=1361430784”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/134-00000005”, “__DAY=21”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/134-00000005”, “__MONTH=02”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/134-00000005”, “__YEAR=2013”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/134-00000005”, “__TIMESTR=20130221-151304”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/134-00000005”, “__FROMEXTEN=134”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/134-00000005”, “__CALLFILENAME=out-63536682-134-20130221-151304-1361430784.5”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-record-check:21] Goto(“SIP/134-00000005”, “out,1”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (sub-record-check,out,1)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [out@sub-record-check:1] ExecIf(“SIP/134-00000005”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [out@sub-record-check:2] GosubIf(“SIP/134-00000005”, “0?record,1(exten,63536682,134)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [out@sub-record-check:3] Return(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:5] Macro(“SIP/134-00000005”, “dialout-trunk,3,63536682,”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/134-00000005”, “DIAL_TRUNK=3”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/134-00000005”, “0?sub-pincheck,s,1()”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/134-00000005”, “0?disabletrunk,1”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/134-00000005”, “DIAL_NUMBER=63536682”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/134-00000005”, “DIAL_TRUNK_OPTIONS=tm”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/134-00000005”, “OUTBOUND_GROUP=OUT_3”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/134-00000005”, “1?nomax”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/134-00000005”, “0?skipoutcid”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/134-00000005”, “DIAL_TRUNK_OPTIONS=t”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/134-00000005”, “outbound-callerid,3”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/134-00000005”, “0?Set(CALLERPRES()=)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/134-00000005”, “0?Set(REALCALLERIDNUM=134)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/134-00000005”, “1?normcid”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/134-00000005”, “USEROUTCID=”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/134-00000005”, “EMERGENCYCID=”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/134-00000005”, “TRUNKOUTCID=pfingo”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/134-00000005”, “1?trunkcid”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/134-00000005”, “1?Set(CALLERID(all)=pfingo)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/134-00000005”, “0?Set(CALLERID(all)=)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/134-00000005”, “0?Set(CALLERID(all)=)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/134-00000005”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/134-00000005”, “1?sub-flp-3,s,1()”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@sub-flp-3:1] ExecIf(“SIP/134-00000005”, “1?Return()”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/134-00000005”, “OUTNUM=63536682”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/134-00000005”, “custom=SIP/pfingo”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/134-00000005”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)t)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/134-00000005”, “0?Set(DIAL_TRUNK_OPTIONS=tM(confirm))”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/134-00000005”, “dialout-trunk-predial-hook,”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/134-00000005”, “0?bypass,1”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/134-00000005”, “1?Set(CONNECTEDLINE(num,i)=63536682)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/134-00000005”, “1?Set(CONNECTEDLINE(name,i)=CID:)”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/134-00000005”, “0?customtrunk”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/134-00000005”, “SIP/pfingo/63536682,300,t”) in new stack
[2013-02-21 15:13:04] VERBOSE[5390] netsock2.c: == Using SIP RTP TOS bits 184
[2013-02-21 15:13:04] VERBOSE[5390] netsock2.c: == Using SIP RTP CoS mark 5
[2013-02-21 15:13:04] VERBOSE[5390] app_dial.c: – Called SIP/pfingo/63536682
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: – SIP/pfingo-00000006 is circuit-busy
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/134-00000005”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 0”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:24] Goto(“SIP/134-00000005”, “s-CONGESTION,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:1] Set(“SIP/134-00000005”, “RC=0”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:2] Goto(“SIP/134-00000005”, “0,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,0,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [0@macro-dialout-trunk:1] Goto(“SIP/134-00000005”, “continue,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:1] GotoIf(“SIP/134-00000005”, “1?noreport”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:3] NoOp(“SIP/134-00000005”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 0 - failing through to other trunks”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:4] Set(“SIP/134-00000005”, “CALLERID(number)=134”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:6] Macro(“SIP/134-00000005”, “dialout-trunk,2,63536682,”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/134-00000005”, “DIAL_TRUNK=2”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/134-00000005”, “0?sub-pincheck,s,1()”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/134-00000005”, “0?disabletrunk,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/134-00000005”, “DIAL_NUMBER=63536682”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/134-00000005”, “DIAL_TRUNK_OPTIONS=tm”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/134-00000005”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/134-00000005”, “1?nomax”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/134-00000005”, “0?skipoutcid”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/134-00000005”, “DIAL_TRUNK_OPTIONS=t”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/134-00000005”, “outbound-callerid,2”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/134-00000005”, “0?Set(CALLERPRES()=)”) in new stack
[2013-02-21 15:13:36] WARNING[3505] chan_sip.c: Retransmission timeout reached on transmission [email protected]:5060 for seqno 102 (Critical Request) – See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 32001ms with no response
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/134-00000005”, “0?Set(REALCALLERIDNUM=134)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/134-00000005”, “1?normcid”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/134-00000005”, “USEROUTCID=”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/134-00000005”, “EMERGENCYCID=”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/134-00000005”, “TRUNKOUTCID=UBS Library Services”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/134-00000005”, “1?trunkcid”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/134-00000005”, “1?Set(CALLERID(all)=UBS Library Services)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/134-00000005”, “0?Set(CALLERID(all)=)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/134-00000005”, “0?Set(CALLERID(all)=)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/134-00000005”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/134-00000005”, “0?sub-flp-2,s,1()”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/134-00000005”, “OUTNUM=63536682”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/134-00000005”, “custom=DAHDI/g0”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/134-00000005”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)t)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/134-00000005”, “0?Set(DIAL_TRUNK_OPTIONS=tM(confirm))”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/134-00000005”, “dialout-trunk-predial-hook,”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/134-00000005”, “0?bypass,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/134-00000005”, “1?Set(CONNECTEDLINE(num,i)=63536682)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/134-00000005”, “1?Set(CONNECTEDLINE(name,i)=CID:)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/134-00000005”, “0?customtrunk”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/134-00000005”, “DAHDI/g0/63536682,300,t”) in new stack
[2013-02-21 15:13:36] WARNING[5390] app_dial.c: Unable to create channel of type ‘DAHDI’ (cause 0 - Unknown)
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/134-00000005”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 0”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:24] Goto(“SIP/134-00000005”, “s-CHANUNAVAIL,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set(“SIP/134-00000005”, “RC=0”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto(“SIP/134-00000005”, “0,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,0,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [0@macro-dialout-trunk:1] Goto(“SIP/134-00000005”, “continue,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:1] GotoIf(“SIP/134-00000005”, “1?noreport”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:3] NoOp(“SIP/134-00000005”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 0 - failing through to other trunks”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:4] Set(“SIP/134-00000005”, “CALLERID(number)=134”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:7] Macro(“SIP/134-00000005”, “dialout-trunk,1,63536682,”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/134-00000005”, “DIAL_TRUNK=1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/134-00000005”, “0?sub-pincheck,s,1()”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/134-00000005”, “0?disabletrunk,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/134-00000005”, “DIAL_NUMBER=63536682”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/134-00000005”, “DIAL_TRUNK_OPTIONS=tm”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/134-00000005”, “OUTBOUND_GROUP=OUT_1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/134-00000005”, “1?nomax”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/134-00000005”, “0?skipoutcid”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/134-00000005”, “DIAL_TRUNK_OPTIONS=t”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/134-00000005”, “outbound-callerid,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/134-00000005”, “0?Set(CALLERPRES()=)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/134-00000005”, “0?Set(REALCALLERIDNUM=134)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/134-00000005”, “1?normcid”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/134-00000005”, “USEROUTCID=”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/134-00000005”, “EMERGENCYCID=”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/134-00000005”, “TRUNKOUTCID=3ports”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/134-00000005”, “1?trunkcid”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/134-00000005”, “1?Set(CALLERID(all)=3ports)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/134-00000005”, “0?Set(CALLERID(all)=)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/134-00000005”, “0?Set(CALLERID(all)=)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/134-00000005”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/134-00000005”, “0?sub-flp-1,s,1()”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/134-00000005”, “OUTNUM=63536682”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/134-00000005”, “custom=DAHDI/g1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/134-00000005”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)t)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/134-00000005”, “0?Set(DIAL_TRUNK_OPTIONS=tM(confirm))”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/134-00000005”, “dialout-trunk-predial-hook,”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/134-00000005”, “0?bypass,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/134-00000005”, “1?Set(CONNECTEDLINE(num,i)=63536682)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/134-00000005”, “1?Set(CONNECTEDLINE(name,i)=CID:)”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/134-00000005”, “0?customtrunk”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/134-00000005”, “DAHDI/g1/63536682,300,t”) in new stack
[2013-02-21 15:13:36] WARNING[5390] app_dial.c: Unable to create channel of type ‘DAHDI’ (cause 34 - Circuit/channel congestion)
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/134-00000005”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:24] Goto(“SIP/134-00000005”, “s-CONGESTION,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:1] Set(“SIP/134-00000005”, “RC=34”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:2] Goto(“SIP/134-00000005”, “34,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,34,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [34@macro-dialout-trunk:1] Goto(“SIP/134-00000005”, “continue,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:1] GotoIf(“SIP/134-00000005”, “1?noreport”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:3] NoOp(“SIP/134-00000005”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 34 - failing through to other trunks”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [continue@macro-dialout-trunk:4] Set(“SIP/134-00000005”, “CALLERID(number)=134”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [63536682@from-internal:8] Macro(“SIP/134-00000005”, “outisbusy,”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outisbusy:1] Progress(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outisbusy:2] GotoIf(“SIP/134-00000005”, “0?emergency,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outisbusy:3] GotoIf(“SIP/134-00000005”, “0?intracompany,1”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-outisbusy:4] Playback(“SIP/134-00000005”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[2013-02-21 15:13:36] VERBOSE[5390] file.c: – <SIP/134-00000005> Playing ‘all-circuits-busy-now.gsm’ (language ‘en’)
[2013-02-21 15:13:37] VERBOSE[5390] file.c: – <SIP/134-00000005> Playing ‘pls-try-call-later.gsm’ (language ‘en’)
[2013-02-21 15:13:39] VERBOSE[5390] app_macro.c: == Spawn extension (macro-outisbusy, s, 4) exited non-zero on ‘SIP/134-00000005’ in macro ‘outisbusy’
[2013-02-21 15:13:39] VERBOSE[5390] pbx.c: == Spawn extension (from-internal, 63536682, 8) exited non-zero on ‘SIP/134-00000005’
[2013-02-21 15:13:39] VERBOSE[5390] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/134-00000005”, “”) in new stack
[2013-02-21 15:13:39] VERBOSE[5390] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/134-00000005’
I doubt your provider accepts all of those CODEC’s and you probably don’t have a g.729 license on your Asterisk system so if they choose that CODEC you would decline the call.
But that’s not happening, they are declining the call.
The carrier won’t help you?
Guys, I know English is not your first language but advice is a noun, advise is a verb, so it would be “please advise” or “any more advice”
Here is some advice:
You log says:
[quote]SIP/pfingo-00000006 is circuit-busy
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)[/quote]
So you sent your carrier the number: 63536682 they refused the call. Either they did not like the number, the CODEC, or some AAA parameter. Your carrier needs to tell you why they refused the call. We have know way of knowing.
Thank you for your comment
I do have dahdi lines, its all working fine. Right now i am trying to isolate to sip. so that that trunk is working fine.
I checked with pfingo. they said the format is correct.
please advice
You were right the format was wrong.It should be 006563536682. This works when I call using a desktop pfingo application. But though PBX not working :(.
I am allowing all the codec in my SIP setting , can’t really figure out the specific reason
allowed codecs g726,Ipc10,adpcm,speex,g722,siren7,g726aal2,siren14,g723,slin,alaw,gsm,g729,ilbc,ulaw.
Thanks in advance
open port 5060 on your firwall
Hi Thanks for the comment.
I have done a port forwarding on my router 5060 to server 5060.
There is no issue in registering SIP. That means if i enter wrong password for SIP , I can see in log retires. If correct then no logs. Hopefully registered successfully.
But i am still getting the same logs as above when i call out.
please help.
Don’t you need to put your password in the SIP secret?
I am triying to use only ulaw and alaw codec instaed of all.
please see sip show show peer trunkname
http://pastie.org/6419070
and now I am getting this error
[2013-03-08 16:22:56] VERBOSE[9260] app_dial.c: – Called SIP/trunk_4/006590875342
[2013-03-08 16:22:56] NOTICE[9137] chan_sip.c: Failed to authenticate on INVITE to ‘“Cino Jose” sip:[email protected];tag=as055389bc’
[2013-03-08 16:22:56] VERBOSE[9260] app_dial.c: – SIP/trunk_4-00000003 is circuit-busy
Apparently pfingo doesn’t like you calling 63536682:-
[2013-02-21 15:13:04] VERBOSE[5390] app_dial.c: – Called SIP/pfingo/63536682
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: – SIP/pfingo-00000006 is circuit-busy
[2013-02-21 15:13:36] VERBOSE[5390] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[2013-02-21 15:13:36] VERBOSE[5390] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/134-00000005”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 0”) in new stack
Check your outbound routes and trunk for how to format to what they accept or call tech support at pfingo, with that clip and ask why they ended that call with a call clearing code of 0 which is not informative.normal
p.s.
63536682
none of your dahdi lines are working either, do you have any?
I did specified the password in the trunk setting, there is no issue in registering.
You are right, I missed that. Well something isn’t matching with your provider
Sometimes SIP providers reject calls when you send a Caller ID not in your DID list from them.
You might look there.
I forgot to mention, that some SIP providers will let you send any outbound caller id if you call them, ask them, jump through their qualifying hoops so they are certain you arent a spammer 
Thank you petersonz,
when I enable debugging, this is what I am getting while I call out.I am not sure how to read this,
[2013-03-11 10:01:29] VERBOSE[3521] chan_sip.c: Retransmitting #2 (no NAT) to 203.117.31.243:5060:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 175.156.195.134:5060;branch=z9hG4bK443c9413
Max-Forwards: 70
From: “Cino Jose” >sip:[email protected]<;tag=as3fe5c8f3
To: >:[email protected]<
Contact: >sip:[email protected]:5060<
Call-ID: [email protected]:5060
CSeq: 102 INVITE
User-Agent: FPBX-2.10.1(1.8.11)
Date: Mon, 11 Mar 2013 02:01:28 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 660
v=0
o=root 1154735475 1154735475 IN IP4 175.156.195.134
s=Asterisk PBX 1.8.11-cert1
c=IN IP4 175.156.195.134
b=CT:384
t=0 0
m=audio 12138 RTP/AVP 8 0 7 5 9 111 10 3 97 112 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:7 LPC/8000
a=rtpmap:5 DVI4/8000
a=rtpmap:9 G722/8000
a=rtpmap:111 G726-32/8000
a=rtpmap:10 L16/8000
a=rtpmap:3 GSM/8000
a=rtpmap:97 iLBC/8000
a=fmtp:97 mode=30
a=rtpmap:112 AAL2-G726-32/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=sendrecv
m=video 14782 RTP/AVP 31 34 98 99
a=rtpmap:31 H261/90000
a=rtpmap:34 H263/90000
a=rtpmap:98 h263-1998/90000
a=rtpmap:99 H264/90000
a=sendrecv
My trunk registered with my SIP with no errors.
But not sure why call can’t go out.
Just figured out, Problem was NAT, once I enabled NAT and added fromuser=username
fromdomain=sip.pfingo.com
nat=yes
into the sip setting, call works fine.
Thanks for all the support
cheers!!!