Sangoma A200 isn't showing up in DAHDI Config

Installed new Sangoma A200 and while the hardware is showing, I’m not getting any DAHDI config info for the FXO and FXS ports so I can start configuring the POTS lines. I did reinstall the DAHDI module just in case that was a factor. But running dahdi commands is giving me command not found (which seems odd). Also, I didn’t download any wanpipe drivers-I’m assuming I don’t need to (as the wanpipe commands are there), but if so, where do I get them (the Sangoma Wiki is a page not found dead end for every link I looked at).

System 50
FreePBX 12.0.76.4
PBX FW: 6.12.65-32
DAHDI Module 2.11.53
-Run Wanpipe In DAHDI/DIGIUM Mode: Yes

[code] [root@localhost ~]# wanrouter hwprobe


Wanpipe Hardware Probe Info

1 . AFT-A200-SH : SLOT=0 : BUS=3 : IRQ=11 : CPU=A : PORT=PRI : HWEC=32 : V=13

Sangoma Card Count: A200=1

[root@localhost ~]# wanrouter status

Devices currently active:

Wanpipe Config:

Device name | Protocol Map | Adapter | IRQ | Slot/IO | If’s | CLK | Baud rate |

Wanrouter Status:

Device name | Protocol | Station | Status |

[root@localhost ~]# dahdi -vvv
-bash: dahdi: command not found
[root@localhost ~]# dahdi show channels
-bash: dahdi: command not found
[root@localhost ~]# amportal a dbug

Fetching FreePBX settings with gen_amp_conf.php…

trying to run as user asterisk:

[FPBXDBUGDISABLE] changed from previous value: [1] to new value: [0]

==> /var/log/asterisk/freepbx_dbug <==

==> /var/log/httpd/error_log <==
[Fri May 26 11:28:57 2017] [error] [client 10.37.1.114] PHP Strict Standards: Non-static method DB::isError() should not be called statically, assuming $this from incompatible context in /usr/share/pear/DB/common.php on line 1217, referer: http://10.37.2.10/admin/config.php
[Fri May 26 11:28:57 2017] [error] [client 10.37.1.114] PHP Strict Standards: Non-static method DB::isError() should not be called statically, assuming $this from incompatible context in /usr/share/pear/DB/common.php on line 1292, referer: http://10.37.2.10/admin/config.php
[Fri May 26 11:28:57 2017] [error] [client 10.37.1.114] PHP Strict Standards: Non-static method DB::isError() should not be called statically, assuming $this from incompatible context in /usr/share/pear/DB.php on line 1387, referer: http://10.37.2.10/admin/config.php
[Fri May 26 11:38:19 2017] [error] [client 10.37.1.114] PHP Strict Standards: Non-static method DB::isManip() should not be called statically, assuming $this from incompatible context in /usr/share/pear/DB/common.php on line 2195, referer: http://10.37.2.10/admin/config.php
[Fri May 26 11:38:19 2017] [error] [client 10.37.1.114] PHP Strict Standards: Non-static method DB::isError() should not be called statically in /var/www/html/admin/libraries/sql.functions.php on line 24, referer: http://10.37.2.10/admin/config.php
[Fri May 26 11:56:31 2017] [notice] caught SIGTERM, shutting down
[Fri May 26 11:58:52 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Fri May 26 11:58:52 2017] [notice] Digest: generating secret for digest authentication …
[Fri May 26 11:58:52 2017] [notice] Digest: done
[Fri May 26 11:58:56 2017] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.28 mod_ssl/2.2.15 OpenSSL/1.0.1e-fips configured – resuming normal operations

==> /var/log/asterisk/freepbx.log <==
[2017-May-26 12:42:36] [WARNING] (libraries/modulefunctions.legacy.php:7) - Depreciated Function module_getinfo detected in /var/www/html/admin/modules/cxpanel/functions.inc.php on line 52
[2017-May-26 12:42:36] [WARNING] (libraries/modulefunctions.legacy.php:7) - Depreciated Function module_getinfo detected in /var/www/html/admin/modules/cxpanel/functions.inc.php on line 61
[2017-May-26 12:42:37] [WARNING] (libraries/modulefunctions.legacy.php:7) - Depreciated Function module_getinfo detected in /var/www/html/admin/modules/versionupgrade/functions.inc.php on line 35
[2017-May-26 12:42:37] [PHP-WARNING] (/var/www/html/admin/libraries/BMO/GuiHooks.class.php:40) - Invalid argument supplied for foreach()
[2017-May-26 12:42:37] [PHP-WARNING] (/var/www/html/admin/libraries/BMO/GuiHooks.class.php:40) - Invalid argument supplied for foreach()
[2017-May-26 12:42:37] [WARNING] (libraries/modulefunctions.legacy.php:7) - Depreciated Function module_getinfo detected in /var/www/html/admin/libraries/featurecodes.functions.php on line 42
[2017-May-26 12:43:43] [INFO] (bin/freepbx_setting:42) - trying to run as user asterisk:
[2017-May-26 12:43:43] [INFO] (bin/freepbx_setting:43) -
[2017-May-26 12:43:43] [INFO] (bin/freepbx_setting:79) - [FPBXDBUGDISABLE] changed from previous value: [1] to new value: [0]
[2017-May-26 12:43:43] [INFO] (bin/freepbx_setting:80) -
^[[B^[[B ^C [/code]

Some additional info:

Ran wancfg_dahdi and after that wrapped up went back in but didn’t see anything new/different in DAHDI config.

[root@localhost ~]# dahdi_scan
[root@localhost ~]# dahdi_cfg -vvvvv
DAHDI Tools Version - 2.10.0.1

DAHDI Version: 2.10.0.1
Echo Canceller(s): 
Configuration
======================


Channel map:


0 channels to configure.

[root@localhost ~]# service dahdi status
[root@localhost ~]#

Try running setup-sangoma. You are on a really old version before we had full GUI integration done. Also highly recommend upgrading your system to 10.13.66 in the near future.