Hi Freepbx support
I am using freepbx 2.5.2.1
i have created three extensions 52214 ,52215 ,51214
and created a ring group with id 52216.
in that ring group 52214 and 52215 are added as ringall option .
if i dial this ring group no from 51214 , i am getting invalid no.
if i point my did to this ingroup its works.but not working from the internal extensions
my cli log
Executing [52216@from-internal:1] Macro(“SIP/51214-b7601d88”, “user-callerid|”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/51214-b7601d88”, “AMPUSER=51214”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/51214-b7601d88”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/51214-b7601d88”, “1|Set|REALCALLERIDNUM=51214”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/51214-b7601d88”, “AMPUSER=51214”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/51214-b7601d88”, “AMPUSERCIDNAME=51214”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/51214-b7601d88”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/51214-b7601d88”, “AMPUSERCID=51214”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/51214-b7601d88”, “CALLERID(all)=“51214” <51214>”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“SIP/51214-b7601d88”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/51214-b7601d88”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:11] GotoIf(“SIP/51214-b7601d88”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,18)
– Executing [s@macro-user-callerid:18] NoOp(“SIP/51214-b7601d88”, “Using CallerID “51214” <51214>”) in new stack
– Executing [52216@from-internal:2] Set(“SIP/51214-b7601d88”, “result=OK”) in new stack
– Executing [52216@from-internal:3] NoOp(“SIP/51214-b7601d88”, “Results: OK”) in new stack
– Executing [52216@from-internal:4] GotoIf(“SIP/51214-b7601d88”, “1?OK”) in new stack
– Goto (from-internal,52216,6)
– Executing [52216@from-internal:6] Goto(“SIP/51214-b7601d88”, “outbound-allroutes||1”) in new stack
– Goto (outbound-allroutes,52216,1)
pbx*CLI>