Re:help please

hey folks here is my setup i have free pbx installed and making calls internally works just fine using softphones made from old ipod’s not the problem is that when i take my IPHONE outside of my lan and use 3G i can send calls out to the various extension numbers such as 101,102,103 and so on but i cannot recieve calls from those same extensions here is a snippet from a log file on the free pbx :::::::::

Im assuming this is the line that is the error but am unsure as to where to fix it.

[2013-03-16 11:42:10] WARNING[30830] app_dial.c: Unable to create channel of type ‘SIP’ (cause 20 - Unknown)

Here is the rest of the snippet:::::

[2013-03-16 11:42:05] VERBOSE[2960] chan_sip.c: – Unregistered SIP ‘103’
[2013-03-16 11:42:06] VERBOSE[2960] chan_sip.c: – Registered SIP ‘103’ at 192.168.0.11:5065
[2013-03-16 11:42:06] NOTICE[2960] chan_sip.c: Peer ‘103’ is now Reachable. (18ms / 2000ms)
[2013-03-16 11:42:06] VERBOSE[2960] chan_sip.c: – Unregistered SIP ‘103’
[2013-03-16 11:42:06] VERBOSE[2960] chan_sip.c: – Registered SIP ‘103’ at 50.71.211.203:5065
[2013-03-16 11:42:10] VERBOSE[2960] netsock2.c: == Using SIP RTP TOS bits 184
[2013-03-16 11:42:10] VERBOSE[2960] netsock2.c: == Using SIP RTP CoS mark 5

This is showing that the extension 103(ipod) is registered and is trying to make a call to 101(iphone)

here is the entirety of the log im sorry if its long:::::

[2013-03-16 11:42:05] VERBOSE[2960] chan_sip.c: – Unregistered SIP ‘103’
[2013-03-16 11:42:06] VERBOSE[2960] chan_sip.c: – Registered SIP ‘103’ at 192.168.0.11:5065
[2013-03-16 11:42:06] NOTICE[2960] chan_sip.c: Peer ‘103’ is now Reachable. (18ms / 2000ms)
[2013-03-16 11:42:06] VERBOSE[2960] chan_sip.c: – Unregistered SIP ‘103’
[2013-03-16 11:42:06] VERBOSE[2960] chan_sip.c: – Registered SIP ‘103’ at XXXXXXXXXXXXXXX:5065
[2013-03-16 11:42:10] VERBOSE[2960] netsock2.c: == Using SIP RTP TOS bits 184
[2013-03-16 11:42:10] VERBOSE[2960] netsock2.c: == Using SIP RTP CoS mark 5
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/103-00002ace”, “1?ext-local,101,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (ext-local,101,1)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “__RINGTIMER=30”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Macro(“SIP/103-00002ace”, “exten-vm,101,101,0,0,0”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Macro(“SIP/103-00002ace”, “user-callerid,”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “AMPUSER=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/103-00002ace”, “0?report”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/103-00002ace”, “1?Set(REALCALLERIDNUM=103)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “AMPUSER=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “AMPUSERCIDNAME=mayasipod”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/103-00002ace”, “0?report”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:7] Set(“SIP/103-00002ace”, “AMPUSERCID=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:8] Set(“SIP/103-00002ace”, “CALLERID(all)=“mayasipod” <103>”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/103-00002ace”, “0?limit”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:10] ExecIf(“SIP/103-00002ace”, “0?Set(GROUP(concurrency_limit)=103)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] GosubIf(“SIP/103-00002ace”, “7?sub-ccss,s,1(macro-exten-vm,101)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/103-00002ace”, “0?Return()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “CCSS_SETUP=TRUE”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] GosubIf(“SIP/103-00002ace”, “0?monitor_config,1(macro-exten-vm,101):monitor_default,1(macro-exten-vm,101)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/103-00002ace”, “1?is_exten”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (sub-ccss,monitor_default,4)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “CALLCOMPLETION(cc_monitor_policy)=generic”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “CALLCOMPLETION(cc_max_monitors)=5”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] Return(“SIP/103-00002ace”, “TRUE”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] GosubIf(“SIP/103-00002ace”, “7?agent_config,1():agent_default,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “CALLCOMPLETION(cc_agent_policy)=generic”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “CALLCOMPLETION(cc_offer_timer)=30”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] Set(“SIP/103-00002ace”, “CALLCOMPLETION(ccbs_available_timer)=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “CALLCOMPLETION(ccnr_available_timer)=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “CALLCOMPLETION(cc_callback_macro)=ccss-default”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] ExecIf(“SIP/103-00002ace”, “1?Set(CALLCOMPLETION(cc_recall_timer)=)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:7] ExecIf(“SIP/103-00002ace”, “1?Set(CALLCOMPLETION(cc_max_agents)=)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:8] ExecIf(“SIP/103-00002ace”, “0?Set(CALLCOMPLETION(cc_agent_dialstring)=Local/[email protected])”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:9] Set(“SIP/103-00002ace”, “CALLCOMPLETION(cc_callback_macro)=ccss-default”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:10] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “DB(AMPUSER/103/ccss/last_number)=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/103-00002ace”, “0?Set(CHANNEL(language)=)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:13] GotoIf(“SIP/103-00002ace”, “0?continue”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:14] Set(“SIP/103-00002ace”, “__TTL=64”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/103-00002ace”, “1?continue”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-user-callerid,s,26)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:26] Set(“SIP/103-00002ace”, “CALLERID(number)=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:27] Set(“SIP/103-00002ace”, “CALLERID(name)=mayasipod”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:28] Set(“SIP/103-00002ace”, “CHANNEL(language)=en”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “RingGroupMethod=none”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] Set(“SIP/103-00002ace”, “__EXTTOCALL=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “__PICKUPMARK=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “RT=30”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] Gosub(“SIP/103-00002ace”, “sub-record-check,s,1(exten,101,)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/103-00002ace”, “1?check”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (sub-record-check,s,6)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] Set(“SIP/103-00002ace”, “__MON_FMT=wav”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/103-00002ace”, “1?next”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (sub-record-check,s,10)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:10] ExecIf(“SIP/103-00002ace”, “0?Return()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/103-00002ace”, “0?exten,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:12] Set(“SIP/103-00002ace”, “__REC_STATUS=INITIALIZED”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/103-00002ace”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:14] Set(“SIP/103-00002ace”, “NOW=1363452130”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:15] Set(“SIP/103-00002ace”, “__DAY=16”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:16] Set(“SIP/103-00002ace”, “__MONTH=03”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:17] Set(“SIP/103-00002ace”, “__YEAR=2013”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:18] Set(“SIP/103-00002ace”, “__TIMESTR=20130316-114210”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:19] Set(“SIP/103-00002ace”, “__FROMEXTEN=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:20] Set(“SIP/103-00002ace”, “__CALLFILENAME=exten-101-103-20130316-114210-1363452130.10958”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:21] Goto(“SIP/103-00002ace”, “exten,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (sub-record-check,exten,1)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/103-00002ace”, “0?callee”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “__REC_POLICY_MODE=dontcare”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/103-00002ace”, “1?caller”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (sub-record-check,exten,10)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]k:10] Set(“SIP/103-00002ace”, “__REC_POLICY_MODE=always”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] GosubIf(“SIP/103-00002ace”, “1?record,1(exten,101,103)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “AUDIOHOOK_INHERIT(MixMonitor)=yes”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] MixMonitor(“SIP/103-00002ace”, “2013/03/16/exten-101-103-20130316-114210-1363452130.10958.wav,”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] Set(“SIP/103-00002ace”, “__REC_STATUS=RECORDING”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “CDR(recordingfile)=exten-101-103-20130316-114210-1363452130.10958.wav”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:12] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/103-00002ace”, “1?macrodial”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-exten-vm,s,13)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:13] GosubIf(“SIP/103-00002ace”, “0?clrheader,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:14] Macro(“SIP/103-00002ace”, “dial-one,30,tr,101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “DEXTEN=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “DIALSTATUS_CW=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] GosubIf(“SIP/103-00002ace”, “0?screen,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] GosubIf(“SIP/103-00002ace”, “0?cf,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/103-00002ace”, “1?skip1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-dial-one,s,8)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:8] GotoIf(“SIP/103-00002ace”, “0?nodial”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/103-00002ace”, “0?continue”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:10] Set(“SIP/103-00002ace”, “EXTHASCW=ENABLED”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/103-00002ace”, “0?next1:cwinusebusy”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-dial-one,s,23)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:23] GotoIf(“SIP/103-00002ace”, “1?next3:continue”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-dial-one,s,24)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:24] ExecIf(“SIP/103-00002ace”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:25] GotoIf(“SIP/103-00002ace”, “0?nodial”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:26] GosubIf(“SIP/103-00002ace”, “1?dstring,1():dlocal,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “DSTRING=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “DEVICES=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/103-00002ace”, “0?Return()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/103-00002ace”, “0?Set(DEVICES=01)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “LOOPCNT=1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] Set(“SIP/103-00002ace”, “ITER=1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:7] Set(“SIP/103-00002ace”, “THISDIAL=SIP/101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:8] GosubIf(“SIP/103-00002ace”, “1?zap2dahdi,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/103-00002ace”, “0?Return()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “NEWDIAL=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] Set(“SIP/103-00002ace”, “LOOPCNT2=1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “ITER2=1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] Set(“SIP/103-00002ace”, “THISPART2=SIP/101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:6] ExecIf(“SIP/103-00002ace”, “0?Set(THISPART2=DAHDI/101)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:7] Set(“SIP/103-00002ace”, “NEWDIAL=SIP/101&”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:8] Set(“SIP/103-00002ace”, “ITER2=2”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/103-00002ace”, “0?begin2”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:10] Set(“SIP/103-00002ace”, “THISDIAL=SIP/101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:9] Set(“SIP/103-00002ace”, “DSTRING=SIP/101&”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:10] Set(“SIP/103-00002ace”, “ITER=2”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/103-00002ace”, “0?begin”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:12] Set(“SIP/103-00002ace”, “DSTRING=SIP/101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:13] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:27] GotoIf(“SIP/103-00002ace”, “0?nodial”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:28] GotoIf(“SIP/103-00002ace”, “0?skiptrace”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:29] GosubIf(“SIP/103-00002ace”, “1?ctset,1():ctclear,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “DB(CALLTRACE/101)=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Return(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:30] Set(“SIP/103-00002ace”, “D_OPTIONS=tr”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:31] ExecIf(“SIP/103-00002ace”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:32] ExecIf(“SIP/103-00002ace”, “0?SIPAddHeader()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:33] ExecIf(“SIP/103-00002ace”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:34] GosubIf(“SIP/103-00002ace”, “0?qwait,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:35] Set(“SIP/103-00002ace”, “__CWIGNORE=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:36] Set(“SIP/103-00002ace”, “__KEEPCID=TRUE”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:37] GotoIf(“SIP/103-00002ace”, “0?usegoto,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:38] GotoIf(“SIP/103-00002ace”, “0?godial”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:39] Set(“SIP/103-00002ace”, “CONNECTEDLINE(name,i)=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:40] Set(“SIP/103-00002ace”, “CONNECTEDLINE(num)=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:41] Set(“SIP/103-00002ace”, “D_OPTIONS=trI”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:42] Dial(“SIP/103-00002ace”, “SIP/101,30,trI”) in new stack
[2013-03-16 11:42:10] WARNING[30830] app_dial.c: Unable to create channel of type ‘SIP’ (cause 20 - Unknown)
[2013-03-16 11:42:10] VERBOSE[30830] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:43] ExecIf(“SIP/103-00002ace”, “0?Set(DIALSTATUS=)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:44] GosubIf(“SIP/103-00002ace”, “0?s-CHANUNAVAIL,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:45] MacroExit(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:15] Set(“SIP/103-00002ace”, “SV_DIALSTATUS=CHANUNAVAIL”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:16] GosubIf(“SIP/103-00002ace”, “0?docfu,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:17] GosubIf(“SIP/103-00002ace”, “0?docfb,1()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:18] Set(“SIP/103-00002ace”, “DIALSTATUS=CHANUNAVAIL”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:19] ExecIf(“SIP/103-00002ace”, “0?MacroExit()”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:20] GotoIf(“SIP/103-00002ace”, “0?s-CHANUNAVAIL,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:21] Macro(“SIP/103-00002ace”, “vm,101,CHANUNAVAIL,”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Macro(“SIP/103-00002ace”, “user-callerid,SKIPTTL”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]lerid:1] Set(“SIP/103-00002ace”, “AMPUSER=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/103-00002ace”, “9?report”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-user-callerid,s,13)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:13] GotoIf(“SIP/103-00002ace”, “1?continue”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-user-callerid,s,26)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:26] Set(“SIP/103-00002ace”, “CALLERID(number)=103”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:27] Set(“SIP/103-00002ace”, “CALLERID(name)=mayasipod”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:28] Set(“SIP/103-00002ace”, “CHANNEL(language)=en”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “VMGAIN=”"") in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] Macro(“SIP/103-00002ace”, “blkvm-check,”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “GOSUB_RETVAL=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] ExecIf(“SIP/103-00002ace”, “0?Set(GOSUB_RETVAL=TRUE)”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] MacroExit(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] GotoIf(“SIP/103-00002ace”, “1?vmx,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-vm,vmx,1)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “MEXTEN=101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] Set(“SIP/103-00002ace”, “MMODE=CHANUNAVAIL”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] Set(“SIP/103-00002ace”, “RETVM=”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Set(“SIP/103-00002ace”, “MODE=unavail”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/103-00002ace”, “1?chknomsg”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-vm,vmx,8)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:8] GotoIf(“SIP/103-00002ace”, “0?s-CHANUNAVAIL,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/103-00002ace”, “1?notdirect”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-vm,vmx,11)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:11] NoOp(“SIP/103-00002ace”, “Checking if ext 101 is enabled: “) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:12] GotoIf(“SIP/103-00002ace”, “1?s-CHANUNAVAIL,1”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-vm,s-CHANUNAVAIL,1)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Macro(“SIP/103-00002ace”, “get-vmcontext,101”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Set(“SIP/103-00002ace”, “VMCONTEXT=default”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/103-00002ace”, “0?200:300”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Goto (macro-get-vmcontext,s,300)
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]o-get-vmcontext:300] NoOp(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:10] VERBOSE[30830] pbx.c: – Executing [[email protected]:2] VoiceMail(“SIP/103-00002ace”, “[email protected],u”””) in new stack
[2013-03-16 11:42:10] VERBOSE[30831] app_mixmonitor.c: == Begin MixMonitor Recording SIP/103-00002ace
[2013-03-16 11:42:11] VERBOSE[30830] file.c: – <SIP/103-00002ace> Playing ‘vm-theperson.ulaw’ (language ‘en’)
[2013-03-16 11:42:12] VERBOSE[30830] file.c: – <SIP/103-00002ace> Playing ‘digits/1.ulaw’ (language ‘en’)
[2013-03-16 11:42:13] VERBOSE[30830] file.c: – <SIP/103-00002ace> Playing ‘digits/0.ulaw’ (language ‘en’)
[2013-03-16 11:42:14] VERBOSE[30830] file.c: – <SIP/103-00002ace> Playing ‘digits/1.ulaw’ (language ‘en’)
[2013-03-16 11:42:14] VERBOSE[30830] app_macro.c: == Spawn extension (macro-vm, s-CHANUNAVAIL, 2) exited non-zero on ‘SIP/103-00002ace’ in macro ‘vm’
[2013-03-16 11:42:14] VERBOSE[30830] app_macro.c: == Spawn extension (macro-exten-vm, s, 21) exited non-zero on ‘SIP/103-00002ace’ in macro ‘exten-vm’
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: == Spawn extension (ext-local, 101, 2) exited non-zero on ‘SIP/103-00002ace’
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] Macro(“SIP/103-00002ace”, “hangupcall,”) in new stack
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/103-00002ace”, “1?theend”) in new stack
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: – Goto (macro-hangupcall,s,3)
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/103-00002ace”, “0?Set(CDR(recordingfile)=)”) in new stack
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: – Executing [[email protected]:4] Hangup(“SIP/103-00002ace”, “”) in new stack
[2013-03-16 11:42:14] VERBOSE[30830] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/103-00002ace’ in macro ‘hangupcall’
[2013-03-16 11:42:14] VERBOSE[30830] pbx.c: == Spawn extension (ext-local, h, 1) exited non-zero on ‘SIP/103-00002ace’
[2013-03-16 11:42:14] VERBOSE[30831] app_mixmonitor.c: == MixMonitor close filestream
[2013-03-16 11:42:14] VERBOSE[30831] app_mixmonitor.c: == End MixMonitor Recording SIP/103-00002ace

its almost like my 101(iphone) is not registering but yet it shows on the phone that it is connected to home

can anyone help

Folks i figured it out in the extension settings i needed to switch the NAT to YES it was on NO so it works now