Re: help please

Good evening folks i am hoping someone can help me here.

I am having a real problem with outbound routes and trunking I have tried alomost everything i can think of to get it right but i always either get either all circuits are buzy or this call cannot be placed as dialed.

here is a snippet of the FULL.log:

[2013-03-04 19:09:50] WARNING[2960] chan_sip.c: Received response: “Forbidden” from ‘“204XXX1703” sip:[email protected];tag=as0fe9f56c’
[2013-03-04 19:09:50] VERBOSE[12094] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:23] NoOp(“SIP/101-00000037”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:24] Goto(“SIP/101-00000037”, “s-CONGESTION,1”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:1] Set(“SIP/101-00000037”, “RC=34”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:2] Goto(“SIP/101-00000037”, “34,1”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Goto (macro-dialout-trunk,34,1)
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:1] Goto(“SIP/101-00000037”, “continue,1”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/101-00000037”, “1?noreport”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:3] NoOp(“SIP/101-00000037”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 34 - failing through to other trunks”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:4] Set(“SIP/101-00000037”, “CALLERID(number)=101”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:6] Macro(“SIP/101-00000037”, “outisbusy,”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:1] Progress(“SIP/101-00000037”, “”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/101-00000037”, “0?emergency,1”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/101-00000037”, “0?intracompany,1”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:4] Playback(“SIP/101-00000037”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[2013-03-04 19:09:50] VERBOSE[12094] file.c: – <SIP/101-00000037> Playing ‘all-circuits-busy-now.gsm’ (language ‘en’)
[2013-03-04 19:09:52] VERBOSE[12094] file.c: – <SIP/101-00000037> Playing ‘pls-try-call-later.gsm’ (language ‘en’)
[2013-03-04 19:09:52] VERBOSE[12094] app_macro.c: == Spawn extension (macro-outisbusy, s, 4) exited non-zero on ‘SIP/101-00000037’ in macro ‘outisbusy’
[2013-03-04 19:09:52] VERBOSE[12094] pbx.c: == Spawn extension (from-internal, 12042305149, 6) exited non-zero on ‘SIP/101-00000037’
[2013-03-04 19:09:52] VERBOSE[12094] pbx.c: – Executing [[email protected]:1] Hangup(“SIP/101-00000037”, “”) in new stack
[2013-03-04 19:09:52] VERBOSE[12094] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/101-00000037’
[2013-03-04 19:12:37] NOTICE[2960] chan_sip.c: Registration from ‘“Mike” sip:[email protected]’ failed for ‘184.73.248.111:55825’ - No matching peer found
[2013-03-04 19:12:37] NOTICE[2960] chan_sip.c: Registration from ‘“Mike” sip:[email protected]’ failed for ‘184.73.248.111:55825’ - No matching peer found

is there anyone that can help me

will your carrier accept a call with the CID set to 204XXX1703 ?

[2013-03-04 19:09:50] WARNING[2960] chan_sip.c: Received response: “Forbidden” from ‘“204XXX1703” ;tag=as0fe9f56c’
[2013-03-04 19:09:50] VERBOSE[12094] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[2013-03-04 19:09:50] VERBOSE[12094] pbx.c: – Executing [[email protected]:23] NoOp(“SIP/101-00000037”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34”) in new stack

also on another note:-

[2013-03-04 19:12:37] NOTICE[2960] chan_sip.c: Registration from '“Mike” ’ failed for ‘184.73.248.111:55825’ - No matching peer found

Is perhaps a problem, do you know Mike? Is this an install on an Amazon EC2 machine? Do you have an effective firewall in place?

I say this because maybe someone is already using your trunk when you place a call, (ISDN hangup cause 34)

The missing parts of the call log might also help (1-22), you started at [email protected]:23