Hi there,
I’m using AsteriskNow1.5 with FreePBX2.5.1.2 with CentOS 5.3
When I see the status of my peers, it appears that the ports are different sometimes other than the default port which is 5060.
Any explanation for this?
how about providing an example showing it. Also exact details of which version of AsteriskNow as 1.5 has not been released as final so you must be using one of the Beta’s and knowing which one would help us out.
I am using AsteriskNow 1.5 official released from AsteriskNow. It is Asterisk (Ver. 1.4.24)
Please refer to the link below for official released from AsteriskNow
http://www.asterisknow.org/node/48579
Is it normal for the port to change from time to time for each time the SIP device to register at the freepbx?
Name/username Host Dyn Nat ACL Port Status
3013/3013 (Unspecified) D N A 0 UNKNOWN
3012 (Unspecified) D N A 0 UNKNOWN
3011/3011 (Unspecified) D N A 0 UNKNOWN
3010/3010 (Unspecified) D N A 0 UNKNOWN
3009/3009 115.134.62.28 D N 5060 OK (119 ms)
3008/3008 60.52.72.44 D N A 10807 OK (123 ms)
3007/3007 58.23.116.211 D N 5060 OK (24 ms)
3006/3006 60.50.23.235 D N 5060 OK (140 ms)
3005/3005 118.101.180.41 D N 24323 OK (122 ms)
3004/3004 124.13.0.31 D N 5060 OK (94 ms)
3003/3003 58.22.16.100 D N 1353 OK (13 ms)
3002/3002 118.110.70.31 D N 1195 OK (125 ms)
12 sip peers [Monitored: 8 online, 4 offline Unmonitored: 0 online, 0 offline]