Passing the inbound CID to follow me

General Help
1

OK We have a few boxes all where older freepbx 2.1.1 and some of the dev boxes where the older 2.2 branch

After having tested the 2.1.3 and Ast 1.2.13 and so on, I update the older production boxes running 2.1.1 to 2.1.3 all was good (or so I thought)

I took the dev boxes and moved them to the last release a few days later, as no one had reported any problems (I keep a second system for productions boxes for this stuff)

All is cool…NOT… for some reason the inbound caller ID is not passed on to the follow me end point (cell / home phone) it stills shows correct for the extens.

I have gone over all my notes and can not see where the change happened.

Anyone else having this issue show up???

And the folks who now have the new GUI to play with will not go back to the old GUI, they are all chomping at the bit for the new GUI on the production boxes as well…

But this has me stumped…is it just me or what??

2

Having the same problem here now with the followme CLID

Roger Workman
Business Development
Upperclassman/Universal Holdings LLC
Voice: 304.324.3800
Fax: 304.324.3801
ICQ: 4447584
FWD Network: 56505
Website: http://www.upperclassman.net
Support: http://www.upperclassman.net/maint.htm
FAQ’s: http://www.upperclassman.net/portalfaq.htm

This e-mail and any of its attachments may contain sensitive information, which is privileged, confidential, or subject to copyright belonging to Asset Management LLC, Universal Holdings LLC or Upperclassman LLC. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of or printout of this e-mail.

[quote] -----Original Message-----
From: [email protected] [mailto:amportal-users-
[email protected]] On Behalf Of bubba
Sent: Friday, December 01, 2006 9:19 AM
To: [email protected]
Subject: [Amportal-users] Passing the inbound CID to follow me

OK We have a few boxes all where older freepbx 2.1.1 and some of the dev
boxes where the older 2.2 branch

After having tested the 2.1.3 and Ast 1.2.13 and so on, I update the older
production boxes running 2.1.1 to 2.1.3 all was good (or so I thought)

I took the dev boxes and moved them to the last release a few days later,
as no one had reported any problems (I keep a second system for
productions boxes for this stuff)

All is cool…NOT… for some reason the inbound caller ID is not passed
on to the follow me end point (cell / home phone) it stills shows correct
for the extens.

I have gone over all my notes and can not see where the change happened.

Anyone else having this issue show up???

And the folks who now have the new GUI to play with will not go back to
the old GUI, they are all chomping at the bit for the new GUI on the
production boxes as well…

But this has me stumped…is it just me or what??

Bubba
http://pbx4pros.com

Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share
your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users
[/quote]

Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users

Post generated using Mail2Forum (http://www.mail2forum.com)

3

We have the same problem and we are on version 2.1.2. I think it was a
followme update and not a Freepbx update.

If I remember correctly I had a 2.1.2 temp box and then loaded a new box
with 2.1.2 and then noticed the issue when I replaced the temp box with new
one.

Rick

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of bubba
Sent: Friday, December 01, 2006 7:19 AM
To: [email protected]
Subject: [Amportal-users] Passing the inbound CID to follow me

OK We have a few boxes all where older freepbx 2.1.1 and some of the dev
boxes where the older 2.2 branch

After having tested the 2.1.3 and Ast 1.2.13 and so on, I update the older
production boxes running 2.1.1 to 2.1.3 all was good (or so I thought)

I took the dev boxes and moved them to the last release a few days later, as
no one had reported any problems (I keep a second system for productions
boxes for this stuff)

All is cool…NOT… for some reason the inbound caller ID is not passed on
to the follow me end point (cell / home phone) it stills shows correct for
the extens.

I have gone over all my notes and can not see where the change happened.

Anyone else having this issue show up???

And the folks who now have the new GUI to play with will not go back to the
old GUI, they are all chomping at the bit for the new GUI on the production
boxes as well…

But this has me stumped…is it just me or what??

Bubba
http://pbx4pros.com

Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users

Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users

Post generated using Mail2Forum (http://www.mail2forum.com)

4

[quote=“bubba”]All is cool…NOT… for some reason the inbound caller ID is not passed on to the follow me end point (cell / home phone) it stills shows correct for the extens.

But this has me stumped…is it just me or what??[/quote]

This is also in the 2.2 versions. I’ve been tinkering around trying to get it to work, but haven’t yet.

5

Hey guys, I found a bug :slight_smile:
The “Never Override CallerID” setting in your trunk neeeds to be set.

It appears that somehow the code got the value backwards.
Enable it and let me know if it works for you all as well.

6

That was it \U know I never saw that box…I mean I guess I have looked at the trunks pages on four or five boxes as of late and GEE I guess I need to wake up.

7

Where is the switch that needs to be changed — which config file or I am too dumb to understand?

Thanks for holding our hands when need arises’

8

OK I had to upgrade al the boxes to the RC1 to get this to work once more
(I too spend way too much time going over the old / new conf files)

It is in the GUI under trunks
I really need to spend some time to go thru the GUI as I never saw the Check box as it is not in the older versions of FPBX

I still can not see what changes to break it in the first place, but everyone is happy with the new gui so it is all good.