Parking Freepbx with 3 W56H on a W60b

watersong · September 23, 2020, 8:45pm

Having a few issues parking calls from my W56h phones.

All 3 phones are connecting using the extension # and secret key since EPM would only work with 1 phone
-phones ring properly, transfer to another extension works and hold works

I did NOT provision the base to connect to the freepbx, is this required?

Within the W60B, what should the Call Park settings be? I am NOT using the Parking PRO module

FAC or TRANSFER?
Call Park Code? (I thought it was 70 or maybe *70, 88?)
Park Retrieve Code (71?, 85?)

So far what I seemed to have done while on a call with extension 101 to my cell phone was park the extension into the parking lot, was told 71 … but when I did *8571 from extension 102 i could only talk between the extensions, the call on my cell phone was gone.

I’m going to do some firmware updates as well.

PBX Version: 15.0.16.75

PBX Distro: 12.7.8-2008-1.sng7

Asterisk Version: 16.13.0

Thanks!

watersong · September 26, 2020, 5:20pm

This can’t be this complicated, someone please chime in. I just did the following:

W56H with extension calls by cell and i can have a chat with myself

On the W56h I press transfer … enter 70 … then the the green call button.
I hear “71” and the hold music
On the screen i have 2 options:
-End - the call resumes
-Transfer - seems to transfer but never hear hold music on my cell

If I do transfer, the W56h goes back to normal … if I press 71 send it beeps like it resumed the call, but I hear nothing on the cell. The cell ends the call because its been dropped

Here is the log

call my cell from ext 101 on w56h
answer and call goes both ways
from w56h, press transfer, type 70, press send (for attended) to hear ‘71’ and music, then transfer button
2 seconds later press 71, send on w56h and I can;t hear anything on either phone despite the call being resumed
I hang up the w56h and a few seconds later the cell hangs up on its own.

[[email protected] ~]# tail -f /var/log/asterisk/full
[2020-09-26 11:11:33] VERBOSE[9973][C-00000018] pbx.c: Executing [[email protected]:6] Set(“PJSIP/101-00000017”, “__CRM_HANGUP=1”) in new stack
[2020-09-26 11:11:33] VERBOSE[9973][C-00000018] pbx.c: Executing [[email protected]:7] AGI(“PJSIP/101-00000017”, “agi://127.0.0.1/sangomacrm.agi”) in new stack
[2020-09-26 11:11:34] VERBOSE[9973][C-00000018] res_agi.c: <PJSIP/101-00000017>AGI Script agi://127.0.0.1/sangomacrm.agi completed, returning 0
[2020-09-26 11:11:34] VERBOSE[9973][C-00000018] pbx.c: Executing [[email protected]:8] Return(“PJSIP/101-00000017”, “”) in new stack
[2020-09-26 11:11:34] VERBOSE[9973][C-00000018] app_stack.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘PJSIP/101-00000017’
[2020-09-26 11:11:34] VERBOSE[9973][C-00000018] app_stack.c: PJSIP/101-00000017 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
[2020-09-26 11:11:38] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:11:38.427-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x2b29c80”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46638”,UsingPassword=“0”,SessionTV=“2020-09-26T11:11:38.426-0600”
[2020-09-26 11:12:14] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:12:14.020-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e40007f80”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46644”,UsingPassword=“0”,SessionTV=“2020-09-26T11:12:14.020-0600”
[2020-09-26 11:12:28] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:12:28.938-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e4c000930”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46650”,UsingPassword=“0”,SessionTV=“2020-09-26T11:12:28.938-0600”
[2020-09-26 11:12:49] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:12:49.612-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e48008020”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46658”,UsingPassword=“0”,SessionTV=“2020-09-26T11:12:49.612-0600”
[2020-09-26 11:13:10] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:10.040-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e54084a60”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46664”,UsingPassword=“0”,SessionTV=“2020-09-26T11:13:10.040-0600”
[2020-09-26 11:13:18] SECURITY[2544] res_security_log.c: SecurityEvent=“ChallengeSent”,EventTV=“2020-09-26T11:13:18.104-0600”,Severity=“Informational”,Service=“PJSIP”,EventVersion=“1”,AccountID=“101”,SessionID="[email protected]",LocalAddress=“IPV4/UDP/192.168.5.25/5060”,RemoteAddress=“IPV4/UDP/192.168.5.26/5060”,Challenge=""
[2020-09-26 11:13:18] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:18.114-0600”,Severity=“Informational”,Service=“PJSIP”,EventVersion=“1”,AccountID=“101”,SessionID="[email protected]",LocalAddress=“IPV4/UDP/192.168.5.25/5060”,RemoteAddress=“IPV4/UDP/192.168.5.26/5060”,UsingPassword=“1”
[2020-09-26 11:13:18] VERBOSE[2488] pbx_variables.c: Setting global variable ‘SIPDOMAIN’ to ‘192.168.5.25’
[2020-09-26 11:13:18] VERBOSE[2488] netsock2.c: Using SIP RTP Audio TOS bits 184
[2020-09-26 11:13:18] VERBOSE[2488] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2020-09-26 11:13:18] VERBOSE[2488] netsock2.c: Using SIP RTP Audio CoS mark 5
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] Macro(“PJSIP/101-0000001a”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] Set(“PJSIP/101-0000001a”, “TOUCH_MONITOR=1601140398.34”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] Set(“PJSIP/101-0000001a”, “AMPUSER=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] Set(“PJSIP/101-0000001a”, “HOTDESCKCHAN=101-0000001a”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:4] Set(“PJSIP/101-0000001a”, “HOTDESKEXTEN=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] Set(“PJSIP/101-0000001a”, “HOTDESKCALL=0”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:6] ExecIf(“PJSIP/101-0000001a”, “0?Set(HOTDESKCALL=1)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(name)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] GotoIf(“PJSIP/101-0000001a”, “0?report”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:9] ExecIf(“PJSIP/101-0000001a”, “1?Set(REALCALLERIDNUM=101)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:10] Set(“PJSIP/101-0000001a”, “AMPUSER=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:11] GotoIf(“PJSIP/101-0000001a”, “0?limit”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:12] Set(“PJSIP/101-0000001a”, “AMPUSERCIDNAME=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:13] ExecIf(“PJSIP/101-0000001a”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:14] GotoIf(“PJSIP/101-0000001a”, “0?report”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:15] Set(“PJSIP/101-0000001a”, “AMPUSERCID=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:16] Set(“PJSIP/101-0000001a”, “__DIAL_OPTIONS=HhTtr”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:17] Set(“PJSIP/101-0000001a”, “CALLERID(all)=“101” <101>”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:18] ExecIf(“PJSIP/101-0000001a”, “0?Set(CUSDIAL=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:19] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(all)=“101” <101>)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:20] GotoIf(“PJSIP/101-0000001a”, “0?limit”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:21] ExecIf(“PJSIP/101-0000001a”, “1?Set(GROUP(concurrency_limit)=101)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:22] ExecIf(“PJSIP/101-0000001a”, “0?Set(CHANNEL(language)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:23] NoOp(“PJSIP/101-0000001a”, “Macro Depth is 1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:24] GotoIf(“PJSIP/101-0000001a”, “1?report2:macroerror”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (macro-user-callerid,s,25)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:25] GotoIf(“PJSIP/101-0000001a”, “1?continue”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (macro-user-callerid,s,44)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:44] Set(“PJSIP/101-0000001a”, “CALLERID(number)=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:45] Set(“PJSIP/101-0000001a”, “CALLERID(name)=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:46] GotoIf(“PJSIP/101-0000001a”, “0?cnum”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:47] Set(“PJSIP/101-0000001a”, “CDR(cnam)=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:48] Set(“PJSIP/101-0000001a”, “CDR(cnum)=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:49] Set(“PJSIP/101-0000001a”, “CHANNEL(language)=en”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] Gosub(“PJSIP/101-0000001a”, “sub-record-check,s,1(out,9708462745,dontcare)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] GotoIf(“PJSIP/101-0000001a”, “0?initialized”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] Set(“PJSIP/101-0000001a”, “__REC_STATUS=INITIALIZED”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] Set(“PJSIP/101-0000001a”, “NOW=1601140398”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:4] Set(“PJSIP/101-0000001a”, “__DAY=26”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] Set(“PJSIP/101-0000001a”, “__MONTH=09”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:6] Set(“PJSIP/101-0000001a”, “__YEAR=2020”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] Set(“PJSIP/101-0000001a”, “__TIMESTR=20200926-111318”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] Set(“PJSIP/101-0000001a”, “__FROMEXTEN=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:9] Set(“PJSIP/101-0000001a”, “__MON_FMT=wav”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:10] NoOp(“PJSIP/101-0000001a”, “Recordings initialized”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:11] ExecIf(“PJSIP/101-0000001a”, “0?Set(ARG3=dontcare)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:12] Set(“PJSIP/101-0000001a”, “REC_POLICY_MODE_SAVE=”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:13] ExecIf(“PJSIP/101-0000001a”, “0?Set(REC_STATUS=NO)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:14] GotoIf(“PJSIP/101-0000001a”, “3?checkaction”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (sub-record-check,s,17)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:17] GotoIf(“PJSIP/101-0000001a”, “1?sub-record-check,out,1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (sub-record-check,out,1)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] NoOp(“PJSIP/101-0000001a”, “Outbound Recording Check from 101 to 9708462745”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] Set(“PJSIP/101-0000001a”, “RECMODE=dontcare”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] ExecIf(“PJSIP/101-0000001a”, “1?Goto(routewins)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (sub-record-check,out,7)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] Gosub(“PJSIP/101-0000001a”, “recordcheck,1(dontcare,out,9708462745)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] NoOp(“PJSIP/101-0000001a”, “Starting recording check against dontcare”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] Goto(“PJSIP/101-0000001a”, “dontcare”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] Return(“PJSIP/101-0000001a”, “”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] Return(“PJSIP/101-0000001a”, “”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] ExecIf(“PJSIP/101-0000001a”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:4] Set(“PJSIP/101-0000001a”, “_ROUTEID=3”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] Set(“PJSIP/101-0000001a”, “_ROUTENAME=SIPStation-Out”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:6] Set(“PJSIP/101-0000001a”, “MOHCLASS=default”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] Set(“PJSIP/101-0000001a”, “_CALLERIDNAMEINTERNAL=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] Set(“PJSIP/101-0000001a”, “_CALLERIDNUMINTERNAL=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:9] Set(“PJSIP/101-0000001a”, “_EMAILNOTIFICATION=FALSE”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:10] Set(“PJSIP/101-0000001a”, “_NODEST=”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:11] Macro(“PJSIP/101-0000001a”, “dialout-trunk,1,9708462745,off”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] Set(“PJSIP/101-0000001a”, “DIAL_TRUNK=1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] ExecIf(“PJSIP/101-0000001a”, “0?Set(DIAL_OPTIONS=Hhtr)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] GosubIf(“PJSIP/101-0000001a”, “0?sub-pincheck,s,1()”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:4] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(num)=101)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] GotoIf(“PJSIP/101-0000001a”, “0?disabletrunk,1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:6] Set(“PJSIP/101-0000001a”, “DIAL_NUMBER=9708462745”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] Set(“PJSIP/101-0000001a”, “DIAL_TRUNK_OPTIONS=HhTtr”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] Set(“PJSIP/101-0000001a”, “OUTBOUND_GROUP=OUT_1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:9] Set(“PJSIP/101-0000001a”, “DIAL_TRUNK_OPTIONS=T”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:10] GotoIf(“PJSIP/101-0000001a”, “1?nomax”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (macro-dialout-trunk,s,12)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:12] GotoIf(“PJSIP/101-0000001a”, “0?skipoutcid”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:13] Macro(“PJSIP/101-0000001a”, “outbound-callerid,1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] NoOp(“PJSIP/101-0000001a”, “101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] NoOp(“PJSIP/101-0000001a”, “”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] NoOp(“PJSIP/101-0000001a”, “off”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:4] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:6] Set(“PJSIP/101-0000001a”, “HOTDESCKCHAN=101-0000001a”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] Set(“PJSIP/101-0000001a”, “HOTDESKEXTEN=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] Set(“PJSIP/101-0000001a”, “HOTDESKCALL=0”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:9] ExecIf(“PJSIP/101-0000001a”, “0?Set(HOTDESKCALL=1)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:10] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(name)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:11] Set(“PJSIP/101-0000001a”, “ALLOWTHISROUTE=NO”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:12] ExecIf(“PJSIP/101-0000001a”, “0?Set(ALLOWTHISROUTE=YES)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:13] ExecIf(“PJSIP/101-0000001a”, “0?Hangup()”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:14] ExecIf(“PJSIP/101-0000001a”, “0?Set(REALCALLERIDNUM=101)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:15] ExecIf(“PJSIP/101-0000001a”, “0?Set(AMPUSER=101)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:16] GotoIf(“PJSIP/101-0000001a”, “1?normcid”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (macro-outbound-callerid,s,20)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:20] Set(“PJSIP/101-0000001a”, “USEROUTCID=”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:21] Set(“PJSIP/101-0000001a”, “EMERGENCYCID=”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:22] ExecIf(“PJSIP/101-0000001a”, “0?Set(EMERGENCYCID=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:23] Set(“PJSIP/101-0000001a”, “TRUNKOUTCID=9704394832”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:24] GotoIf(“PJSIP/101-0000001a”, “1?trunkcid”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx_builtins.c: Goto (macro-outbound-callerid,s,30)
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:30] ExecIf(“PJSIP/101-0000001a”, “1?Set(CALLERID(all)=9704394832)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:31] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(all)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:32] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(all)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:33] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERID(all)=101)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:34] Set(“PJSIP/101-0000001a”, “TIOHIDE=no”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:35] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:36] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:37] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:38] ExecIf(“PJSIP/101-0000001a”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack

watersong · September 26, 2020, 5:20pm

[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:39] Set(“PJSIP/101-0000001a”, “CDR(outbound_cnum)=9704394832”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:40] Set(“PJSIP/101-0000001a”, “CDR(outbound_cnam)=”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:14] GosubIf(“PJSIP/101-0000001a”, “0?sub-flp-1,s,1()”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:15] Set(“PJSIP/101-0000001a”, “OUTNUM=9708462745”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:16] Set(“PJSIP/101-0000001a”, “custom=SIP/fpbx-1-3z9VxtkEkJWG”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:17] ExecIf(“PJSIP/101-0000001a”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:18] ExecIf(“PJSIP/101-0000001a”, “0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:19] Macro(“PJSIP/101-0000001a”, “dialout-trunk-predial-hook,”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] MacroExit(“PJSIP/101-0000001a”, “”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:20] GotoIf(“PJSIP/101-0000001a”, “0?skipcrm”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:21] Set(“PJSIP/101-0000001a”, “__CRM_DIRECTION=OUTBOUND”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:22] Set(“PJSIP/101-0000001a”, “__CRM_DESTINATION=9708462745”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:23] Set(“PJSIP/101-0000001a”, “__CRM_SOURCE=101”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:24] AGI(“PJSIP/101-0000001a”, “agi://127.0.0.1/sangomacrm.agi”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] res_agi.c: <PJSIP/101-0000001a>AGI Script agi://127.0.0.1/sangomacrm.agi completed, returning 0
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:25] Set(“PJSIP/101-0000001a”, “CHANNEL(hangup_handler_push)=crm-hangup,s,1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:26] NoOp(“PJSIP/101-0000001a”, “CRM Finished”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:27] GotoIf(“PJSIP/101-0000001a”, “0?bypass,1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:28] ExecIf(“PJSIP/101-0000001a”, “1?Set(CONNECTEDLINE(num,i)=9708462745)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:29] ExecIf(“PJSIP/101-0000001a”, “1?Set(CONNECTEDLINE(name,i)=CID:9704394832)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:30] ExecIf(“PJSIP/101-0000001a”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)9704394832)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:31] GotoIf(“PJSIP/101-0000001a”, “0?customtrunk”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:32] ExecIf(“PJSIP/101-0000001a”, “0?Set(DIAL_TRUNK_OPTIONS=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:33] Set(“PJSIP/101-0000001a”, “HASH(__SIPHEADERS,Alert-Info)=unset”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:34] Dial(“PJSIP/101-0000001a”, “SIP/fpbx-1-3z9VxtkEkJWG/9708462745,300,Tb(func-apply-sipheaders^s^1,(1))”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] netsock2.c: Using SIP RTP TOS bits 184
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] netsock2.c: Using SIP RTP CoS mark 5
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] app_stack.c: SIP/fpbx-1-3z9VxtkEkJWG-00000008 Internal Gosub(func-apply-sipheaders,s,1(1)) start
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:1] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:2] NoOp(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “Applying SIP Headers to channel SIP/fpbx-1-3z9VxtkEkJWG-00000008”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:3] Set(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “TECH=SIP”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:4] Set(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “SIPHEADERKEYS=Alert-Info”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] While(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “1”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:6] Set(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “sipheader=unset”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:7] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “1?SIPRemoveHeader(Alert-Info:)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:8] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0?Set(PJSIP_HEADER(remove,Alert-Info)=)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:9] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0?Set(sipheader=http://127.0.0.1;info=unset)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:10] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0?Set(sipheader=http://127.0.0.1unset)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:11] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0?SIPAddHeader(Alert-Info:unset)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:12] ExecIf(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0?Set(PJSIP_HEADER(add,Alert-Info)=unset)”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:13] EndWhile(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:5] While(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “0”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] pbx.c: Executing [[email protected]:14] Return(“SIP/fpbx-1-3z9VxtkEkJWG-00000008”, “”) in new stack
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] app_stack.c: Spawn extension (from-pstn, 9708462745, 1) exited non-zero on ‘SIP/fpbx-1-3z9VxtkEkJWG-00000008’
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] app_stack.c: SIP/fpbx-1-3z9VxtkEkJWG-00000008 Internal Gosub(func-apply-sipheaders,s,1(1)) complete GOSUB_RETVAL=
[2020-09-26 11:13:18] VERBOSE[10230][C-0000001b] app_dial.c: Called SIP/fpbx-1-3z9VxtkEkJWG/9708462745
[2020-09-26 11:13:19] VERBOSE[10230][C-0000001b] app_dial.c: SIP/fpbx-1-3z9VxtkEkJWG-00000008 is making progress passing it to PJSIP/101-0000001a
[2020-09-26 11:13:21] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:21.814-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e5c0012c0”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46674”,UsingPassword=“0”,SessionTV=“2020-09-26T11:13:21.814-0600”
[2020-09-26 11:13:25] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:25.211-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e580035e0”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46682”,UsingPassword=“0”,SessionTV=“2020-09-26T11:13:25.211-0600”
[2020-09-26 11:13:26] VERBOSE[10230][C-0000001b] app_dial.c: SIP/fpbx-1-3z9VxtkEkJWG-00000008 answered PJSIP/101-0000001a
[2020-09-26 11:13:26] VERBOSE[10321][C-0000001b] bridge_channel.c: Channel SIP/fpbx-1-3z9VxtkEkJWG-00000008 joined ‘simple_bridge’ basic-bridge
[2020-09-26 11:13:26] VERBOSE[10230][C-0000001b] bridge_channel.c: Channel PJSIP/101-0000001a joined ‘simple_bridge’ basic-bridge
[2020-09-26 11:13:34] SECURITY[2544] res_security_log.c: SecurityEvent=“ChallengeSent”,EventTV=“2020-09-26T11:13:34.785-0600”,Severity=“Informational”,Service=“PJSIP”,EventVersion=“1”,AccountID=“101”,SessionID="[email protected]",LocalAddress=“IPV4/UDP/192.168.5.25/5060”,RemoteAddress=“IPV4/UDP/192.168.5.26/5060”,Challenge=""
[2020-09-26 11:13:34] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:34.795-0600”,Severity=“Informational”,Service=“PJSIP”,EventVersion=“1”,AccountID=“101”,SessionID="[email protected]",LocalAddress=“IPV4/UDP/192.168.5.25/5060”,RemoteAddress=“IPV4/UDP/192.168.5.26/5060”,UsingPassword=“1”
[2020-09-26 11:13:34] VERBOSE[2488] pbx_variables.c: Setting global variable ‘SIPDOMAIN’ to ‘192.168.5.25’
[2020-09-26 11:13:34] VERBOSE[2488] netsock2.c: Using SIP RTP Audio TOS bits 184
[2020-09-26 11:13:34] VERBOSE[2488] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2020-09-26 11:13:34] VERBOSE[2488] netsock2.c: Using SIP RTP Audio CoS mark 5
[2020-09-26 11:13:34] VERBOSE[10322][C-0000001c] pbx.c: Executing [[email protected]:1] Park(“PJSIP/101-0000001b”, “”) in new stack
[2020-09-26 11:13:34] VERBOSE[10322][C-0000001c] parking/parking_bridge.c: Parking ‘PJSIP/101-0000001b’ in ‘default’ at space 71
[2020-09-26 11:13:34] VERBOSE[10322][C-0000001c] bridge_channel.c: Channel PJSIP/101-0000001b joined ‘holding_bridge’ parking-bridge
[2020-09-26 11:13:34] VERBOSE[10322][C-0000001c] file.c: <PJSIP/101-0000001b> Playing ‘digits/7.ulaw’ (language ‘en’)
[2020-09-26 11:13:35] VERBOSE[10322][C-0000001c] file.c: <PJSIP/101-0000001b> Playing ‘digits/1.ulaw’ (language ‘en’)
[2020-09-26 11:13:36] VERBOSE[10322][C-0000001c] res_musiconhold.c: Started music on hold, class ‘default’, on channel ‘PJSIP/101-0000001b’
[2020-09-26 11:13:50] SECURITY[2544] res_security_log.c: SecurityEvent=“ChallengeSent”,EventTV=“2020-09-26T11:13:50.064-0600”,Severity=“Informational”,Service=“PJSIP”,EventVersion=“1”,AccountID=“101”,SessionID="[email protected]",LocalAddress=“IPV4/UDP/192.168.5.25/5060”,RemoteAddress=“IPV4/UDP/192.168.5.26/5060”,Challenge=""
[2020-09-26 11:13:50] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:50.075-0600”,Severity=“Informational”,Service=“PJSIP”,EventVersion=“1”,AccountID=“101”,SessionID="[email protected]",LocalAddress=“IPV4/UDP/192.168.5.25/5060”,RemoteAddress=“IPV4/UDP/192.168.5.26/5060”,UsingPassword=“1”
[2020-09-26 11:13:50] VERBOSE[2488] pbx_variables.c: Setting global variable ‘SIPDOMAIN’ to ‘192.168.5.25’
[2020-09-26 11:13:50] VERBOSE[2488] netsock2.c: Using SIP RTP Audio TOS bits 184
[2020-09-26 11:13:50] VERBOSE[2488] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2020-09-26 11:13:50] VERBOSE[2488] netsock2.c: Using SIP RTP Audio CoS mark 5
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:1] Macro(“PJSIP/101-0000001c”, “parked-call,71,default”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:1] Macro(“PJSIP/101-0000001c”, “user-callerid,”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:1] Set(“PJSIP/101-0000001c”, “TOUCH_MONITOR=1601140430.37”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:2] Set(“PJSIP/101-0000001c”, “AMPUSER=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:3] Set(“PJSIP/101-0000001c”, “HOTDESCKCHAN=101-0000001c”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:4] Set(“PJSIP/101-0000001c”, “HOTDESKEXTEN=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:5] Set(“PJSIP/101-0000001c”, “HOTDESKCALL=0”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:6] ExecIf(“PJSIP/101-0000001c”, “0?Set(HOTDESKCALL=1)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:7] ExecIf(“PJSIP/101-0000001c”, “0?Set(CALLERID(name)=)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:8] GotoIf(“PJSIP/101-0000001c”, “0?report”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:9] ExecIf(“PJSIP/101-0000001c”, “1?Set(REALCALLERIDNUM=101)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:10] Set(“PJSIP/101-0000001c”, “AMPUSER=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:11] GotoIf(“PJSIP/101-0000001c”, “0?limit”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:12] Set(“PJSIP/101-0000001c”, “AMPUSERCIDNAME=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:13] ExecIf(“PJSIP/101-0000001c”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:14] GotoIf(“PJSIP/101-0000001c”, “0?report”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:15] Set(“PJSIP/101-0000001c”, “AMPUSERCID=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:16] Set(“PJSIP/101-0000001c”, “__DIAL_OPTIONS=HhTtr”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:17] Set(“PJSIP/101-0000001c”, “CALLERID(all)=“101” <101>”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:18] ExecIf(“PJSIP/101-0000001c”, “0?Set(CUSDIAL=)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:19] ExecIf(“PJSIP/101-0000001c”, “0?Set(CALLERID(all)=“101” <101>)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:20] GotoIf(“PJSIP/101-0000001c”, “0?limit”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:21] ExecIf(“PJSIP/101-0000001c”, “0?Set(GROUP(concurrency_limit)=101)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:22] ExecIf(“PJSIP/101-0000001c”, “0?Set(CHANNEL(language)=)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:23] NoOp(“PJSIP/101-0000001c”, “Macro Depth is 2”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:24] GotoIf(“PJSIP/101-0000001c”, “1?report2:macroerror”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (macro-user-callerid,s,25)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:25] GotoIf(“PJSIP/101-0000001c”, “0?continue”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:26] ExecIf(“PJSIP/101-0000001c”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:27] Set(“PJSIP/101-0000001c”, “__TTL=64”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:28] GotoIf(“PJSIP/101-0000001c”, “1?continue”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (macro-user-callerid,s,44)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:44] Set(“PJSIP/101-0000001c”, “CALLERID(number)=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:45] Set(“PJSIP/101-0000001c”, “CALLERID(name)=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:46] GotoIf(“PJSIP/101-0000001c”, “0?cnum”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:47] Set(“PJSIP/101-0000001c”, “CDR(cnam)=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:48] Set(“PJSIP/101-0000001c”, “CDR(cnum)=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:49] Set(“PJSIP/101-0000001c”, “CHANNEL(language)=en”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:2] Gosub(“PJSIP/101-0000001c”, “sub-record-check,s,1(parking,101,101)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:1] GotoIf(“PJSIP/101-0000001c”, “0?initialized”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:2] Set(“PJSIP/101-0000001c”, “__REC_STATUS=INITIALIZED”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:3] Set(“PJSIP/101-0000001c”, “NOW=1601140430”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:4] Set(“PJSIP/101-0000001c”, “__DAY=26”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:5] Set(“PJSIP/101-0000001c”, “__MONTH=09”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:6] Set(“PJSIP/101-0000001c”, “__YEAR=2020”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:7] Set(“PJSIP/101-0000001c”, “__TIMESTR=20200926-111350”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:8] Set(“PJSIP/101-0000001c”, “__FROMEXTEN=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:9] Set(“PJSIP/101-0000001c”, “__MON_FMT=wav”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:10] NoOp(“PJSIP/101-0000001c”, “Recordings initialized”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:11] ExecIf(“PJSIP/101-0000001c”, “0?Set(ARG3=dontcare)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:12] Set(“PJSIP/101-0000001c”, “REC_POLICY_MODE_SAVE=”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:13] ExecIf(“PJSIP/101-0000001c”, “0?Set(REC_STATUS=NO)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:14] GotoIf(“PJSIP/101-0000001c”, “7?checkaction”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (sub-record-check,s,17)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:17] GotoIf(“PJSIP/101-0000001c”, “1?sub-record-check,parking,1”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (sub-record-check,parking,1)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:1] NoOp(“PJSIP/101-0000001c”, “User 101 picked up a parked call”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:2] Set(“PJSIP/101-0000001c”, “USER=101”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:3] ExecIf(“PJSIP/101-0000001c”, “0?Set(USER=unknown)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:4] Set(“PJSIP/101-0000001c”, “RECMODE=dontcare”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:5] ExecIf(“PJSIP/101-0000001c”, “0?Set(RECMODE=dontcare)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:6] Gosub(“PJSIP/101-0000001c”, “recordcheck,1(dontcare,parked,101)”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:1] NoOp(“PJSIP/101-0000001c”, “Starting recording check against dontcare”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:2] Goto(“PJSIP/101-0000001c”, “dontcare”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:3] Return(“PJSIP/101-0000001c”, “”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:7] Return(“PJSIP/101-0000001c”, “”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:3] NoOp(“PJSIP/101-0000001c”, "PARKRETURNTO: ") in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:4] GotoIf(“PJSIP/101-0000001c”, “0?backtosender”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:5] GotoIf(“PJSIP/101-0000001c”, “0?attemptpark”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:6] AGI(“PJSIP/101-0000001c”, “agi://127.0.0.1/parkfetch.agi,71,default”) in new stack
[2020-09-26 11:13:50] SECURITY[2544] res_security_log.c: SecurityEvent=“SuccessfulAuth”,EventTV=“2020-09-26T11:13:50.365-0600”,Severity=“Informational”,Service=“AMI”,EventVersion=“1”,AccountID=“admin”,SessionID=“0x7f3e68001310”,LocalAddress=“IPV4/TCP/0.0.0.0/5038”,RemoteAddress=“IPV4/TCP/127.0.0.1/46690”,UsingPassword=“0”,SessionTV=“2020-09-26T11:13:50.365-0600”
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] res_agi.c: agi://127.0.0.1/parkfetch.agi,71,default: Found slot full with channel [PJSIP/101-0000001b]
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] res_agi.c: <PJSIP/101-0000001c>AGI Script agi://127.0.0.1/parkfetch.agi completed, returning 0
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:7] GotoIf(“PJSIP/101-0000001c”, “1?next”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (macro-parked-call,s,9)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:9] Set(“PJSIP/101-0000001c”, “CCSS_SETUP=TRUE”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:10] GotoIf(“PJSIP/101-0000001c”, “1?pcall”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx_builtins.c: Goto (macro-parked-call,s,17)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:17] NoOp(“PJSIP/101-0000001c”, “User: “101” <101> attempting to pick up Parked Call Slot 71”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:18] NoOp(“PJSIP/101-0000001c”, “PARKIE: PJSIP/101-0000001b”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:19] Set(“PJSIP/101-0000001c”, “SHARED(PARKRETURNTO,PJSIP/101-0000001b)=”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:20] Set(“PJSIP/101-0000001c”, “PARKOWNER=1”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] pbx.c: Executing [[email protected]:21] ParkedCall(“PJSIP/101-0000001c”, “default,71”) in new stack
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] bridge_channel.c: Channel PJSIP/101-0000001b left ‘holding_bridge’ parking-bridge
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] res_musiconhold.c: Stopped music on hold on PJSIP/101-0000001b
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] bridge_channel.c: Channel PJSIP/101-0000001b joined ‘simple_bridge’ basic-bridge <4d37a017-18cd-43ee-bd8c-962ac044d56e>
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] file.c: <PJSIP/101-0000001c> Playing ‘beep.ulaw’ (language ‘en’)
[2020-09-26 11:13:50] VERBOSE[10322][C-0000001c] file.c: <PJSIP/101-0000001b> Playing ‘beep.ulaw’ (language ‘en’)
[2020-09-26 11:13:50] VERBOSE[10323][C-0000001d] bridge_channel.c: Channel PJSIP/101-0000001c joined ‘simple_bridge’ basic-bridge <4d37a017-18cd-43ee-bd8c-962ac044d56e>

watersong · September 26, 2020, 6:58pm

working my way through this … found *270 will send the call into the parking lot properly … When I go to retrieve I hear a beep a 5 second delay then another beep before the call is resumed from the parking lot. Need to eliminate that delay.

Stewart1 · September 26, 2020, 7:08pm

Park a call, then retrieve it by dialing 71. Paste the Asterisk log, starting with the line containing
Executing [[email protected]:1]
at pastebin.freepbx.org and post the link here.

watersong · September 27, 2020, 4:53pm

https://pastebin.freepbx.org/view/b35b7fb8

What I can do, I can answer calls from 3 diff. w56h phones and transfer them to any extension. I can check voicemail on ext. 101 from any of the phones using *97 and *98101

Things I want to do:

be able to use the call park in the w56h / w60b call park settings menu. *270 does work, running through variations of ##270 #70# #270# ##270# … not sure if I need to change a dss key or not. Retrieving a call is easy with 71 as I will not have more than 1 parked call
retrieve a parked call without a 5 second delay
when i hang up the w56h @ 10:37:35 it did not issue a hangup request, at 10:37:47 I hung up the called number (my cell phone) … some reading points to and ‘End’ soft button but that is not on the w56h

thank you

Stewart1 · September 27, 2020, 6:22pm

The attended transfer somehow did not complete until after a timeout.

Please try these options. I hope that one will avoid the delay.

To park, dial *271, hear hold music, hang up. To retrieve, dial 71, press Send.
To park, press Transfer, dial 71, press Transfer, hang up. To retrieve, dial 71, press Send.
To park, press Transfer, dial 71, press Send, hang up. To retrieve, dial 71, press Send.

watersong · September 27, 2020, 7:13pm

*271 worked, if quick enough, to park the call on 71. I could hear the hold music on both sides before hanging up the yeahlink, still 5 second delay retrieving
transfer button, 71, send = i’m sorry, there is no one parked at that extension
transfer button, 71 transfer = silence on cell, and the yeahlink acts like the call is over … cell phone is droped (for lack of audio RTP activity in 30 seconds) as if the call is in limbo

flashed firmware twice and all is well

system · October 4, 2020, 7:13pm

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.