Paging not working with 2.3.1

I just installed PBX-in-a-flash and have 2 working Grandstream 2000 phones connected. Both grandstreams are set to auto answer if the SIP header is sent.

I created a paging group, and both extensions are added. When I dial the ext to page, I hear the beep, but the other extension does not receive the page.

Here is the log - the paging ext is 1000 and the other extension is 1008:

– Executing [[email protected]:1] Set(“SIP/1000-0909c8d0”, “_FORCE_PAGE=0” ) in new stack
– Executing [[email protected]:2] Macro(“SIP/1000-0909c8d0”, “user-calleri d|”) in new stack
– Executing [[email protected]:1] NoOp(“SIP/1000-0909c8d0”, “user-calle rid: device 1000”) in new stack
– Executing [[email protected]:2] Set(“SIP/1000-0909c8d0”, “AMPUSER=100 0”) in new stack
– Executing [[email protected]:3] GotoIf(“SIP/1000-0909c8d0”, "0?report ") in new stack
– Executing [[email protected]:4] GotoIf(“SIP/1000-0909c8d0”, “0?start” ) in new stack
– Executing [[email protected]:5] Set(“SIP/1000-0909c8d0”, “REALCALLERI DNUM=1000”) in new stack
– Executing [[email protected]:6] NoOp(“SIP/1000-0909c8d0”, “REALCALLER IDNUM is 1000”) in new stack
– Executing [[email protected]:7] Set(“SIP/1000-0909c8d0”, “AMPUSER=100 0”) in new stack
– Executing [[email protected]:8] Set(“SIP/1000-0909c8d0”, “AMPUSERCIDN AME=Reception”) in new stack
– Executing [[email protected]:9] GotoIf(“SIP/1000-0909c8d0”, "0?report ") in new stack
– Executing [[email protected]:10] Set(“SIP/1000-0909c8d0”, “AMPUSERCID =1000”) in new stack
– Executing [[email protected]:11] Set(“SIP/1000-0909c8d0”, “CALLERID(a ll)=“Reception” <1000>”) in new stack
– Executing [[email protected]:12] Set(“SIP/1000-0909c8d0”, “REALCALLER IDNUM=1000”) in new stack
– Executing [[email protected]:13] NoOp(“SIP/1000-0909c8d0”, "TTL: ARG 1: ") in new stack
– Executing [[email protected]:14] GotoIf(“SIP/1000-0909c8d0”, “0?conti nue”) in new stack
– Executing [[email protected]:15] Set(“SIP/1000-0909c8d0”, “__TTL=64”) in new stack
– Executing [[email protected]:16] GotoIf(“SIP/1000-0909c8d0”, “1?conti nue”) in new stack
– Goto (macro-user-callerid,s,23)
– Executing [[email protected]:23] NoOp(“SIP/1000-0909c8d0”, “Using Cal lerID “Reception” <1000>”) in new stack
– Executing [[email protected]:3] Set(“SIP/1000-0909c8d0”, “_AMPUSER=1000” ) in new stack
– Executing [[email protected]:4] Page(“SIP/1000-0909c8d0”, “LOCAL/[email protected] t-paging”) in new stack
– Called [email protected]
– <SIP/1000-0909c8d0> Playing ‘beep’ (language ‘en’)
– Executing [[email protected]:1] GotoIf(“Local/[email protected],2”, “0?s kipself”) in new stack
– Executing [[email protected]:2] GotoIf(“Local/[email protected],2”, “1?A VAIL”) in new stack
– Goto (ext-paging,PAGE,5)
– Executing [[email protected]:5] ChanIsAvail(“Local/[email protected],2”, “|js”) in new stack
== Spawn extension (ext-paging, PAGE, 5) exited non-zero on ‘Local/[email protected] ging-4695,2’
– Created MeetMe conference 1020 for conference ‘1952593502d’
– Hungup ‘Zap/pseudo-1299208976’
== Spawn extension (from-internal, 7243, 4) exited non-zero on ‘SIP/1000-0909c 8d0’
– Executing [[email protected]:1] Macro(“SIP/1000-0909c8d0”, “hangupcall”) in new stack
– Executing [[email protected]:1] ResetCDR(“SIP/1000-0909c8d0”, “w”) in ne w stack
– Executing [[email protected]:2] NoCDR(“SIP/1000-0909c8d0”, “”) in new st ack
– Executing [[email protected]:3] GotoIf(“SIP/1000-0909c8d0”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing [[email protected]:6] GotoIf(“SIP/1000-0909c8d0”, "1?skipblkvm ") in new stack
– Goto (macro-hangupcall,s,9)
– Executing [[email protected]:9] GotoIf(“SIP/1000-0909c8d0”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,11)
– Executing [[email protected]:11] Hangup(“SIP/1000-0909c8d0”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/1000-0909 c8d0’ in macro ‘hangupcall’
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/1000-0909 c8d0’