Outgoing call error message without area code

My freepbx system just started giving me the following message when I try and dial a 7 digit phone number. This has never happened before and I have added the proper area code etc. in the dial plan for a 7 digit number. I am running Freepbx 2.11, Asterisk 11.5.1 and the latest firmware. I have upgraded all modules as well.

The message I receive is “The number is not answering” then a series of short beeps.

Here is the log file:

new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:22] Goto(“SIP/200-000000c5”, “out,1”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Goto (sub-record-check,out,1)
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/200-000000c5”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:2] GosubIf(“SIP/200-000000c5”, “0?record,1(exten,4851700,200)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:3] Return(“SIP/200-000000c5”, “”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:6] Macro(“SIP/200-000000c5”, “dialout-trunk,3,16164851700,off”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:1] Set(“SIP/200-000000c5”, “DIAL_TRUNK=3”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:2] GosubIf(“SIP/200-000000c5”, “0?sub-pincheck,s,1()”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/200-000000c5”, “0?disabletrunk,1”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:4] Set(“SIP/200-000000c5”, “DIAL_NUMBER=16164851700”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:5] Set(“SIP/200-000000c5”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:6] Set(“SIP/200-000000c5”, “OUTBOUND_GROUP=OUT_3”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/200-000000c5”, “1?nomax”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/200-000000c5”, “0?skipoutcid”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:10] Set(“SIP/200-000000c5”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:11] Macro(“SIP/200-000000c5”, “outbound-callerid,3”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/200-000000c5”, “0?Set(CALLERPRES()=)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:2] ExecIf(“SIP/200-000000c5”, “0?Set(REALCALLERIDNUM=200)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/200-000000c5”, “1?normcid”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:6] Set(“SIP/200-000000c5”, “USEROUTCID=6164851700”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:7] Set(“SIP/200-000000c5”, “EMERGENCYCID=”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:8] Set(“SIP/200-000000c5”, “TRUNKOUTCID=6169575500”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/200-000000c5”, “1?trunkcid”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Goto (macro-outbound-callerid,s,14)
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:14] ExecIf(“SIP/200-000000c5”, “1?Set(CALLERID(all)=6169575500)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/200-000000c5”, “1?Set(CALLERID(all)=6164851700)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/200-000000c5”, “0?Set(CALLERID(all)=)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:17] ExecIf(“SIP/200-000000c5”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:18] Set(“SIP/200-000000c5”, “CDR(outbound_cnum)=6164851700”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:19] Set(“SIP/200-000000c5”, “CDR(outbound_cnam)=”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:12] GosubIf(“SIP/200-000000c5”, “0?sub-flp-3,s,1()”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:13] Set(“SIP/200-000000c5”, “OUTNUM=16164851700”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:14] Set(“SIP/200-000000c5”, “custom=SIP/Flowroute”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/200-000000c5”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/200-000000c5”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:17] Macro(“SIP/200-000000c5”, “dialout-trunk-predial-hook,”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:1] MacroExit(“SIP/200-000000c5”, “”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:18] GotoIf(“SIP/200-000000c5”, “0?bypass,1”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:19] ExecIf(“SIP/200-000000c5”, “1?Set(CONNECTEDLINE(num,i)=16164851700)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:20] ExecIf(“SIP/200-000000c5”, “1?Set(CONNECTEDLINE(name,i)=CID:6164851700)”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:21] GotoIf(“SIP/200-000000c5”, “0?customtrunk”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:22] Dial(“SIP/200-000000c5”, “SIP/Flowroute/16164851700,300,Tt”) in new stack
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] netsock2.c: == Using SIP RTP TOS bits 184
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] netsock2.c: == Using SIP RTP CoS mark 5
[2013-09-27 09:08:27] VERBOSE[2790][C-00000173] app_dial.c: – Called SIP/Flowroute/16164851700
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:23] NoOp(“SIP/200-000000c5”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 18”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:24] GotoIf(“SIP/200-000000c5”, “0?continue,1:s-CHANUNAVAIL,1”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]dialout-trunk:1] Set(“SIP/200-000000c5”, “RC=18”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:2] Goto(“SIP/200-000000c5”, “18,1”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Goto (macro-dialout-trunk,18,1)
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:1] Goto(“SIP/200-000000c5”, “s-NOANSWER,1”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Goto (macro-dialout-trunk,s-NOANSWER,1)
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:1] NoOp(“SIP/200-000000c5”, “Dial failed due to trunk reporting NOANSWER - giving up”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:2] Progress(“SIP/200-000000c5”, “”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:3] Playback(“SIP/200-000000c5”, “number-not-answering,noanswer”) in new stack
[2013-09-27 09:08:28] VERBOSE[2790][C-00000173] file.c: – <SIP/200-000000c5> Playing ‘number-not-answering.ulaw’ (language ‘en’)
[2013-09-27 09:08:30] VERBOSE[2790][C-00000173] pbx.c: – Executing [[email protected]:4] Congestion(“SIP/200-000000c5”, “20”) in new stack
[2013-09-27 09:08:30] WARNING[2790][C-00000173] channel.c: Prodding channel ‘SIP/200-000000c5’ failed
[2013-09-27 09:08:30] VERBOSE[2790][C-00000173] app_macro.c: == Spawn extension (macro-dialout-trunk, s-NOANSWER, 4) exited non-zero on ‘SIP/200-000000c5’ in macro ‘dialout-trunk’
[2013-09-27 09:08:30] VERBOSE[2790][C-00000173] pbx.c: == Spawn extension (outbound-allroutes, 4851700, 6) exited non-zero on ‘SIP/200-000000c5’

Any help would be appreciated.

strange it now is no longer having an issue.