I have a client with an existing, proprietary phone system using port 5060.
They are interested in trying-out an FreePBX system.
So I downloaded and setup FreePBX yesterday, and saw SIP is set to 5160 and PJSIP is set to 5060. This may work out well for me, as I can leave the existing system alone and setup this 2nd “demo” system and run SIP @ 5160 (so both phone systems can coexist on the same network).
So I create a SIP extension and specify the port as 5160. I install OSS Endpoint Manager and install the phones (Grandstream 2160) and create the config files, and it is using 5060. I don’t see any way to get Endpoint Manager to use the default 5160 of the SIP driver.
So I figure I’ll change PJSIP to 5070, reboot the machine, create a 2nd (PJSIP this time though) extension and fine there is no place to specify a port in the PJSIP extension configuration. I figure maybe OSS EPM automatically uses whatever my PJSIP is set to so I create my configuration files via OSS EPM and sure enough, still 5060.
So my question is, is there a way to get OSS EPM to specify a different port for phone registration?
Am I asking in the right place?
I’d try the commercial version of EPM but this is all a spec. job, I don’t know if they’re going to want to switch so I figured I’d start with OSS EPM because it is free.