You still have a problem with your Outbound Route – there was no match for 48222115800.
For testing, try setting an Outbound Route with
prepend: (leave blank)
prefix: (leave blank)
match pattern: X.
CallerID: (leave blank)
This will match any number you dial and send it unchanged.
Then, try dialing 222115800 as well as 48222115800
There also seem to be problems with your trunk settings. Assuming that the instructions from neofon in this thread are still accurate:
Try using these settings for your trunk (my reply in that thread is obsolete, because an Auth username setting has been added to FreePBX):
Username: 48757462894
Auth username: [email protected]
Secret: (password supplied by Neofon)
SIP Server: neofon.tp.pl
SIP Server Port: 5060
Contact User: 48757462894
From Domain: neofon.tp.pl
From User: 48757462894
Client URI: (leave blank)
Server URI: (leave blank)
If the Neofon instructions have changed, or if you have it working with a softphone or a different PBX, please explain.
If the trunk does not register with above settings, paste a log of a registration attempt and associated replies.
Also, there seems to be a discrepancy between the public IP address configured in Asterisk and the one seen by Neofon:
See line 200 of the log, which shows:
140284 Via: SIP/2.0/UDP 83.27.125.87:5060;received=83.10.224.65;branch=z9hG4bKPj169ca091-f84f-4d43-9f40-887d734320b1;rport=3896
Confirm that External Address in Asterisk SIP Settings matches the WAN IP address of your router, and what you see when visiting whatismyip.com . If the latter two are different, please explain.
If the trunk is registered ok but still can’t make calls, paste a new log.
If inbound is still failing: What, if anything, appears in the Asterisk log on an attempted call? If nothing, what, if anything, appears in sngrep? If also nothing, post details of router/firewall. If it doesn’t have a public IPv4 address on its WAN interface, please explain.