No audio to external extentions on ringlists

HI all.

I have a ringlist that includes internal and external numbers that activates when there is an incoming call.
Unfortuneatly, audio is not sent to any external numbers on the list.

The external phones ring, such as a cell phone, but when you answer it, you cannot hear the caller.

There are always two obvious culprits in one-way audio situations like this:

  1. NAT traversal problems. This requires you to look at and understand how your NAT is set up with regard to your external users. Note that this doesn’t always mean NAT to the server end - if the recipient end is using NAT, things can get just as hinky. You have to look at the entire call chain.

  2. CODEC problems. If your external numbers only use a certain CODEC (G792-GXW, something I just made up for the example) and the rest of the phones in your ring group use a different CODEC (G711, for example), you can get dead air on the external phones. Note that this problem will sometimes “solve itself” after a few dozen seconds.

Let us know what you find as you look at it. There were a few threads about something a little like this a couple months ago (six weeks maybe) and there was a module update that fixed it. You might need to jump onto “the edge” and update everything, then drop back off the edge if it works.

heres my log.

I had a look at the item you suggested. unfortunately no luck - still looking

heres the last few lines

[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:11] ExecIf(“Local/[email protected];2”, “0?Set(ARG3=dontcare)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:12] Set(“Local/[email protected];2”, “REC_POLICY_MODE_SAVE=FORCE”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “DIAL_TRUNK=2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:13] ExecIf(“Local/[email protected]-internal-00002013;2”, “0?Set(REC_STATUS=NO)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:14] GotoIf(“Local/[email protected];2”, “3?checkaction”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (sub-record-check,s,17)
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:17] GotoIf(“Local/[email protected];2”, “1?sub-record-check,out,1”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:2] GosubIf(“Local/[email protected];2”, “0?sub-pincheck,s,1()”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (sub-record-check,out,1)
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:1] NoOp(“Local/[email protected];2”, “Outbound Recording Check from 64248029 to 094467786”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?disabletrunk,1”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];2”, “RECMODE=”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “DIAL_NUMBER=0406586592”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:3] ExecIf(“Local/[email protected];2”, “1?Goto(routewins)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (sub-record-check,out,7)
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:7] Gosub(“Local/[email protected];2”, “recordcheck,1(force,out,094467786)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20981][C-00002041] app_mixmonitor.c: == Begin MixMonitor Recording Local/[email protected];2
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:6] Set(“Local/[email protected];2”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:1] NoOp(“Local/[email protected];2”, “Starting recording check against force”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “1?nomax”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:2] Goto(“Local/[email protected];2”, “force”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (sub-record-check,recordcheck,5)
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “__REC_POLICY_MODE=FORCE”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “0?skipoutcid”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:6] GotoIf(“Local/[email protected];2”, “1?startrec”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (sub-record-check,recordcheck,16)
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:16] NoOp(“Local/[email protected];2”, “Starting recording: out, 094467786”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:17] Set(“Local/[email protected];2”, “AUDIOHOOK_INHERIT(MixMonitor)=yes”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:18] Set(“Local/[email protected];2”, “__CALLFILENAME=out-094467786-64248029-20160814-152715-1471159635.16615”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:10] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:19] MixMonitor(“Local/[email protected];2”, “2016/08/14/out-094467786-64248029-20160814-152715-1471159635.16615.wav,ai(LOCAL_MIXMON_ID),”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:11] Macro(“Local/[email protected];2”, “outbound-callerid,2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:20] Set(“Local/[email protected];2”, “__MIXMON_ID=0x7f375002f150”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:1] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:21] Set(“Local/[email protected];2”, “__RECORD_ID=Local/[email protected];2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:22] Set(“Local/[email protected];2”, “__REC_STATUS=RECORDING”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:2] ExecIf(“Local/[email protected];2”, “0?Set(REALCALLERIDNUM=64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:23] Set(“Local/[email protected];2”, “CDR(recordingfile)=out-094467786-64248029-20160814-152715-1471159635.16615.wav”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:24] Return(“Local/[email protected];2”, “”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?normcid”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “USEROUTCID=64248029”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:8] Return(“Local/[email protected];2”, “”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:3] ExecIf(“Local/[email protected];2”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “1?bypass”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Goto (macro-outbound-callerid,s,7)
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected]00002012;2”, “EMERGENCYCID=”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:8] Set(“Local/[email protected];2”, “TRUNKOUTCID=64248029”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “1?trunkcid”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Goto (macro-outbound-callerid,s,14)
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:14] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “MOHCLASS=default”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?Set(CALLERID(all)=)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “_NODEST=”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:6] Macro(“Local/[email protected];2”, “dialout-trunk,2,94467786,off”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:17] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:18] Set(“Local/[email protected];2”, “CDR(outbound_cnum)=64248029”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:19] Set(“Local/[email protected];2”, “CDR(outbound_cnam)=”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “DIAL_TRUNK=2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:2] GosubIf(“Local/[email protected];2”, “0?sub-pincheck,s,1()”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:12] GosubIf(“Local/[email protected];2”, “0?sub-flp-2,s,1()”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:13] Set(“Local/[email protected];2”, “OUTNUM=0406586592”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?disabletrunk,1”) in new stack
[2016-08-14 15:27:15] VERBOSE[20982][C-00002041] app_mixmonitor.c: == Begin MixMonitor Recording Local/[email protected];2
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:14] Set(“Local/[email protected];2”, “custom=SIP/71914448”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “DIAL_NUMBER=94467786”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:6] Set(“Local/[email protected];2”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “1?nomax”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:17] Macro(“Local/[email protected];2”, “dialout-trunk-predial-hook,”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “0?skipoutcid”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:10] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:1] MacroExit(“Local/[email protected];2”, “”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:11] Macro(“Local/[email protected];2”, “outbound-callerid,2”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:18] GotoIf(“Local/[email protected];2”, “0?bypass,1”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:19] ExecIf(“Local/[email protected];2”, “0?Set(CONNECTEDLINE(num,i)=0406586592)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:1] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:20] ExecIf(“Local/[email protected];2”, “0?Set(CONNECTEDLINE(name,i)=CID:64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:2] ExecIf(“Local/[email protected];2”, “0?Set(REALCALLERIDNUM=64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?normcid”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:21] GotoIf(“Local/[email protected];2”, “0?customtrunk”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “USEROUTCID=64248029”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:22] Dial(“Local/[email protected];2”, “SIP/71914448/0406586592,300,Tt”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “1?bypass”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (macro-outbound-callerid,s,7)
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected]rom-internal-00002013;2”, “EMERGENCYCID=”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:8] Set(“Local/[email protected];2”, “TRUNKOUTCID=64248029”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “1?trunkcid”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Goto (macro-outbound-callerid,s,14)
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:14] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?Set(CALLERID(all)=)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] netsock2.c: == Using SIP RTP TOS bits 184
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] netsock2.c: == Using SIP RTP CoS mark 5
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:17] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:18] Set(“Local/[email protected];2”, “CDR(outbound_cnum)=64248029”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:19] Set(“Local/[email protected];2”, “CDR(outbound_cnam)=”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:12] GosubIf(“Local/[email protected];2”, “0?sub-flp-2,s,1()”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:13] Set(“Local/[email protected];2”, “OUTNUM=94467786”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:14] Set(“Local/[email protected];2”, “custom=SIP/71914448”) in new stack
[2016-08-14 15:27:15] VERBOSE[20979][C-00002041] app_dial.c: – Called SIP/71914448/0406586592
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:17] Macro(“Local/[email protected];2”, “dialout-trunk-predial-hook,”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:1] MacroExit(“Local/[email protected];2”, “”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:18] GotoIf(“Local/[email protected];2”, “0?bypass,1”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:19] ExecIf(“Local/[email protected];2”, “0?Set(CONNECTEDLINE(num,i)=94467786)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:20] ExecIf(“Local/[email protected];2”, “0?Set(CONNECTEDLINE(name,i)=CID:64248029)”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:21] GotoIf(“Local/[email protected];2”, “0?customtrunk”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] pbx.c: – Executing [[email protected]:22] Dial(“Local/[email protected];2”, “SIP/71914448/94467786,300,Tt”) in new stack
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] netsock2.c: == Using SIP RTP TOS bits 184
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] netsock2.c: == Using SIP RTP CoS mark 5
[2016-08-14 15:27:15] VERBOSE[20980][C-00002041] app_dial.c: – Called SIP/71914448/94467786
[2016-08-14 15:27:15] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2002-000000bb connected line has changed. Saving it until answer for SIP/71914448-000000b6
[2016-08-14 15:27:15] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2002-000000bb is ringing
[2016-08-14 15:27:15] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2001-000000ba is ringing
[2016-08-14 15:27:15] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2000-000000b9 is ringing
[2016-08-14 15:27:16] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2004-000000bd is ringing
[2016-08-14 15:27:16] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2003-000000bc is ringing
[2016-08-14 15:27:16] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2009-000000bf connected line has changed. Saving it until answer for SIP/71914448-000000b6
[2016-08-14 15:27:16] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2009-000000bf is ringing
[2016-08-14 15:27:16] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2006-000000be connected line has changed. Saving it until answer for SIP/71914448-000000b6
[2016-08-14 15:27:16] VERBOSE[20961][C-00002041] app_dial.c: – SIP/2006-000000be is ringing
[2016-08-14 15:27:17] VERBOSE[20980][C-00002041] app_dial.c: – SIP/71914448-000000c1 is making progress passing it to Local/[email protected];2
[2016-08-14 15:27:17] VERBOSE[20961][C-00002041] app_dial.c: – Local/[email protected];1 is making progress passing it to SIP/71914448-000000b6
[2016-08-14 15:27:17] VERBOSE[20979][C-00002041] app_dial.c: – SIP/71914448-000000c0 is making progress passing it to Local/[email protected];2
[2016-08-14 15:27:17] VERBOSE[20961][C-00002041] app_dial.c: – Local/[email protected];1 is making progress passing it to SIP/71914448-000000b6
[2016-08-14 15:27:24] VERBOSE[20980][C-00002041] app_dial.c: – SIP/71914448-000000c1 answered Local/[email protected];2
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] app_dial.c: – Local/[email protected];1 answered SIP/71914448-000000b6
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “__MACRO_RESULT=”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “CFIGNORE=”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:3] Set(“Local/[email protected];1”, “MASTER_CHANNEL(CFIGNORE)=”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];1”, “FORWARD_CONTEXT=from-internal”) in new stack
[2016-08-14 15:27:24] VERBOSE[20979][C-00002041] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 22) exited non-zero on ‘Local/[email protected];2’ in macro ‘dialout-trunk’
[2016-08-14 15:27:24] VERBOSE[20979][C-00002041] pbx.c: == Spawn extension (from-internal, 00406586592, 6) exited non-zero on ‘Local/[email protected];2’
[2016-08-14 15:27:24] VERBOSE[20979][C-00002041] pbx.c: – Executing [[email protected]:1] Hangup(“Local/[email protected]ernal-00002012;2”, “”) in new stack
[2016-08-14 15:27:24] VERBOSE[20979][C-00002041] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘Local/[email protected];2’
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];1”, “MASTER_CHANNEL(FORWARD_CONTEXT)=from-internal”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:6] Macro(“Local/[email protected];1”, “blkvm-clr,”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “SHARED(BLKVM,SIP/71914448-000000b6)=”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “GOSUB_RETVAL=”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:3] MacroExit(“Local/[email protected];1”, “”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:7] ExecIf(“Local/[email protected];1”, “0?Set(MASTER_CHANNEL(CONNECTEDLINE(num))[email protected]/n)”) in new stack
[2016-08-14 15:27:24] VERBOSE[20961][C-00002041] pbx.c: – Executing [[email protected]:8] ExecIf(“Local/[email protected];1”, “0?Set(MASTER_CHANNEL(CONNECTEDLINE(name))=)”) in new stack
[2016-08-14 15:27:24] VERBOSE[20981][C-00002041] app_mixmonitor.c: == MixMonitor close filestream (mixed)
[2016-08-14 15:27:24] VERBOSE[20981][C-00002041] app_mixmonitor.c: == End MixMonitor Recording Local/[email protected];2
[2016-08-14 15:27:24] VERBOSE[20957][C-00002040] app_dial.c: – SIP/71914448-000000b5 answered SIP/2000-000000b4