Hi:
I downloaded a freebpx distribution (FreePBX 15.0.17.34) from ISO file
Registered 2 zoiper softphone as SIP extensions (pjsip)
I can dial frome each other, but I can not talk … in either way?
What am I doing wrong?
Regards,
P.
There is a link to the wiki at the top of this page, If you still have a problem after fully absorbing it (that might take more than one read), then pastebin any logs you have that identify your ongoing problem.
I hav no idea whats wrong
The only I can see in this log is that since there is no audio, the call disconects after 34 seconds without RTP traffic
Any ideas WHY?
Firewall is disabled
Selinux is disabled
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:15] Set(“PJSIP/1002-00000008”, “AMPUSERCID=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:16] Set(“PJSIP/1002-00000008”, “__DIAL_OPTIONS=HhTtr”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:17] Set(“PJSIP/1002-00000008”, “CALLERID(all)=“1002” <1002>”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:18] ExecIf(“PJSIP/1002-00000008”, “0?Set(CUSDIAL=2001)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:19] ExecIf(“PJSIP/1002-00000008”, “0?Set(CALLERID(all)=“1002” <1002>)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:20] GotoIf(“PJSIP/1002-00000008”, “0?limit”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:21] ExecIf(“PJSIP/1002-00000008”, “0?Set(GROUP(concurrency_limit)=1002)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:22] ExecIf(“PJSIP/1002-00000008”, “0?Set(CHANNEL(language)=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:23] NoOp(“PJSIP/1002-00000008”, “Macro Depth is 2”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:24] GotoIf(“PJSIP/1002-00000008”, “1?report2:macroerror”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-user-callerid,s,25)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:25] GotoIf(“PJSIP/1002-00000008”, “0?continue”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:26] ExecIf(“PJSIP/1002-00000008”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:27] Set(“PJSIP/1002-00000008”, “__TTL=64”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:28] GotoIf(“PJSIP/1002-00000008”, “1?continue”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-user-callerid,s,44)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:44] Set(“PJSIP/1002-00000008”, “CALLERID(number)=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:45] Set(“PJSIP/1002-00000008”, “CALLERID(name)=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:46] GotoIf(“PJSIP/1002-00000008”, “0?cnum”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:47] Set(“PJSIP/1002-00000008”, “CDR(cnam)=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:48] Set(“PJSIP/1002-00000008”, “CDR(cnum)=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-user-callerid:49] Set(“PJSIP/1002-00000008”, “CHANNEL(language)=es”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:2] Set(“PJSIP/1002-00000008”, “RingGroupMethod=none”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:3] Set(“PJSIP/1002-00000008”, “__EXTTOCALL=2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:4] Set(“PJSIP/1002-00000008”, “__PICKUPMARK=2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:5] Set(“PJSIP/1002-00000008”, “RT=”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:6] ExecIf(“PJSIP/1002-00000008”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:7] ExecIf(“PJSIP/1002-00000008”, “0?MacroExit()”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:8] ExecIf(“PJSIP/1002-00000008”, “0?Gosub(ext-intercom,*802001,1())”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:9] ExecIf(“PJSIP/1002-00000008”, “0?MacroExit()”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:10] ExecIf(“PJSIP/1002-00000008”, “0?ChanSpy(PJSIP/2001,q)”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:11] ExecIf(“PJSIP/1002-00000008”, “0?MacroExit()”) in new stack
[2022-01-25 00:31:56] WARNING[6577][C-00000005] chan_sip.c: This function can only be used on SIP channels.
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:12] ExecIf(“PJSIP/1002-00000008”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:13] ExecIf(“PJSIP/1002-00000008”, “0?MacroExit()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:14] ExecIf(“PJSIP/1002-00000008”, “0?Gosub(ext-intercom,*802001,1())”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:15] ExecIf(“PJSIP/1002-00000008”, “0?MacroExit()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:16] ExecIf(“PJSIP/1002-00000008”, “0?ChanSpy(PJSIP/2001,q)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:17] ExecIf(“PJSIP/1002-00000008”, “0?MacroExit()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:18] Gosub(“PJSIP/1002-00000008”, “sub-record-check,s,1(exten,2001,dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:1] GotoIf(“PJSIP/1002-00000008”, “0?initialized”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:2] Set(“PJSIP/1002-00000008”, “__REC_STATUS=INITIALIZED”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:3] Set(“PJSIP/1002-00000008”, “NOW=1643070716”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:4] Set(“PJSIP/1002-00000008”, “__DAY=25”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:5] Set(“PJSIP/1002-00000008”, “__MONTH=01”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:6] Set(“PJSIP/1002-00000008”, “__YEAR=2022”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:7] Set(“PJSIP/1002-00000008”, “__TIMESTR=20220125-003156”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:8] Set(“PJSIP/1002-00000008”, “__FROMEXTEN=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:9] Set(“PJSIP/1002-00000008”, “__MON_FMT=wav”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:10] NoOp(“PJSIP/1002-00000008”, “Recordings initialized”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:11] ExecIf(“PJSIP/1002-00000008”, “0?Set(ARG3=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:12] Set(“PJSIP/1002-00000008”, “REC_POLICY_MODE_SAVE=”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:13] ExecIf(“PJSIP/1002-00000008”, “0?Set(REC_STATUS=NO)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:14] GotoIf(“PJSIP/1002-00000008”, “5?checkaction”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (sub-record-check,s,17)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-record-check:17] GotoIf(“PJSIP/1002-00000008”, “1?sub-record-check,exten,1”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:1] NoOp(“PJSIP/1002-00000008”, “Exten Recording Check between 1002 and 2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:2] Set(“PJSIP/1002-00000008”, “CALLTYPE=internal”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:3] ExecIf(“PJSIP/1002-00000008”, “0?Set(CALLTYPE=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:4] Set(“PJSIP/1002-00000008”, “CALLEE=dontcare”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:5] ExecIf(“PJSIP/1002-00000008”, “0?Set(CALLEE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:6] GotoIf(“PJSIP/1002-00000008”, “0?callee”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:7] GotoIf(“PJSIP/1002-00000008”, “1?caller”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (sub-record-check,exten,13)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:13] Set(“PJSIP/1002-00000008”, “RECMODE=dontcare”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:14] Set(“PJSIP/1002-00000008”, “CALLERRECMODE=dontcare”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:15] Set(“PJSIP/1002-00000008”, “CALEERECMODE=dontcare”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:16] GotoIf(“PJSIP/1002-00000008”, “0?processnormal”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:17] ExecIf(“PJSIP/1002-00000008”, “0?Set(RECMODE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:18] ExecIf(“PJSIP/1002-00000008”, “0?Set(RECMODE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:19] ExecIf(“PJSIP/1002-00000008”, “0?Set(RECMODE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:20] ExecIf(“PJSIP/1002-00000008”, “0?Set(RECMODE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:21] ExecIf(“PJSIP/1002-00000008”, “0?Set(RECMODE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:22] ExecIf(“PJSIP/1002-00000008”, “1?Set(RECMODE=dontcare)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:23] Gosub(“PJSIP/1002-00000008”, “recordcheck,1(dontcare,internal,2001)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“PJSIP/1002-00000008”, “Starting recording check against dontcare”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“PJSIP/1002-00000008”, “dontcare”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [exten@sub-record-check:24] Return(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:19] GotoIf(“PJSIP/1002-00000008”, “1?macrodial”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-exten-vm,s,25)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:25] GosubIf(“PJSIP/1002-00000008”, “0?clrheader,1()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-exten-vm:26] Macro(“PJSIP/1002-00000008”, “dial-one,HhTtr,2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:1] Set(“PJSIP/1002-00000008”, “DEXTEN=2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:2] Set(“PJSIP/1002-00000008”, “__CRM_SOURCE=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:3] ExecIf(“PJSIP/1002-00000008”, “0?Set(__EXTTOCALL=2001)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:4] Set(“PJSIP/1002-00000008”, “DIALSTATUS_CW=”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:5] GosubIf(“PJSIP/1002-00000008”, “0?screen,1()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:6] GosubIf(“PJSIP/1002-00000008”, “0?cf,1()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:7] GotoIf(“PJSIP/1002-00000008”, “1?skip1”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-dial-one,s,10)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:10] GotoIf(“PJSIP/1002-00000008”, “0?nodial”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:11] GotoIf(“PJSIP/1002-00000008”, “0?continue”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:12] Set(“PJSIP/1002-00000008”, “EXTHASCW=ENABLED”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:13] GotoIf(“PJSIP/1002-00000008”, “0?next1:cwinusebusy”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-dial-one,s,25)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:25] GotoIf(“PJSIP/1002-00000008”, “0?next3:continue”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-dial-one,s,27)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:27] GotoIf(“PJSIP/1002-00000008”, “0?nodial”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:28] GosubIf(“PJSIP/1002-00000008”, “1?dstring,1():dlocal,1()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:1] Set(“PJSIP/1002-00000008”, “DSTRING=”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:2] Set(“PJSIP/1002-00000008”, “DEVICES=2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:3] ExecIf(“PJSIP/1002-00000008”, “0?Return()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:4] ExecIf(“PJSIP/1002-00000008”, “0?Set(DEVICES=001)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:5] Set(“PJSIP/1002-00000008”, “LOOPCNT=1”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:6] Set(“PJSIP/1002-00000008”, “ITER=1”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:7] Set(“PJSIP/1002-00000008”, “THISDIAL=PJSIP/2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:8] GotoIf(“PJSIP/1002-00000008”, “0?docheck”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:9] NoOp(“PJSIP/1002-00000008”, “Debug: Found PJSIP Destination PJSIP/2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:10] GotoIf(“PJSIP/1002-00000008”, “0?doset”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:11] NoOp(“PJSIP/1002-00000008”, “Debug: Updating PJSIP Destination with PJSIP_DIAL_CONTACTS”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:12] Set(“PJSIP/1002-00000008”, “THISDIAL=PJSIP/2001/sip:[email protected]:58679;rinstance=36a39703eed6c8b4”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:13] ExecIf(“PJSIP/1002-00000008”, “0?Set(DIALSTATUS=CHANUNAVAIL)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:14] GotoIf(“PJSIP/1002-00000008”, “0?skipset”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:15] Set(“PJSIP/1002-00000008”, “DSTRING=PJSIP/2001/sip:[email protected]:58679;rinstance=36a39703eed6c8b4&”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:16] Set(“PJSIP/1002-00000008”, “ITER=2”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:17] GotoIf(“PJSIP/1002-00000008”, “0?begin”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:18] ExecIf(“PJSIP/1002-00000008”, “0?Return()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:19] Set(“PJSIP/1002-00000008”, “DSTRING=PJSIP/2001/sip:[email protected]:58679;rinstance=36a39703eed6c8b4”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [dstring@macro-dial-one:20] Return(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:29] GotoIf(“PJSIP/1002-00000008”, “0?nodial”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:30] GotoIf(“PJSIP/1002-00000008”, “0?skiptrace”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:31] GosubIf(“PJSIP/1002-00000008”, “1?ctset,1():ctclear,1()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [ctset@macro-dial-one:1] Set(“PJSIP/1002-00000008”, “DB(CALLTRACE/2001)=1002”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [ctset@macro-dial-one:2] Return(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:32] Set(“PJSIP/1002-00000008”, “D_OPTIONS=HhTtr”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:33] GosubIf(“PJSIP/1002-00000008”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:34] NoOp(“PJSIP/1002-00000008”, "Blind Transfer: , Attended Transfer: , User: 1002, Alert Info: ") in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:35] ExecIf(“PJSIP/1002-00000008”, “1?Set(ALERT_INFO=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:36] ExecIf(“PJSIP/1002-00000008”, “0?Set(ALERT_INFO=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:37] ExecIf(“PJSIP/1002-00000008”, “0?Set(ALERT_INFO=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:38] ExecIf(“PJSIP/1002-00000008”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:39] ExecIf(“PJSIP/1002-00000008”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:40] GosubIf(“PJSIP/1002-00000008”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:41] ExecIf(“PJSIP/1002-00000008”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:42] GosubIf(“PJSIP/1002-00000008”, “0?qwait,1()”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:43] Set(“PJSIP/1002-00000008”, “__CWIGNORE=”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:44] Set(“PJSIP/1002-00000008”, “__KEEPCID=TRUE”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:45] GotoIf(“PJSIP/1002-00000008”, “0?usegoto,1”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:46] GotoIf(“PJSIP/1002-00000008”, “0?godial”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:47] Gosub(“PJSIP/1002-00000008”, “sub-presencestate-display,s,1(2001)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@sub-presencestate-display:1] Goto(“PJSIP/1002-00000008”, “state-not_set,1”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (sub-presencestate-display,state-not_set,1)
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [state-not_set@sub-presencestate-display:1] Set(“PJSIP/1002-00000008”, “PRESENCESTATE_DISPLAY=”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [state-not_set@sub-presencestate-display:2] Return(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:48] Set(“PJSIP/1002-00000008”, “CONNECTEDLINE(name,i)=PC”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:49] Set(“PJSIP/1002-00000008”, “CONNECTEDLINE(num)=2001”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:50] Set(“PJSIP/1002-00000008”, “D_OPTIONS=HhTtr”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:51] Macro(“PJSIP/1002-00000008”, “dialout-one-predial-hook,”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:52] ExecIf(“PJSIP/1002-00000008”, “0?Set(D_OPTIONS=HhtrI)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:53] ExecIf(“PJSIP/1002-00000008”, “0?Set(CWRING=r(callwaiting)):Set(CWRING=)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:54] NoOp(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:55] ExecIf(“PJSIP/1002-00000008”, “0?Set(D_OPTIONS=HhTtrg)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-dial-one:56] Dial(“PJSIP/1002-00000008”, “PJSIP/2001/sip:[email protected]:58679;rinstance=36a39703eed6c8b4,HhTtrb(func-apply-sipheaders^s^1)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] app_stack.c: PJSIP/2001-00000009 Internal Gosub(func-apply-sipheaders,s,1) start
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@func-apply-sipheaders:1] ExecIf(“PJSIP/2001-00000009”, “0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@func-apply-sipheaders:2] NoOp(“PJSIP/2001-00000009”, “Applying SIP Headers to channel PJSIP/2001-00000009”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“PJSIP/2001-00000009”, “TECH=PJSIP”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@func-apply-sipheaders:4] Set(“PJSIP/2001-00000009”, “SIPHEADERKEYS=”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@func-apply-sipheaders:5] While(“PJSIP/2001-00000009”, “0”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] app_while.c: Jumping to priority 13
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] pbx.c: Executing [s@func-apply-sipheaders:14] Return(“PJSIP/2001-00000009”, “”) in new stack
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] app_stack.c: Spawn extension (from-internal, 2001, 1) exited non-zero on ‘PJSIP/2001-00000009’
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] app_stack.c: PJSIP/2001-00000009 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2022-01-25 00:31:56] VERBOSE[6577][C-00000005] app_dial.c: Called PJSIP/2001/sip:[email protected]:58679;rinstance=36a39703eed6c8b4
[2022-01-25 00:31:56] VERBOSE[2329] netsock2.c: Using SIP RTP Audio TOS bits 184
[2022-01-25 00:31:56] VERBOSE[2329] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2022-01-25 00:31:56] VERBOSE[2329] netsock2.c: Using SIP RTP Audio CoS mark 5
[2022-01-25 00:31:57] VERBOSE[6577][C-00000005] app_dial.c: PJSIP/2001-00000009 is ringing
[2022-01-25 00:32:00] VERBOSE[6577][C-00000005] app_dial.c: PJSIP/2001-00000009 answered PJSIP/1002-00000008
[2022-01-25 00:32:00] VERBOSE[6590][C-00000005] bridge_channel.c: Channel PJSIP/2001-00000009 joined ‘simple_bridge’ basic-bridge <3db9a7f4-861a-44de-9c57-47f46eb217b7>
[2022-01-25 00:32:00] VERBOSE[6577][C-00000005] bridge_channel.c: Channel PJSIP/1002-00000008 joined ‘simple_bridge’ basic-bridge <3db9a7f4-861a-44de-9c57-47f46eb217b7>
[2022-01-25 00:32:30] NOTICE[2366] res_pjsip_sdp_rtp.c: Disconnecting channel ‘PJSIP/2001-00000009’ for lack of audio RTP activity in 34 seconds
[2022-01-25 00:32:30] VERBOSE[6590][C-00000005] bridge_channel.c: Channel PJSIP/2001-00000009 left ‘simple_bridge’ basic-bridge <3db9a7f4-861a-44de-9c57-47f46eb217b7>
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] bridge_channel.c: Channel PJSIP/1002-00000008 left ‘simple_bridge’ basic-bridge <3db9a7f4-861a-44de-9c57-47f46eb217b7>
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] app_macro.c: Spawn extension (macro-dial-one, s, 56) exited non-zero on ‘PJSIP/1002-00000008’ in macro ‘dial-one’
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] app_macro.c: Spawn extension (macro-exten-vm, s, 26) exited non-zero on ‘PJSIP/1002-00000008’ in macro ‘exten-vm’
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Spawn extension (ext-local, 2001, 3) exited non-zero on ‘PJSIP/1002-00000008’
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Executing [h@ext-local:1] Macro(“PJSIP/1002-00000008”, “hangupcall,”) in new stack
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“PJSIP/1002-00000008”, “1?theend”) in new stack
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2022-01-25 00:32:30] NOTICE[2366] res_pjsip_sdp_rtp.c: Disconnecting channel ‘PJSIP/1002-00000008’ for lack of audio RTP activity in 34 seconds
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“PJSIP/1002-00000008”, “0?Set(CDR(recordingfile)=)”) in new stack
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-hangupcall:4] NoOp(“PJSIP/1002-00000008”, "PJSIP/2001-00000009 montior file= ") in new stack
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-hangupcall:5] GotoIf(“PJSIP/1002-00000008”, “1?skipagi”) in new stack
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx_builtins.c: Goto (macro-hangupcall,s,7)
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Executing [s@macro-hangupcall:7] Hangup(“PJSIP/1002-00000008”, “”) in new stack
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] app_macro.c: Spawn extension (macro-hangupcall, s, 7) exited non-zero on ‘PJSIP/1002-00000008’ in macro ‘hangupcall’
[2022-01-25 00:32:30] VERBOSE[6577][C-00000005] pbx.c: Spawn extension (ext-local, h, 1) exited non-zero on ‘PJSIP/1002-00000008’
In Asterisk SIP Settings, confirm that External Address and Local Networks are correctly set. If you change these, after Submit and Apply Config, you must restart Asterisk.
If you still have trouble, at the Asterisk command prompt type
pjsip set logger on
make a failing call, paste the Asterisk log for the call at pastebin.freepbx.org and post the link here. If you are too new to post links, just post the last eight hex characters of the URL.
In Asterisk SIP Settings, confirm that External Address and Local Networks are correctly set. If you change these, after Submit and Apply Config, you must restart Asterisk.
If you still have trouble, at the Asterisk command prompt type
pjsip set logger on
make a failing call, paste the Asterisk log for the call at pastebin.freepbx.org and post the link here. If you are too new to post links, just post the last eight hex characters of the URL.
Hi Stewart:
I made it work !!!
But as far as I know it is working “strange”
I changed this
Put 192.168.0.0/24 in Local Networks and left External address blank …
If you look in the logs …
You can see the 104.145.12.182 ip and it looks like it tries to nat behind this …
I do not really understand.
Do you know what is that?
Regards,
P
You need to put your external IP in that field
By external you mean Internet Public IP?
Or just the IP in my LAN the PBX uses to comunicate?
Yes your public IP
I would speculate that providing the local network turned on sending “rport” in the request, which allows the other side to work round the lack of your public address, at least for outgoing requests. However, as Stewart says, you should put your public address in the External Address box.
This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.