Hi all - my first time installing the new v17. Machine is an AMD Ryzen “Acemagic” PC with 256GB SSD. Below is how the new distro installer allocated the disk partitions. Before I roll this to a client with about 20 extensions, I want to make sure its not going to fill up with voicemails and logs - so i think i need to expand some of these partitions? But (newb on the backend stuff) I have no idea which ones - and/or how to do it… Did I do something wrong? Or is this how Debian works - like it will expand as it needs space? Freepbx 17.0.30, just downloaded on 7/29/2026. installer ISO is SNGDEB-PBX17-amd64-12-13-0-2603-3. TIA for any and all help!
That’s a known display issue in the Dashboard on multi-partition systems. The display inside SysAdmin shows the correct info (as your command line captures reveal.)
Alternatively, you can reinstall with the SLAB option to use only partitions for boot, root and swap, if you’d prefer.
Thank you for the super quick response! I feel much better about deploying this system. (Its a finicky customer that is 3 hours from our office, so I need it to be as rock solid as our FreePBX16 ones are! Thank you again!