Need Help With Registration of trunks

ZS6PX · April 10, 2012, 12:49am

Hi All, I’m new to Freepbx and really enjoy this learning curve, I just need some help with some problems or human errors.

I’m setting up a sip2sip account and have it registered with the sip domain and the peer is also connected, now sometimes I can receive calls but can not dail out, I get the voice prompt that say “all circuits are busy now please try again later” and I’m not sure what the problem can be.

I have seen a picture of my friend’s freepbx and what I have noticed is that he have 3 bars under FreePBX Connections one say " IP Phones online " other one “IP Trunk Registration” and the other one “IP Trunks online” now mine have all but one “IP Trunks online”

I hope there is someone out there that would be able to assist me.

Have a look at this picture below

Thank you all for your help.

Regards

Jaco

SkykingOH · April 10, 2012, 1:31am

The status page is not directly meaningful. You need to post your versions, logs and output of ‘sip show peers’, ‘sip show registry’ commands.

ZS6PX · April 10, 2012, 8:01am

Hi Thanks for coming back to the post, I’m sorry for not adding it, here’s the details.

My Versions of Distro
FreePBX 2.10.0.4
Asterisk (Ver. 1.8.10.0)

Peer Details:

disallow=all
allow=alaw&ulaw
context=from-trunk
dtmfmode=RFC2833
fromdomain=sip2sip.info
fromuser=2233XXXXXX
host=proxy.sipthor.net
insecure=very
qualify=yes
secret=XXXXXXXXXX
type=peer
username=2233XXXXXX
authname=2233XXXXXX
canreinvite=no
nat=yes
port=5060

Here is a part of the log file.

[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘MeetMeAdmin’
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘MeetMeCount’
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘MeetMe’
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘SLAStation’
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘SLATrunk’
[2012-04-10 09:39:05] DEBUG[2603] xmldoc.c: Cannot find variable ‘description’ in tree ‘MEETME_INFO’
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered custom function ‘MEETME_INFO’
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: app_meetme.so => (MeetMe conference bridge)
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered custom function ‘DEVICE_STATE’
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered custom function ‘HINT’
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: func_devstate.so => (Gets or sets a device state in the dialplan)
[2012-04-10 09:39:05] WARNING[2603] cdr_manager.c: Failed to load configuration file. Module not activated.
[2012-04-10 09:39:05] ERROR[2603] cel_custom.c: Unable to load cel_custom.conf. Not logging CEL to custom CSVs.
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: cel_custom.so => (Customizable Comma Separated Values CEL Backend)
[2012-04-10 09:39:05] ERROR[2603] cdr_syslog.c: Unable to load cdr_syslog.conf. Not logging custom CSV CDRs to syslog.
[2012-04-10 09:39:05] ERROR[2603] cdr_custom.c: Unable to load cdr_custom.conf. Not logging custom CSV CDRs.
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: cdr_custom.so => (Customizable Comma Separated Values CDR Backend)
[2012-04-10 09:39:05] VERBOSE[2603] config.c: == Parsing ‘/etc/asterisk/cdr.conf’: [2012-04-10 09:39:05] VERBOSE[2603] config.c: == Found
[2012-04-10 09:39:05] WARNING[2603] cel_manager.c: Failed to load configuration file. CEL manager Module not activated.
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘Echo’
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: app_echo.so => (Simple Echo Application)
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘Read’
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: app_read.so => (Read Variable Application)
[2012-04-10 09:39:05] VERBOSE[2603] pbx.c: == Registered application ‘ChannelRedirect’
[2012-04-10 09:39:05] VERBOSE[2603] loader.c: app_channelredirect.so => (Redirects a given channel to a dialplan target)
[2012-04-10 09:39:05] VERBOSE[2603] translate.c: == Registered translator ‘lpc10tolin’ from format lpc10 to slin, cost 2999
[2012-04-10 09:39:05] VERBOSE[2603] translate.c: == Registered translator ‘lintolpc10’ from format slin to lpc10, cost 3000

Asterisk Info:

I hope that this will help

pezzz · April 12, 2012, 3:48am

You say you can get calls in but not out. Have you done an ourbound route for the number you are trying to call ??

SkykingOH · April 12, 2012, 5:23am

You need to post log output for when the call fails with the verbosity turned up.

ZS6PX · April 12, 2012, 9:28am

Thanks for the reply, please remember I’m very new to freepbx and hope that I supply you with the right info needed for the help I needed.

Both numbers are from sip2sip account PBX and the called party. (test)

[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [2233512165@from-internal:1] Macro(“SIP/100-0000000e”, “user-callerid,LIMIT,”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/100-0000000e”, “AMPUSER=100”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:2] GotoIf(“SIP/100-0000000e”, “0?report”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:3] ExecIf(“SIP/100-0000000e”, “1?Set(REALCALLERIDNUM=100)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:4] Set(“SIP/100-0000000e”, “AMPUSER=100”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/100-0000000e”, “AMPUSERCIDNAME=Office”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/100-0000000e”, “0?report”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/100-0000000e”, “AMPUSERCID=100”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/100-0000000e”, “CALLERID(all)=“Office” <100>”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:9] GotoIf(“SIP/100-0000000e”, “0?limit”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:10] ExecIf(“SIP/100-0000000e”, “1?Set(GROUP(concurrency_limit)=100)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:11] ExecIf(“SIP/100-0000000e”, “0?Set(CHANNEL(language)=)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:12] GosubIf(“SIP/100-0000000e”, “7?sub-ccss,s,1(from-internal,2233512165)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/100-0000000e”, “0?Return()”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/100-0000000e”, “CCSS_SETUP=TRUE”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/100-0000000e”, “0?monitor_config,1(from-internal,2233512165):monitor_default,1(from-internal,2233512165)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/100-0000000e”, “0?is_exten”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/100-0000000e”, “”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/100-0000000e”, “FALSE”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:13] GotoIf(“SIP/100-0000000e”, “1?continue”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Goto (macro-user-callerid,s,26)
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/100-0000000e”, “CALLERID(number)=100”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/100-0000000e”, “CALLERID(name)=Office”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-user-callerid:28] Set(“SIP/100-0000000e”, “CHANNEL(language)=en”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [2233512165@from-internal:2] Set(“SIP/100-0000000e”, “MOHCLASS=default”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [2233512165@from-internal:3] Set(“SIP/100-0000000e”, “_NODEST=”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [2233512165@from-internal:4] Gosub(“SIP/100-0000000e”, “sub-record-check,s,1(out,2233512165,)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:1] GotoIf(“SIP/100-0000000e”, “1?check”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Goto (sub-record-check,s,3)
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:3] Set(“SIP/100-0000000e”, “MON_FMT=wav”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:4] GotoIf(“SIP/100-0000000e”, “1?next”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Goto (sub-record-check,s,7)
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:7] ExecIf(“SIP/100-0000000e”, “0?Return()”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/100-0000000e”, “0?out,1”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:9] Set(“SIP/100-0000000e”, “__REC_STATUS=INITIALIZED”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:10] ExecIf(“SIP/100-0000000e”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:11] Set(“SIP/100-0000000e”, “NOW=1334222031”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:12] Set(“SIP/100-0000000e”, “__DAY=12”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:13] Set(“SIP/100-0000000e”, “__MONTH=04”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/100-0000000e”, “__YEAR=2012”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/100-0000000e”, “__TIMESTR=20120412-111351”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/100-0000000e”, “__FROMEXTEN=100”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/100-0000000e”, “__CALLFILENAME=out-2233512165-100-20120412-111351-1334222031.14”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-record-check:18] Goto(“SIP/100-0000000e”, “out,1”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Goto (sub-record-check,out,1)
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [out@sub-record-check:1] ExecIf(“SIP/100-0000000e”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [out@sub-record-check:2] GosubIf(“SIP/100-0000000e”, “0?record,1(exten,2233512165,100)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [out@sub-record-check:3] Return(“SIP/100-0000000e”, “”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [2233512165@from-internal:5] Macro(“SIP/100-0000000e”, “dialout-trunk,1,2233512165,”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/100-0000000e”, “DIAL_TRUNK=1”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/100-0000000e”, “0?sub-pincheck,s,1()”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/100-0000000e”, “0?disabletrunk,1”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/100-0000000e”, “DIAL_NUMBER=2233512165”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/100-0000000e”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/100-0000000e”, “OUTBOUND_GROUP=OUT_1”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/100-0000000e”, “0?nomax”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:8] GotoIf(“SIP/100-0000000e”, “0?chanfull”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/100-0000000e”, “0?skipoutcid”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/100-0000000e”, “DIAL_TRUNK_OPTIONS=”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/100-0000000e”, “outbound-callerid,1”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/100-0000000e”, “0?Set(CALLERPRES()=)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/100-0000000e”, “0?Set(REALCALLERIDNUM=100)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/100-0000000e”, “1?normcid”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/100-0000000e”, “USEROUTCID=100”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/100-0000000e”, “EMERGENCYCID=”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/100-0000000e”, “TRUNKOUTCID=2233512181”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/100-0000000e”, “1?trunkcid”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/100-0000000e”, “1?Set(CALLERID(all)=2233512181)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/100-0000000e”, “1?Set(CALLERID(all)=100)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/100-0000000e”, “0?Set(CALLERID(all)=)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/100-0000000e”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/100-0000000e”, “1?sub-flp-1,s,1()”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-flp-1:1] ExecIf(“SIP/100-0000000e”, “0?Return()”) in new stack
[2012-04-12 11:13:51] VERBOSE[1862] pbx.c: – Executing [s@sub-flp-1:2] ExecIf(“SIP/100-0000000e”, “1?Return()”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/100-0000000e”, “OUTNUM=2233512165”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/100-0000000e”, “custom=SIP/sip2sip sip”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/100-0000000e”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/100-0000000e”, “0?Set(DIAL_TRUNK_OPTIONS=M(confirm))”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/100-0000000e”, “dialout-trunk-predial-hook,”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/100-0000000e”, “”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/100-0000000e”, “0?bypass,1”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/100-0000000e”, “1?Set(CONNECTEDLINE(num,i)=2233512165)”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/100-0000000e”, “1?Set(CONNECTEDLINE(name,i)=CID:100)”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/100-0000000e”, “0?customtrunk”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/100-0000000e”, “SIP/sip2sip sip/2233512165,300,”) in new stack
[2012-04-12 11:13:52] VERBOSE[1862] netsock2.c: == Using SIP RTP TOS bits 184
[2012-04-12 11:13:52] VERBOSE[1862] netsock2.c: == Using SIP RTP CoS mark 5
[2012-04-12 11:13:52] VERBOSE[1862] app_dial.c: – Called SIP/sip2sip sip/2233512165
[2012-04-12 11:13:53] VERBOSE[2672] chan_sip.c: – Got SIP response 482 “Loop detected” back from 85.17.186.7:5060
[2012-04-12 11:13:53] VERBOSE[1862] app_dial.c: – SIP/sip2sip sip-0000000f is circuit-busy
[2012-04-12 11:13:53] VERBOSE[1862] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/100-0000000e”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 127”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s@macro-dialout-trunk:24] Goto(“SIP/100-0000000e”, “s-CONGESTION,1”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:1] Set(“SIP/100-0000000e”, “RC=127”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:2] Goto(“SIP/100-0000000e”, “127,1”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Goto (macro-dialout-trunk,127,1)
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [127@macro-dialout-trunk:1] Goto(“SIP/100-0000000e”, “continue,1”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [continue@macro-dialout-trunk:1] GotoIf(“SIP/100-0000000e”, “1?noreport”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [continue@macro-dialout-trunk:3] NoOp(“SIP/100-0000000e”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 127 - failing through to other trunks”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [continue@macro-dialout-trunk:4] Set(“SIP/100-0000000e”, “CALLERID(number)=100”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [2233512165@from-internal:6] Macro(“SIP/100-0000000e”, “outisbusy,”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s@macro-outisbusy:1] Progress(“SIP/100-0000000e”, “”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s@macro-outisbusy:2] GotoIf(“SIP/100-0000000e”, “0?emergency,1”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s@macro-outisbusy:3] GotoIf(“SIP/100-0000000e”, “0?intracompany,1”) in new stack
[2012-04-12 11:13:53] VERBOSE[1862] pbx.c: – Executing [s@macro-outisbusy:4] Playback(“SIP/100-0000000e”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[2012-04-12 11:13:54] VERBOSE[1862] file.c: – <SIP/100-0000000e> Playing ‘all-circuits-busy-now.ulaw’ (language ‘en’)
[2012-04-12 11:13:55] VERBOSE[1862] file.c: – <SIP/100-0000000e> Playing ‘pls-try-call-later.alaw’ (language ‘en’)
[2012-04-12 11:13:58] VERBOSE[1862] pbx.c: – Executing [s@macro-outisbusy:5] Congestion(“SIP/100-0000000e”, “20”) in new stack
[2012-04-12 11:13:58] WARNING[1862] channel.c: Prodding channel ‘SIP/100-0000000e’ failed
[2012-04-12 11:13:58] VERBOSE[1862] app_macro.c: == Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘SIP/100-0000000e’ in macro ‘outisbusy’
[2012-04-12 11:13:58] VERBOSE[1862] pbx.c: == Spawn extension (from-internal, 2233512165, 6) exited non-zero on ‘SIP/100-0000000e’
[2012-04-12 11:13:58] VERBOSE[1862] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/100-0000000e”, “”) in new stack
[2012-04-12 11:13:58] VERBOSE[1862] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/100-0000000e’

SkykingOH · April 12, 2012, 1:25pm

That’s a bunch of log output…

Did you see the error:

 Called SIP/sip2sip sip/2233512165
[2012-04-12 11:13:53] VERBOSE[2672] chan_sip.c: -- Got SIP response 482 "Loop detected" back from 85.17.186.7:5060

Isn’t that your carrier’s IP? Code 482 is a SIP response code.

If you Google SIP 482, lot’s of discussion on possible causes.