Module update not downloading

Hi Guru’s,

Some modules are not downloading it stays stuck at 0% any idea why?

Module(s) requiring upgrades: amd, arimanager, asteriskinfo, blacklist, bulkhandler, callerid, callforward, calllimit, callrecording, cel, conferences, conferencespro, cxpanel, digium_phones, disa, donotdisturb, endpoint, extensionroutes, fax, faxpro, hotelwakeup, infoservices, logfiles, manager, miscapps, miscdests, music, outroutemsg, paging, pagingpro, parking, parkpro, phonebook, pinsets, pinsetspro, presencestate, queueprio, recordings, restapps, setcid, sipstation, sms, soundlang, timeconditions, tts, ttsengines, vmblast, voicemail_report, xmpp
Upgrading module ‘amd’ from 13.0.4 to 15.0.3
Downloading module ‘amd’
Processing amd
Verifying local module download…Redownloading
Downloading…
0/20093 [>---------------------------] 0%

Managed to do some updates manual but when I know try to do a system update from 15 to 16 it starts downloading pm2 and again it gets stuck. Not sure why sometimes it works sometimes it doest…

Starting module download from http://mirror1.freepbx.org/modules/packages/pm2/pm2-16.0.8.tgz.gpg
Processing
Downloading…
0/28857 [>---------------------------] 0%

Hi @nxswart
Try to refresh your signatures first. then try to install.
fwconsole ma refreshsignatures

Did not do the trick:

Try to download manually

wget http://mirror1.freepbx.org/modules/packages/pm2/pm2-16.0.8.tgz.gpg`

--2022-11-23 12:25:10--  http://mirror1.freepbx.org/modules/packages/pm2/pm2-16.0.8.tgz.gpg
Resolving mirror1.freepbx.org (mirror1.freepbx.org)... 172.67.42.223, 104.22.48.127, 104.22.49.127
Connecting to mirror1.freepbx.org (mirror1.freepbx.org)|172.67.42.223|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 28857 (28K) [application/octet-stream]
Saving to: ‘pm2-16.0.8.tgz.gpg’

pm2-16.0.8.tgz.gpg             100%[=================================================>]  28.18K  --.-KB/s    in 0.1s    

2022-11-23 12:25:11 (290 KB/s) - ‘pm2-16.0.8.tgz.gpg’ saved [28857/28857]

Yes downloading with wget works, but on the install it keeps freezing.

I needed to to a restore of a snapshot and after that I check the module admin to update and also there it freezes again:
image

Maybe you need to try after Snapshot restore 1st to update your Zend ID? After then try to refresh module and update again.

fwconsole sa u