Llamadas se cortan inmediatamente

freepbx
Tags: #<Tag:0x00007f702a0dae70>

(Adalbikerboy) #1

Hola, buenas.

Tengo el problema de que cualquier llamada entra, pero se corta de inmediato, solo suena una vez y se cuelga, alguna idea de que pueda ser o me puedan guiar a que buscar?

Ésto es lo que me manda el cli de asterisk después del ringing.-

-- PJSIP/5850-0000004b is ringing
-- PJSIP/5850-0000004b is ringing

-- Remote UNIX connection disconnected

== Spawn extension (macro-dial-one, s, 55) exited non-zero on ‘IAX2/iaxveracruz-8072’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 26) exited non-zero on ‘IAX2/iaxveracruz-8072’ in macro ‘exten-vm’
== Spawn extension (ext-local, 5850, 2) exited non-zero on ‘IAX2/iaxveracruz-8072’
– Executing [h@ext-local:1] Macro(“IAX2/iaxveracruz-8072”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“IAX2/iaxveracruz-8072”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“IAX2/iaxveracruz-8072”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] NoOp(“IAX2/iaxveracruz-8072”, "PJSIP/5850-0000004b montior file= ") in new stack
– Executing [s@macro-hangupcall:5] GotoIf(“IAX2/iaxveracruz-8072”, “1?skipagi”) in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] Hangup(“IAX2/iaxveracruz-8072”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 7) exited non-zero on ‘IAX2/iaxveracruz-8072’ in macro ‘hangupcall’
== Spawn extension (ext-local, h, 1) exited non-zero on ‘IAX2/iaxveracruz-8072’
– Hungup ‘IAX2/iaxveracruz-8072’

Gracias de antemano.


(Chris Dolese) #2

Check codecs and if possible a packet capture of the failure


(Adalbikerboy) #3

Gracias dolesec, los codecs están bien a mi parecer, en ambos lados están registrados los correctos.-

veracruz-atp*CLI> iax2 show peer iaxaereo

  • Name : iaxaereo
    Secret :
    Context : default
    Parking lot :
    Mailbox :
    Dynamic : Yes
    Callnum limit: 0
    Calltoken req: No
    Trunk : Yes
    Encryption : (aes128,keyrotate)
    Callerid : “” <>
    Expire : -1
    ACL : No
    Addr->IP : 192.168.14.253 Port 4569
    Defaddr->IP : 0.0.0.0 Port 4569
    Username :
    Codecs : 0x703 (g723|gsm|g729|speex|ilbc)
    Codec Order : (none)
    Status : OK (124 ms)
    Qualify : every 60000ms when OK, every 10000ms when UNREACHABLE (sample smoothing Off)

Sistemas 2.-

freepbx-aereo*CLI> iax2 show peer iaxveracruz

  • Name : iaxveracruz
    Description :
    Secret :
    Context : from-internal
    Parking lot :
    Mailbox :
    Dynamic : Yes
    Callnum limit: 0
    Calltoken req: No
    Trunk : No
    Encryption : No
    Callerid : “” <>
    Expire : 13
    ACL : No
    Addr->IP : 192.168.8.254 Port 1045
    Defaddr->IP : (null) Port (null)
    Username :
    Codecs : (g723|gsm|ulaw|alaw|g726aal2|adpcm|slin|g729|speex|g726|g722|siren7|siren14|slin16|g719|speex16)
    Codec Order : (ulaw|alaw|gsm|g726|g729|g723|speex|speex16|g722|siren7|adpcm|g719|slin|slin16|g726aal2|siren14)
    Status : OK (155 ms)
    Qualify : every 60000ms when OK, every 10000ms when UNREACHABLE (sample smoothing Off)

Resultado de tcpdump.

tcpdump host 192.168.14.253
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
18:49:35.363745 IP pc253.veracruz.mex.iax > 192.168.14.253.iax: UDP, length 31
18:50:03.364693 IP pc253.veracruz.mex.iax > 192.168.14.253.iax: UDP, length 31
18:50:05.364253 IP pc253.veracruz.mex.iax > 192.168.14.253.iax: UDP, length 31
18:50:15.364111 IP pc253.veracruz.mex.iax > 192.168.14.253.iax: UDP, length 31

No sé si tenga que ver con el problema, pero se comunican a travez de una vpn “172.18.8.1” no de manera directa…

Gracias de antemano


(system) closed #4

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.