I have 3 Sangoma phones plus a Sangoma cordless set up in my home. I have a weird situation where if I intercom any of the phones, 1 specific phone always displays the call (even if this particular phone isn’t one of the phones called) For example, the kitchen phone is always ringing and displays the call origination caller ID and then switches to a busy signal say if the cordless dials the bedroom. Ive searched in endpoint manager to make sure the users are properly linked to their respective phones. I can not think of anything other reason this could be happening. Any ideas?
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] pbx.c: Executing [s@func-apply-sipheaders:9] EndWhile(“SIP/202-00000050”, “”) in new stack
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] pbx.c: Executing [s@func-apply-sipheaders:5] While(“SIP/202-00000050”, “0”) in new stack
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] pbx.c: Executing [s@func-apply-sipheaders:10] ExecIf(“SIP/202-00000050”, “0?SIPRemoveHeader(Alert-Info:)”) in new stack
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] pbx.c: Executing [s@func-apply-sipheaders:11] ExecIf(“SIP/202-00000050”, “0?Set(PJSIP_HEADER(remove,Alert-Info)=)”) in new stack
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] pbx.c: Executing [s@func-apply-sipheaders:12] Return(“SIP/202-00000050”, “”) in new stack
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] pbx.c: Executing [s@autoanswer:4] Return(“SIP/202-00000050”, “”) in new stack
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] app_stack.c: Spawn extension (from-internal, *80202, 1) exited non-zero on ‘SIP/202-00000050’
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] app_stack.c: SIP/202-00000050 Internal Gosub(autoanswer,s,1(<http://www.sangoma.com>;info=external,<uri>;answer-after=0)) complete GOSUB_RETVAL=
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] app_dial.c: Called SIP/202
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] app_dial.c: Connected line update to SIP/203-0000004e prevented.
[2018-09-19 21:34:40] VERBOSE[2701] chan_sip.c: Extension Changed 202[ext-local] new state Ringing for Notify User 201
[2018-09-19 21:34:40] VERBOSE[2701] chan_sip.c: Extension Changed 202[ext-local] new state Ringing for Notify User 200
[2018-09-19 21:34:40] VERBOSE[5237][C-0000001f] app_dial.c: SIP/202-00000050 is ringing
[2018-09-19 21:34:40] VERBOSE[2701] chan_sip.c: Extension Changed 202[ext-local] new state Ringing for Notify User 201
[2018-09-19 21:34:40] VERBOSE[2701] chan_sip.c: Extension Changed 202[ext-local] new state Ringing for Notify User 200 (queued)
[2018-09-19 21:34:41] VERBOSE[2701] chan_sip.c: Extension Changed 203[ext-local] new state Idle for Notify User 202
[2018-09-19 21:34:41] VERBOSE[5237][C-0000001f] pbx.c: Spawn extension (ext-intercom, *80202, 34) exited non-zero on ‘SIP/203-0000004e’
[2018-09-19 21:34:41] VERBOSE[2701] chan_sip.c: Extension Changed 203[ext-local] new state Idle for Notify User 201
[2018-09-19 21:34:41] VERBOSE[2701] chan_sip.c: Extension Changed 203[ext-local] new state Idle for Notify User 200
[2018-09-19 21:34:41] VERBOSE[2701] chan_sip.c: Extension Changed 202[ext-local] new state Idle for Notify User 201
[2018-09-19 21:34:41] VERBOSE[2701] chan_sip.c: Extension Changed 202[ext-local] new state Idle for Notify User 200
This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.