Hello All,
This is my first post, I’ve been close to pestering you all a couple of times, but luckily managed to find and work out the problems, but this one is starting to get to me, so before I launch them all out the window, I thought I would ask!
I have my freepbx up and running and I have the base station DP750 connected off it, all looks good, but its not right… I have looked at this for hours and tried a load of different things, but it seems the DP750 increments the handsets by 2 so the system see the first using port 5060 and that works find, the next extension connects to the pbx with port 5062, which makes sense, but doesn’t help since the system only is listening on 5060, extension three is 5064 and so on…
I can call the extensions from a ip phone fine, but can’t call the ip phone from the extensions, which i guess is down to not listening on the correct port? X43 works fine on the first extension, it doesn’t on the others, is there a way or work around, does anyone know?
Asterisk info shows:
Endpoint: 200/200 Not in use 0 of inf
InAuth: 200-auth/200
Aor: 200 1
Contact: 200/sip:[email protected]:43420;x-ast-orig 058e4c3acb Avail 664.973
Endpoint: 201/201 Not in use 0 of inf
InAuth: 201-auth/201
Aor: 201 1
Contact: 201/sip:[email protected]:5060 2ff794ffa2 Avail 7.843
Endpoint: 202/202 Not in use 0 of inf
InAuth: 202-auth/202
Aor: 202 1
Contact: 202/sip:[email protected]:5062 c8a68f5b7c Avail 10.322
Endpoint: 203/203 Not in use 0 of inf
InAuth: 203-auth/203
Aor: 203 1
Contact: 203/sip:[email protected]:5064 e24909d8f5 Avail 10.859
Endpoint: 204/204 Not in use 0 of inf
InAuth: 204-auth/204
Aor: 204 1
Contact: 204/sip:[email protected]:5066 fb90c3d883 Avail 9.215
DP750.
Any suggestions, Ideas, will be well apricated…
Happy New Year to you All!
Best wishes,
Julian