Hi, Did the manual update 10.13.66-7 from 10.13.66-6. Got a lot of Permission denied running it. I also did a module upgrade (framework) but can’t apply the config. exit: 126 sh: /var/lib/asterisk/bin/retrieve_conf: Permission denied Tried to run fwconsole chown but getting bash: /usr/local/sbi…

Are you logged in as root? You might try ‘sudo fwconsole chown’ and see what happens.

with chmod 777 /usr/sbin/fwconsole I was able to make fwconsole work again. Then, did a fwconsole chown Reboot Reapplied the upgrade. Seems to work now!!!

[image] godinperson: fwconsole chown I’m having the same issue! Did you just enter “fwconsole chown” without specifying the new owner? Thanks, Mike

Only fwconsole chown (it’s a command that knows what permission all folders and files needs and set them)

We just upgraded (via the system admin module - have always used CLI before) from 10.13.66-6 to 10.13.66-7. We are now experiencing almost the exact same issues described above. We can run fwconsole chown and it shows success with no errors but attempting to get into the commercial endpoint manage…

To (hopefully) add a little more clarity - we have the exact same issue as stated in the original post - retrieve_conf issue. But, unlike the OP we didn’t have any errors running fwconsole chown. Even so, the problem obviously did not go away. Thanks again for any ideas. Doug

Upgrade to the latest framework which will fix this issue then run: fwconsole chown

Thanks for the reply, Andrew. It will not update through the Module Administration module. Here is a screenshot. Is there a command to try it through the CLI? [image]

Please run these commands from the cli fwconsole chown --full fwconsole ma upgrade framework

FreePBX Community Forums

Fwconsole : Permission denied

General Help

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled