My freepbx system keeps rebooting. I do not know why. I am not sure where to look on the access, but I did go to /var/logs/httpd/ and looked at access and saw a weird user name try and access that no one should have attempted.
PBX Version: 16.0.40.7
PBX Distro: 12.7.8-2306-1.sng7
Asterisk Version: 19.8.0
Please advise. Thanks its now rebooting every few minutes.
Causes of reboots are usually found in /var/log/syslog (/var/log/messages), crashes and reboots will be start very early with a string containing ‘microcode’ quickly followed by a sequence of lines including the string “BIOS”
grep -B 50 microcode /var/log/syslog
will usually indicate either an ordered reboot or a crash
Here is what that output produced. Any help would be appreciated.
[root@freepbx ~]# grep -B 50 microcode /var/log/messages
Dec 12 06:51:16 freepbx kernel: hp_sw: device handler registered
Dec 12 06:51:16 freepbx kernel: emc: device handler registered
Dec 12 06:51:16 freepbx kernel: alua: device handler registered
Dec 12 06:51:16 freepbx kernel: libphy: Fixed MDIO Bus: probed
Dec 12 06:51:16 freepbx kernel: ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EH CI) Driver
Dec 12 06:51:16 freepbx kernel: ehci-pci: EHCI PCI platform driver
Dec 12 06:51:16 freepbx kernel: ehci-pci 0000:00:02.1: EHCI Host Controller
Dec 12 06:51:16 freepbx kernel: ehci-pci 0000:00:02.1: new USB bus registered, a ssigned bus number 1
Dec 12 06:51:16 freepbx kernel: ehci-pci 0000:00:02.1: debug port 1
Dec 12 06:51:16 freepbx kernel: ehci-pci 0000:00:02.1: irq 22, io mem 0xd0001000
Dec 12 06:51:16 freepbx kernel: ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.0 0
Dec 12 06:51:16 freepbx kernel: usb usb1: New USB device found, idVendor=1d6b, i dProduct=0002, bcdDevice= 3.10
Dec 12 06:51:16 freepbx kernel: usb usb1: New USB device strings: Mfr=3, Product =2, SerialNumber=1
Dec 12 06:51:16 freepbx kernel: usb usb1: Product: EHCI Host Controller
Dec 12 06:51:16 freepbx kernel: usb usb1: Manufacturer: Linux 3.10.0-1127.10.1.e l7.x86_64 ehci_hcd
Dec 12 06:51:16 freepbx kernel: usb usb1: SerialNumber: 0000:00:02.1
Dec 12 06:51:16 freepbx kernel: hub 1-0:1.0: USB hub found
Dec 12 06:51:16 freepbx kernel: hub 1-0:1.0: 10 ports detected
Dec 12 06:51:16 freepbx kernel: ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
Dec 12 06:51:16 freepbx kernel: ohci-pci: OHCI PCI platform driver
Dec 12 06:51:16 freepbx kernel: ohci-pci 0000:00:02.0: OHCI PCI host controller
Dec 12 06:51:16 freepbx kernel: ohci-pci 0000:00:02.0: new USB bus registered, a ssigned bus number 2
Dec 12 06:51:16 freepbx kernel: ohci-pci 0000:00:02.0: irq 23, io mem 0xd0000000
Dec 12 06:51:16 freepbx kernel: usb usb2: New USB device found, idVendor=1d6b, i dProduct=0001, bcdDevice= 3.10
Dec 12 06:51:16 freepbx kernel: usb usb2: New USB device strings: Mfr=3, Product =2, SerialNumber=1
Dec 12 06:51:16 freepbx kernel: usb usb2: Product: OHCI PCI host controller
Dec 12 06:51:16 freepbx kernel: usb usb2: Manufacturer: Linux 3.10.0-1127.10.1.e l7.x86_64 ohci_hcd
Dec 12 06:51:16 freepbx kernel: usb usb2: SerialNumber: 0000:00:02.0
Dec 12 06:51:16 freepbx kernel: hub 2-0:1.0: USB hub found
Dec 12 06:51:16 freepbx kernel: hub 2-0:1.0: 10 ports detected
Dec 12 06:51:16 freepbx kernel: uhci_hcd: USB Universal Host Controller Interfac e driver
Dec 12 06:51:16 freepbx kernel: usbcore: registered new interface driver usbseri al_generic
Dec 12 06:51:16 freepbx kernel: usbserial: USB Serial support registered for gen eric
Dec 12 06:51:16 freepbx kernel: i8042: PNP: No PS/2 controller found. Probing po rts directly.
Dec 12 06:51:16 freepbx kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 12 06:51:16 freepbx kernel: mousedev: PS/2 mouse device common for all mice
Dec 12 06:51:16 freepbx kernel: rtc_cmos 00:04: RTC can wake from S4
Dec 12 06:51:16 freepbx kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Dec 12 06:51:16 freepbx kernel: rtc_cmos 00:04: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Dec 12 06:51:16 freepbx kernel: cpuidle: using governor menu
Dec 12 06:51:16 freepbx kernel: hidraw: raw HID events driver (C) Jiri Kosina
Dec 12 06:51:16 freepbx kernel: usbcore: registered new interface driver usbhid
Dec 12 06:51:16 freepbx kernel: usbhid: USB HID core driver
Dec 12 06:51:16 freepbx kernel: drop_monitor: Initializing network drop monitor service
Dec 12 06:51:16 freepbx kernel: TCP: cubic registered
Dec 12 06:51:16 freepbx kernel: Initializing XFRM netlink socket
Dec 12 06:51:16 freepbx kernel: NET: Registered protocol family 10
Dec 12 06:51:16 freepbx kernel: NET: Registered protocol family 17
Dec 12 06:51:16 freepbx kernel: mpls_gso: MPLS GSO support
Dec 12 06:51:16 freepbx kernel: mce: Using 5 MCE banks
Dec 12 06:51:16 freepbx kernel: microcode: AMD CPU family 0xf not supported
my guess is you are repeatedly crashing (first at 6:36 then 6:51 ) further explore the log for the latest c rash
egrep -B5 "06:51:1[56]" /var/log/syslog
the B5 gives you the 5 lines before the grepped string, the match gives the couple of seconds of the boot brocess , the lines previous to those show the cause if known of the restart, absent of such cause malkes me suspect hardware like memory or interrupts
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.