[FreePBX] redirection to two external numbers

rmichalowski · May 18, 2022, 9:50am

Hi there,

I have a problem with setting up ring groups, the situation is as follows. A customer calls the sales office’s landline number and on the other side there are two employees who have business cell phones and I would like this call to be transferred randomly to one of these numbers. I created a group where I entered both of these numbers with the # sign at the end. I also set up a test IVR in “Destination if no answer” for testing purposes. And when I try to call the test number, I only hear the call signal for about 5s and then it transfers me to the IVR. As for the numbers that I entered into the group, there is no information about the incoming call and no response at all. Even if I enter only one number in the group, the situation is the same. Through misc destinations, I am able to redirect a call to an external number without any problems, but only one number. FreePBX 13.0.197.28

comtech · May 18, 2022, 3:36pm

https://wiki.freepbx.org/display/SUP/Providing+Great+Debug

rmichalowski · May 23, 2022, 10:09am

[2022-05-18 13:01:21] VERBOSE[3083][C-0000206e] netsock2.c: Using SIP RTP TOS bits 184
[2022-05-18 13:01:21] VERBOSE[3083][C-0000206e] netsock2.c: Using SIP RTP CoS mark 5
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [22XXXXX00@custom-get-did-from-sip:1] Goto(“SIP/Out1-00001f8e”, “from-pstn,XX88,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (from-pstn,XX88,1)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:1] Set(“SIP/Out1-00001f8e”, “__DIRECTION=INBOUND”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:2] Set(“SIP/Out1-00001f8e”, “CHANNEL(language)=pl”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:3] Gosub(“SIP/Out1-00001f8e”, “sub-record-check,s,1(in,XX88,force)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/Out1-00001f8e”, “0?initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:2] Set(“SIP/Out1-00001f8e”, “__REC_STATUS=INITIALIZED”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:3] Set(“SIP/Out1-00001f8e”, “NOW=1652871681”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:4] Set(“SIP/Out1-00001f8e”, “__DAY=18”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:5] Set(“SIP/Out1-00001f8e”, “__MONTH=05”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:6] Set(“SIP/Out1-00001f8e”, “__YEAR=2022”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:7] Set(“SIP/Out1-00001f8e”, “__TIMESTR=20220518-130121”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:8] Set(“SIP/Out1-00001f8e”, “__FROMEXTEN=unknown”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:9] Set(“SIP/Out1-00001f8e”, “__MON_FMT=WAV”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/Out1-00001f8e”, “Recordings initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/Out1-00001f8e”, “0?Set(ARG3=dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/Out1-00001f8e”, “REC_POLICY_MODE_SAVE=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/Out1-00001f8e”, “0?Set(REC_STATUS=NO)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/Out1-00001f8e”, “2?checkaction”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,s,17)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/Out1-00001f8e”, “1?sub-record-check,in,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,in,1)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [in@sub-record-check:1] NoOp(“SIP/Out1-00001f8e”, “Inbound Recording Check to XX88”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [in@sub-record-check:2] Set(“SIP/Out1-00001f8e”, “FROMEXTEN=unknown”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [in@sub-record-check:3] ExecIf(“SIP/Out1-00001f8e”, “9?Set(FROMEXTEN=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [in@sub-record-check:4] Gosub(“SIP/Out1-00001f8e”, “recordcheck,1(force,in,XX88)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/Out1-00001f8e”, “Starting recording check against force”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/Out1-00001f8e”, “force”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,recordcheck,5)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:5] Set(“SIP/Out1-00001f8e”, “__REC_POLICY_MODE=FORCE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:6] GotoIf(“SIP/Out1-00001f8e”, “1?startrec”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,recordcheck,16)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:16] NoOp(“SIP/Out1-00001f8e”, “Starting recording: in, XX88”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:17] Set(“SIP/Out1-00001f8e”, “__CALLFILENAME=in-XX88-XXX565-20220518-130121-1652871681.57270”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:18] MixMonitor(“SIP/Out1-00001f8e”, “2022/05/18/in-XX88-XXX565-20220518-130121-1652871681.57270.WAV,abi(LOCAL_MIXMON_ID),”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:19] Set(“SIP/Out1-00001f8e”, “__MIXMON_ID=0x7f3fff87b140”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:20] Set(“SIP/Out1-00001f8e”, “__RECORD_ID=SIP/Out1-00001f8e”) in new stack
[2022-05-18 13:01:21] VERBOSE[18255][C-0000206e] app_mixmonitor.c: Begin MixMonitor Recording SIP/Out1-00001f8e
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:21] Set(“SIP/Out1-00001f8e”, “__REC_STATUS=RECORDING”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:22] Set(“SIP/Out1-00001f8e”, “CDR(recordingfile)=in-XX88-XXX565-20220518-130121-1652871681.57270.WAV”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:23] Return(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [in@sub-record-check:5] Return(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:4] Set(“SIP/Out1-00001f8e”, “__FROM_DID=XX88”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:5] Set(“SIP/Out1-00001f8e”, “returnhere=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:6] Gosub(“SIP/Out1-00001f8e”, “app-blacklist-check,s,1()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@app-blacklist-check:1] GotoIf(“SIP/Out1-00001f8e”, “0?blacklisted”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@app-blacklist-check:2] Set(“SIP/Out1-00001f8e”, “CALLED_BLACKLIST=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@app-blacklist-check:3] Return(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:7] Set(“SIP/Out1-00001f8e”, “CDR(did)=XX88”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:8] GotoIf(“SIP/Out1-00001f8e”, “0?”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:9] ExecIf(“SIP/Out1-00001f8e”, “1 ?Set(CALLERID(name)=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:10] Set(“SIP/Out1-00001f8e”, “__MOHCLASS=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:11] Set(“SIP/Out1-00001f8e”, “__REVERSAL_REJECT=FALSE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:12] GotoIf(“SIP/Out1-00001f8e”, “1?post-reverse-charge”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (from-pstn,XX88,14)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:14] NoOp(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:15] Set(“SIP/Out1-00001f8e”, “__CALLINGNAMEPRES_SV=allowed_not_screened”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:16] Set(“SIP/Out1-00001f8e”, “__CALLINGNUMPRES_SV=allowed_not_screened”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:17] Set(“SIP/Out1-00001f8e”, “CALLERID(name-pres)=allowed_not_screened”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:18] Set(“SIP/Out1-00001f8e”, “CALLERID(num-pres)=allowed_not_screened”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:19] NoOp(“SIP/Out1-00001f8e”, “CallerID Entry Point”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [XX88@from-pstn:20] Goto(“SIP/Out1-00001f8e”, “ext-group,111,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (ext-group,111,1)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:1] GotoIf(“SIP/Out1-00001f8e”, “0?cid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:2] PlayTones(“SIP/Out1-00001f8e”, “ring”) in new stack
[2022-05-18 13:01:21] WARNING[18253][C-0000206e] translate.c: no samples for alawtolin
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:3] Progress(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:4] Macro(“SIP/Out1-00001f8e”, “user-callerid,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:1] Set(“SIP/Out1-00001f8e”, “TOUCH_MONITOR=1652871681.57270”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:2] Set(“SIP/Out1-00001f8e”, “AMPUSER=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:3] Set(“SIP/Out1-00001f8e”, “HOTDESCKCHAN=Out1-00001f8e”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:4] Set(“SIP/Out1-00001f8e”, “HOTDESKEXTEN=Out1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:5] Set(“SIP/Out1-00001f8e”, “HOTDESKCALL=0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:6] ExecIf(“SIP/Out1-00001f8e”, “0?Set(HOTDESKCALL=1)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:7] ExecIf(“SIP/Out1-00001f8e”, “0?Set(CALLERID(name)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:8] GotoIf(“SIP/Out1-00001f8e”, “0?report”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:9] ExecIf(“SIP/Out1-00001f8e”, “1?Set(REALCALLERIDNUM=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:10] Set(“SIP/Out1-00001f8e”, “AMPUSER=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:11] GotoIf(“SIP/Out1-00001f8e”, “0?limit”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:12] Set(“SIP/Out1-00001f8e”, “AMPUSERCIDNAME=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:13] ExecIf(“SIP/Out1-00001f8e”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:14] GotoIf(“SIP/Out1-00001f8e”, “1?report”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,21)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:21] NoOp(“SIP/Out1-00001f8e”, “Macro Depth is 1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:22] GotoIf(“SIP/Out1-00001f8e”, “1?report2:macroerror”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,23)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:23] GotoIf(“SIP/Out1-00001f8e”, “0?continue”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:24] ExecIf(“SIP/Out1-00001f8e”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:25] Set(“SIP/Out1-00001f8e”, “__TTL=64”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:26] GotoIf(“SIP/Out1-00001f8e”, “1?continue”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,42)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:42] Set(“SIP/Out1-00001f8e”, “CALLERID(number)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:43] Set(“SIP/Out1-00001f8e”, “CALLERID(name)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:44] GotoIf(“SIP/Out1-00001f8e”, “0?cnum”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:45] Set(“SIP/Out1-00001f8e”, “CDR(cnam)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:46] Set(“SIP/Out1-00001f8e”, “CDR(cnum)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-user-callerid:47] Set(“SIP/Out1-00001f8e”, “CHANNEL(language)=pl”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:5] Macro(“SIP/Out1-00001f8e”, “blkvm-setifempty,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-setifempty:1] GotoIf(“SIP/Out1-00001f8e”, “1?init”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (macro-blkvm-setifempty,s,4)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-setifempty:4] Set(“SIP/Out1-00001f8e”, “__BLKVM_CHANNEL=SIP/Out1-00001f8e”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-setifempty:5] Set(“SIP/Out1-00001f8e”, “SHARED(BLKVM,SIP/Out1-00001f8e)=TRUE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-setifempty:6] Set(“SIP/Out1-00001f8e”, “GOSUB_RETVAL=TRUE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-setifempty:7] MacroExit(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:6] GotoIf(“SIP/Out1-00001f8e”, “1?skipov”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (ext-group,111,9)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:9] Set(“SIP/Out1-00001f8e”, “RRNODEST=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:10] Set(“SIP/Out1-00001f8e”, “__NODEST=111”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:11] GosubIf(“SIP/Out1-00001f8e”, “0?sub-rgsetcid,s,1()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:12] Gosub(“SIP/Out1-00001f8e”, “sub-record-check,s,1(rg,111,dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/Out1-00001f8e”, “9?initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,s,10)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/Out1-00001f8e”, “Recordings initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/Out1-00001f8e”, “0?Set(ARG3=dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/Out1-00001f8e”, “REC_POLICY_MODE_SAVE=FORCE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/Out1-00001f8e”, “0?Set(REC_STATUS=NO)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/Out1-00001f8e”, “2?checkaction”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,s,17)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/Out1-00001f8e”, “0?sub-record-check,rg,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:18] NoOp(“SIP/Out1-00001f8e”, “Generic rg Recording Check - XXX565 111”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:19] Gosub(“SIP/Out1-00001f8e”, “recordcheck,1(dontcare,rg,111)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/Out1-00001f8e”, “Starting recording check against dontcare”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/Out1-00001f8e”, “dontcare”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-check:20] Return(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:13] Set(“SIP/Out1-00001f8e”, “RingGroupMethod=ringall”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:14] Macro(“SIP/Out1-00001f8e”, “dial-confirm,30,Ttr,48XXX851#-48XXX164#,111”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:1] Set(“SIP/Out1-00001f8e”, “DB(RG/111/SIP/Out1-00001f8e)=RINGING”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:2] Set(“SIP/Out1-00001f8e”, “__UNIQCHAN=SIP/Out1-00001f8e”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:3] Set(“SIP/Out1-00001f8e”, “USE_CONFIRMATION=TRUE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:4] Set(“SIP/Out1-00001f8e”, “RINGGROUP_INDEX=111”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:5] Set(“SIP/Out1-00001f8e”, “FORCE_CONFIRM=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:6] Set(“SIP/Out1-00001f8e”, “ARG4=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:7] Macro(“SIP/Out1-00001f8e”, “dial,30,Ttr,48XXX851#-48XXX164#”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:1] NoOp(“SIP/Out1-00001f8e”, "Blind Transfer: , Attended Transfer: , User: , Alert Info: ") in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:2] ExecIf(“SIP/Out1-00001f8e”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:3] ExecIf(“SIP/Out1-00001f8e”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:4] ExecIf(“SIP/Out1-00001f8e”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:5] ExecIf(“SIP/Out1-00001f8e”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:6] AGI(“SIP/Out1-00001f8e”, “dialparties.agi”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Caller ID name is ‘XXX565’ number is ‘XXX565’
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: CW Ignore is:
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: CF Ignore is:
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: CW IN_USE/BUSY is: 1
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Methodology of ring is ‘ringall’
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Added extension 48XXX851# to extension map
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Added extension 48XXX164# to extension map
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Extension 48XXX851# cf is disabled
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Extension 48XXX164# cf is disabled
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: dialparties.agi: Filtered ARG3: 48XXX851-48XXX164
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] res_agi.c: <SIP/Out1-00001f8e>AGI Script dialparties.agi completed, returning 0
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:9] NoOp(“SIP/Out1-00001f8e”, “Returned from dialparties with groups to dial”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:10] NoOp(“SIP/Out1-00001f8e”, "ringall array ") in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:11] Set(“SIP/Out1-00001f8e”, “__FMGL_DIAL=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:12] Set(“SIP/Out1-00001f8e”, “LOOPCNT=2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:13] Set(“SIP/Out1-00001f8e”, “ITER=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:14] Set(“SIP/Out1-00001f8e”, “__EXTTOCALL=48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:15] NoOp(“SIP/Out1-00001f8e”, “Working with 48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:16] ExecIf(“SIP/Out1-00001f8e”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:17] ExecIf(“SIP/Out1-00001f8e”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:18] Set(“SIP/Out1-00001f8e”, “ITER=2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:19] GotoIf(“SIP/Out1-00001f8e”, “1?ndloopbegin”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (macro-dial,s,14)
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:14] Set(“SIP/Out1-00001f8e”, “__EXTTOCALL=48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:15] NoOp(“SIP/Out1-00001f8e”, “Working with 48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:16] ExecIf(“SIP/Out1-00001f8e”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:17] ExecIf(“SIP/Out1-00001f8e”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:18] Set(“SIP/Out1-00001f8e”, “ITER=3”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:19] GotoIf(“SIP/Out1-00001f8e”, “0?ndloopbegin”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:20] Macro(“SIP/Out1-00001f8e”, “dial-ringall-predial-hook,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-ringall-predial-hook:1] MacroExit(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:21] ExecIf(“SIP/Out1-00001f8e”, “0?Set(ds=Local/RG-111*-48XXX851#@from-internal&Local/RG-111*-48XXX164#@from-internal,30,trg)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:22] Dial(“SIP/Out1-00001f8e”, “Local/RG-111*-48XXX851#@from-internal&Local/RG-111*-48XXX164#@from-internal,30,trb(func-apply-sipheaders^s^1),”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_stack.c: Local/RG-111*-48XXX851#@from-internal-00000068;1 Internal Gosub(func-apply-sipheaders,s,1) start
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp(“Local/RG-111*-48XXX851#@from-internal-00000068;1”, “Applying SIP Headers to channel Local/RG-111*-48XXX851#@from-internal-00000068;1”) in new stack

rmichalowski · May 23, 2022, 10:11am

[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:2] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;1”, “TECH=Local”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;1”, “SIPHEADERKEYS=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“Local/RG-111*-48XXX851#@from-internal-00000068;1”, “0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_while.c: Jumping to priority 10
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:11] Return(“Local/RG-111*-48XXX851#@from-internal-00000068;1”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_stack.c: Spawn extension (from-internal, 111, 1) exited non-zero on ‘Local/RG-111*-48XXX851#@from-internal-00000068;1’
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_stack.c: Local/RG-111*-48XXX851#@from-internal-00000068;1 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_stack.c: Local/RG-111*-48XXX164#@from-internal-00000069;1 Internal Gosub(func-apply-sipheaders,s,1) start
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp(“Local/RG-111*-48XXX164#@from-internal-00000069;1”, “Applying SIP Headers to channel Local/RG-111*-48XXX164#@from-internal-00000069;1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:2] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;1”, “TECH=Local”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;1”, “SIPHEADERKEYS=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“Local/RG-111*-48XXX164#@from-internal-00000069;1”, “0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_while.c: Jumping to priority 10
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:11] Return(“Local/RG-111*-48XXX164#@from-internal-00000069;1”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_stack.c: Spawn extension (from-internal, 111, 1) exited non-zero on ‘Local/RG-111*-48XXX164#@from-internal-00000069;1’
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_stack.c: Local/RG-111*-48XXX164#@from-internal-00000069;1 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_dial.c: Called Local/RG-111*-48XXX851#@from-internal
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_dial.c: Called Local/RG-111*-48XXX164#@from-internal
[2022-05-18 13:01:21] WARNING[18253][C-0000206e] translate.c: no samples for alawtolin
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [RG-111*-48XXX164#@from-internal:1] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “CDR_PROP(disable)=true”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [RG-111*-48XXX851#@from-internal:1] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “CDR_PROP(disable)=true”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [RG-111*-48XXX164#@from-internal:2] Macro(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “dial,30,TtrM(confirm^^^111),-48XXX164#”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [RG-111*-48XXX851#@from-internal:2] Macro(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “dial,30,TtrM(confirm^^^111),-48XXX851#”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:1] NoOp(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, "Blind Transfer: , Attended Transfer: , User: , Alert Info: ") in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:1] NoOp(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, "Blind Transfer: , Attended Transfer: , User: , Alert Info: ") in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:2] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:2] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:3] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:3] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:4] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:4] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(ALERT_INFO=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:5] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:5] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:6] AGI(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “dialparties.agi”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:6] AGI(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “dialparties.agi”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Caller ID name is ‘XXX565’ number is ‘XXX565’
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: CW Ignore is:
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: CF Ignore is:
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: CW IN_USE/BUSY is: 1
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Methodology of ring is ‘none’
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Added extension to extension map
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Added extension 48XXX851# to extension map
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Extension cf is disabled
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Extension 48XXX851# cf is disabled
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Extension do not disturb is disabled
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: EXTENSION_STATE: 1 (INUSE_ORIGINATOR)
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Extension has ExtensionState: 1
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Checking CW and CFB status for extension
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Extension is not available to be called
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Extension has call waiting disabled
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: dialparties.agi: Filtered ARG3: 48XXX851
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] res_agi.c: <Local/RG-111*-48XXX851#@from-internal-00000068;2>AGI Script dialparties.agi completed, returning 0
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:9] NoOp(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “Returned from dialparties with groups to dial”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:10] NoOp(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, "ringall array ") in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:11] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “__FMGL_DIAL=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:12] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “LOOPCNT=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:13] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “ITER=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:14] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “__EXTTOCALL=48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:15] NoOp(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “Working with 48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:16] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:17] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:18] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “ITER=2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:19] GotoIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?ndloopbegin”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:20] Macro(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “dial-ringall-predial-hook,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial-ringall-predial-hook:1] MacroExit(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:21] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(ds=Local/48XXX851@from-internal/n,30,trM(confirm^^^111)g)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:22] Dial(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “Local/48XXX851@from-internal/n,30,trM(confirm^^^111)b(func-apply-sipheaders^s^1),”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Caller ID name is ‘XXX565’ number is ‘XXX565’
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: CW Ignore is:
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: CF Ignore is:
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: CW IN_USE/BUSY is: 1
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] app_stack.c: Local/48XXX851@from-internal-0000006a;1 Internal Gosub(func-apply-sipheaders,s,1) start
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp(“Local/48XXX851@from-internal-0000006a;1”, “Applying SIP Headers to channel Local/48XXX851@from-internal-0000006a;1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:2] Set(“Local/48XXX851@from-internal-0000006a;1”, “TECH=Local”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“Local/48XXX851@from-internal-0000006a;1”, “SIPHEADERKEYS=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“Local/48XXX851@from-internal-0000006a;1”, “0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] app_while.c: Jumping to priority 10
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:11] Return(“Local/48XXX851@from-internal-0000006a;1”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] app_stack.c: Spawn extension (from-internal, RG-111*-48XXX851#, 1) exited non-zero on ‘Local/48XXX851@from-internal-0000006a;1’
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] app_stack.c: Local/48XXX851@from-internal-0000006a;1 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Methodology of ring is ‘none’
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Added extension to extension map
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Added extension 48XXX164# to extension map
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] app_dial.c: Called Local/48XXX851@from-internal/n
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_dial.c: Local/RG-111*-48XXX851#@from-internal-00000068;1 is ringing
[2022-05-18 13:01:21] WARNING[18253][C-0000206e] translate.c: no samples for alawtolin
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:1] Macro(“Local/48XXX851@from-internal-0000006a;2”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:1] Set(“Local/48XXX851@from-internal-0000006a;2”, “TOUCH_MONITOR=1652871681.57283”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:2] Set(“Local/48XXX851@from-internal-0000006a;2”, “AMPUSER=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:3] Set(“Local/48XXX851@from-internal-0000006a;2”, “HOTDESCKCHAN=48XXX851@from-internal-0000006a;2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:4] Set(“Local/48XXX851@from-internal-0000006a;2”, “HOTDESKEXTEN=48XXX851@from”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:5] Set(“Local/48XXX851@from-internal-0000006a;2”, “HOTDESKCALL=0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:6] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(HOTDESKCALL=1)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:7] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CALLERID(name)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:8] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?report”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:9] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Set(REALCALLERIDNUM=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:10] Set(“Local/48XXX851@from-internal-0000006a;2”, “AMPUSER=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:11] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?limit”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:12] Set(“Local/48XXX851@from-internal-0000006a;2”, “AMPUSERCIDNAME=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:13] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:14] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?report”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,21)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:21] NoOp(“Local/48XXX851@from-internal-0000006a;2”, “Macro Depth is 1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:22] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?report2:macroerror”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,23)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:23] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?continue”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,42)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:42] Set(“Local/48XXX851@from-internal-0000006a;2”, “CALLERID(number)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:43] Set(“Local/48XXX851@from-internal-0000006a;2”, “CALLERID(name)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:44] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?cnum”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:45] Set(“Local/48XXX851@from-internal-0000006a;2”, “CDR(cnam)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:46] Set(“Local/48XXX851@from-internal-0000006a;2”, “CDR(cnum)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-user-callerid:47] Set(“Local/48XXX851@from-internal-0000006a;2”, “CHANNEL(language)=pl”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:2] Gosub(“Local/48XXX851@from-internal-0000006a;2”, “sub-record-check,s,1(out,48XXX851,dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:1] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:2] Set(“Local/48XXX851@from-internal-0000006a;2”, “__REC_STATUS=INITIALIZED”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Extension cf is disabled
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:3] Set(“Local/48XXX851@from-internal-0000006a;2”, “NOW=1652871681”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:4] Set(“Local/48XXX851@from-internal-0000006a;2”, “__DAY=18”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Extension 48XXX164# cf is disabled
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:5] Set(“Local/48XXX851@from-internal-0000006a;2”, “__MONTH=05”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Extension do not disturb is disabled
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:6] Set(“Local/48XXX851@from-internal-0000006a;2”, “__YEAR=2022”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:7] Set(“Local/48XXX851@from-internal-0000006a;2”, “__TIMESTR=20220518-130121”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:8] Set(“Local/48XXX851@from-internal-0000006a;2”, “__FROMEXTEN=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:9] Set(“Local/48XXX851@from-internal-0000006a;2”, “__MON_FMT=WAV”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:10] NoOp(“Local/48XXX851@from-internal-0000006a;2”, “Recordings initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:11] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(ARG3=dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:12] Set(“Local/48XXX851@from-internal-0000006a;2”, “REC_POLICY_MODE_SAVE=FORCE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:13] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(REC_STATUS=NO)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:14] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “3?checkaction”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (sub-record-check,s,17)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-record-check:17] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?sub-record-check,out,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (sub-record-check,out,1)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [out@sub-record-check:1] NoOp(“Local/48XXX851@from-internal-0000006a;2”, “Outbound Recording Check from XXX565 to 48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [out@sub-record-check:2] Set(“Local/48XXX851@from-internal-0000006a;2”, “RECMODE=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: EXTENSION_STATE: 1 (INUSE_ORIGINATOR)
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Extension has ExtensionState: 1
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [out@sub-record-check:3] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Goto(routewins)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Checking CW and CFB status for extension
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Extension is not available to be called
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Extension has call waiting disabled
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (sub-record-check,out,7)
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: dialparties.agi: Filtered ARG3: 48XXX164
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [out@sub-record-check:7] Gosub(“Local/48XXX851@from-internal-0000006a;2”, “recordcheck,1(dontcare,out,48XXX851)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“Local/48XXX851@from-internal-0000006a;2”, “Starting recording check against dontcare”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“Local/48XXX851@from-internal-0000006a;2”, “dontcare”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“Local/48XXX851@from-internal-0000006a;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [out@sub-record-check:8] Return(“Local/48XXX851@from-internal-0000006a;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] res_agi.c: <Local/RG-111*-48XXX164#@from-internal-00000069;2>AGI Script dialparties.agi completed, returning 0
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:3] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:4] Set(“Local/48XXX851@from-internal-0000006a;2”, “_ROUTEID=7”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:5] Set(“Local/48XXX851@from-internal-0000006a;2”, “_ROUTENAME=Ksiegowosc-NAPOLLO”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:6] Set(“Local/48XXX851@from-internal-0000006a;2”, “MOHCLASS=default”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:7] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(TRUNKCIDOVERRIDE=224171516)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:8] Set(“Local/48XXX851@from-internal-0000006a;2”, “_CALLERIDNAMEINTERNAL=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:9] Set(“Local/48XXX851@from-internal-0000006a;2”, “_CALLERIDNUMINTERNAL=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:10] Set(“Local/48XXX851@from-internal-0000006a;2”, “_EMAILNOTIFICATION=FALSE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:11] Set(“Local/48XXX851@from-internal-0000006a;2”, “_NODEST=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:12] Macro(“Local/48XXX851@from-internal-0000006a;2”, “dialout-trunk,2,48XXX851,on”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:1] Set(“Local/48XXX851@from-internal-0000006a;2”, “DIAL_TRUNK=2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:2] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Set(DIAL_OPTIONS=tr)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:3] GosubIf(“Local/48XXX851@from-internal-0000006a;2”, “0?sub-pincheck,s,1()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:9] NoOp(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “Returned from dialparties with groups to dial”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:10] NoOp(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, "ringall array ") in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:11] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “__FMGL_DIAL=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:12] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “LOOPCNT=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:13] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “ITER=1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:14] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “__EXTTOCALL=48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:15] NoOp(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “Working with 48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:16] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:17] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:18] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “ITER=2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:19] GotoIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?ndloopbegin”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:20] Macro(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “dial-ringall-predial-hook,”) in new stack

rmichalowski · May 23, 2022, 10:12am

[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial-ringall-predial-hook:1] MacroExit(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:21] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(ds=Local/48XXX164@from-internal/n,30,trM(confirm^^^111)g)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:22] Dial(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “Local/48XXX164@from-internal/n,30,trM(confirm^^^111)b(func-apply-sipheaders^s^1),”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] app_stack.c: Local/48XXX164@from-internal-0000006b;1 Internal Gosub(func-apply-sipheaders,s,1) start
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp(“Local/48XXX164@from-internal-0000006b;1”, “Applying SIP Headers to channel Local/48XXX164@from-internal-0000006b;1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:2] Set(“Local/48XXX164@from-internal-0000006b;1”, “TECH=Local”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“Local/48XXX164@from-internal-0000006b;1”, “SIPHEADERKEYS=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“Local/48XXX164@from-internal-0000006b;1”, “0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] app_while.c: Jumping to priority 10
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:11] Return(“Local/48XXX164@from-internal-0000006b;1”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] app_stack.c: Spawn extension (from-internal, RG-111*-48XXX164#, 1) exited non-zero on ‘Local/48XXX164@from-internal-0000006b;1’
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] app_stack.c: Local/48XXX164@from-internal-0000006b;1 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:4] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?disabletrunk,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:5] Set(“Local/48XXX851@from-internal-0000006a;2”, “DIAL_NUMBER=48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:6] Set(“Local/48XXX851@from-internal-0000006a;2”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] app_dial.c: Called Local/48XXX164@from-internal/n
[2022-05-18 13:01:21] VERBOSE[18253][C-0000206e] app_dial.c: Local/RG-111*-48XXX164#@from-internal-00000069;1 is ringing
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:1] Macro(“Local/48XXX164@from-internal-0000006b;2”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:7] Set(“Local/48XXX851@from-internal-0000006a;2”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:1] Set(“Local/48XXX164@from-internal-0000006b;2”, “TOUCH_MONITOR=1652871681.57287”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:2] Set(“Local/48XXX164@from-internal-0000006b;2”, “AMPUSER=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:8] Set(“Local/48XXX851@from-internal-0000006a;2”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:9] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?nomax”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-dialout-trunk,s,11)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:11] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?skipoutcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:3] Set(“Local/48XXX164@from-internal-0000006b;2”, “HOTDESCKCHAN=48XXX164@from-internal-0000006b;2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:12] Macro(“Local/48XXX851@from-internal-0000006a;2”, “outbound-callerid,2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:4] Set(“Local/48XXX164@from-internal-0000006b;2”, “HOTDESKEXTEN=48XXX164@from”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:1] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Set(CALLERPRES(name-pres)=allowed_not_screened)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:5] Set(“Local/48XXX164@from-internal-0000006b;2”, “HOTDESKCALL=0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:2] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Set(CALLERPRES(num-pres)=allowed_not_screened)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:3] Set(“Local/48XXX851@from-internal-0000006a;2”, “ALLOWTHISROUTE=NO”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:6] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(HOTDESKCALL=1)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:7] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CALLERID(name)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:4] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(ALLOWTHISROUTE=YES)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:8] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?report”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:9] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Set(REALCALLERIDNUM=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:5] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Hangup()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:10] Set(“Local/48XXX164@from-internal-0000006b;2”, “AMPUSER=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:6] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(REALCALLERIDNUM=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:11] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?limit”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:12] Set(“Local/48XXX164@from-internal-0000006b;2”, “AMPUSERCIDNAME=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:7] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(AMPUSER=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:13] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:8] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?normcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:14] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?report”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:9] Set(“Local/48XXX851@from-internal-0000006a;2”, "USEROUTCID=XXX565 ") in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,21)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:21] NoOp(“Local/48XXX164@from-internal-0000006b;2”, “Macro Depth is 1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:10] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?normcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:22] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?report2:macroerror”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:11] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?bypass”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,23)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:23] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?continue”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-outbound-callerid,s,13)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:13] Set(“Local/48XXX851@from-internal-0000006a;2”, “EMERGENCYCID=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-user-callerid,s,42)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:42] Set(“Local/48XXX164@from-internal-0000006b;2”, “CALLERID(number)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:14] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(EMERGENCYCID=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:43] Set(“Local/48XXX164@from-internal-0000006b;2”, “CALLERID(name)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:15] Set(“Local/48XXX851@from-internal-0000006a;2”, “TRUNKOUTCID=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:44] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?cnum”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:45] Set(“Local/48XXX164@from-internal-0000006b;2”, “CDR(cnam)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:16] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?trunkcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-outbound-callerid,s,22)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:46] Set(“Local/48XXX164@from-internal-0000006b;2”, “CDR(cnum)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:22] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CALLERID(all)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-user-callerid:47] Set(“Local/48XXX164@from-internal-0000006b;2”, “CHANNEL(language)=pl”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:23] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Set(CALLERID(all)=XXX565 )”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:24] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CALLERID(all)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:25] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:2] Gosub(“Local/48XXX164@from-internal-0000006b;2”, “sub-record-check,s,1(out,48XXX164,dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:26] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:1] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:27] Set(“Local/48XXX851@from-internal-0000006a;2”, “CDR(outbound_cnum)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:2] Set(“Local/48XXX164@from-internal-0000006b;2”, “__REC_STATUS=INITIALIZED”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:3] Set(“Local/48XXX164@from-internal-0000006b;2”, “NOW=1652871681”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:28] Set(“Local/48XXX851@from-internal-0000006a;2”, “CDR(outbound_cnam)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:4] Set(“Local/48XXX164@from-internal-0000006b;2”, “__DAY=18”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:5] Set(“Local/48XXX164@from-internal-0000006b;2”, “__MONTH=05”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:13] GosubIf(“Local/48XXX851@from-internal-0000006a;2”, “1?sub-flp-2,s,1()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:6] Set(“Local/48XXX164@from-internal-0000006b;2”, “__YEAR=2022”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-flp-2:1] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Return()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:7] Set(“Local/48XXX164@from-internal-0000006b;2”, “__TIMESTR=20220518-130121”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:8] Set(“Local/48XXX164@from-internal-0000006b;2”, “__FROMEXTEN=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:9] Set(“Local/48XXX164@from-internal-0000006b;2”, “__MON_FMT=WAV”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:10] NoOp(“Local/48XXX164@from-internal-0000006b;2”, “Recordings initialized”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:11] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(ARG3=dontcare)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:12] Set(“Local/48XXX164@from-internal-0000006b;2”, “REC_POLICY_MODE_SAVE=FORCE”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:13] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(REC_STATUS=NO)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:14] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “3?checkaction”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@sub-flp-2:2] Return(“Local/48XXX851@from-internal-0000006a;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (sub-record-check,s,17)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-record-check:17] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?sub-record-check,out,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:14] Set(“Local/48XXX851@from-internal-0000006a;2”, “OUTNUM=48XXX851”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (sub-record-check,out,1)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [out@sub-record-check:1] NoOp(“Local/48XXX164@from-internal-0000006b;2”, “Outbound Recording Check from XXX565 to 48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [out@sub-record-check:2] Set(“Local/48XXX164@from-internal-0000006b;2”, “RECMODE=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:15] Set(“Local/48XXX851@from-internal-0000006a;2”, “custom=SIP/Out1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [out@sub-record-check:3] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Goto(routewins)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:16] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (sub-record-check,out,7)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [out@sub-record-check:7] Gosub(“Local/48XXX164@from-internal-0000006b;2”, “recordcheck,1(dontcare,out,48XXX164)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:17] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“Local/48XXX164@from-internal-0000006b;2”, “Starting recording check against dontcare”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“Local/48XXX164@from-internal-0000006b;2”, “dontcare”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“Local/48XXX164@from-internal-0000006b;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:18] Macro(“Local/48XXX851@from-internal-0000006a;2”, “dialout-trunk-predial-hook,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [out@sub-record-check:8] Return(“Local/48XXX164@from-internal-0000006b;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“Local/48XXX851@from-internal-0000006a;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:3] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:19] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?bypass,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:20] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CONNECTEDLINE(num,i)=48XXX851)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:4] Set(“Local/48XXX164@from-internal-0000006b;2”, “_ROUTEID=7”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:21] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CONNECTEDLINE(name,i)=CID:XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:22] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:5] Set(“Local/48XXX164@from-internal-0000006b;2”, “_ROUTENAME=Ksiegowosc-NAPOLLO”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:23] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?customtrunk”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:24] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “1?Set(DIAL_TRUNK_OPTIONS=t)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:6] Set(“Local/48XXX164@from-internal-0000006b;2”, “MOHCLASS=default”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:25] Set(“Local/48XXX851@from-internal-0000006a;2”, “HASH(__SIPHEADERS,Alert-Info)=unset”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:26] Dial(“Local/48XXX851@from-internal-0000006a;2”, “SIP/Out1/48XXX851,300,tb(func-apply-sipheaders^s^1,(2))U(sub-send-obroute-email^48XXX851^48XXX851^2^1652871681^XXX565^XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:7] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(TRUNKCIDOVERRIDE=224171516)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] netsock2.c: Using SIP RTP TOS bits 184
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] netsock2.c: Using SIP RTP CoS mark 5
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:8] Set(“Local/48XXX164@from-internal-0000006b;2”, “_CALLERIDNAMEINTERNAL=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:9] Set(“Local/48XXX164@from-internal-0000006b;2”, “_CALLERIDNUMINTERNAL=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:10] Set(“Local/48XXX164@from-internal-0000006b;2”, “_EMAILNOTIFICATION=FALSE”) in new stack
[2022-05-18 13:01:21] VERBOSE[3083][C-0000206f] netsock2.c: Using SIP RTP TOS bits 184
[2022-05-18 13:01:21] VERBOSE[3083][C-0000206f] netsock2.c: Using SIP RTP CoS mark 5
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [500441519471676@from-sip-external:1] NoOp(“SIP/10.0.20.2-00001f90”, “Received incoming SIP connection from unknown peer to 500441519471676”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [500441519471676@from-sip-external:2] Set(“SIP/10.0.20.2-00001f90”, “DID=500441519471676”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:11] Set(“Local/48XXX164@from-internal-0000006b;2”, “_NODEST=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:12] Macro(“Local/48XXX164@from-internal-0000006b;2”, “dialout-trunk,2,48XXX164,on”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [500441519471676@from-sip-external:3] Goto(“SIP/10.0.20.2-00001f90”, “s,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx_builtins.c: Goto (from-sip-external,s,1)
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-sip-external:1] GotoIf(“SIP/10.0.20.2-00001f90”, “1?setlanguage:checkanon”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:1] Set(“Local/48XXX164@from-internal-0000006b;2”, “DIAL_TRUNK=2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx_builtins.c: Goto (from-sip-external,s,2)
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-sip-external:2] Set(“SIP/10.0.20.2-00001f90”, “CHANNEL(language)=pl”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:2] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Set(DIAL_OPTIONS=tr)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-sip-external:3] GotoIf(“SIP/10.0.20.2-00001f90”, “0?noanonymous”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-sip-external:4] Goto(“SIP/10.0.20.2-00001f90”, “from-trunk,500441519471676,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx_builtins.c: Goto (from-trunk,500441519471676,1)
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [500441519471676@from-trunk:1] Set(“SIP/10.0.20.2-00001f90”, “__FROM_DID=500441519471676”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] app_stack.c: SIP/Out1-00001f8f Internal Gosub(func-apply-sipheaders,s,1(2)) start
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:3] GosubIf(“Local/48XXX164@from-internal-0000006b;2”, “0?sub-pincheck,s,1()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp(“SIP/Out1-00001f8f”, “Applying SIP Headers to channel SIP/Out1-00001f8f”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:2] Set(“SIP/Out1-00001f8f”, “TECH=SIP”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [500441519471676@from-trunk:2] NoOp(“SIP/10.0.20.2-00001f90”, “Received an unknown call with DID set to 500441519471676”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:4] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?disabletrunk,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“SIP/Out1-00001f8f”, “SIPHEADERKEYS=Alert-Info”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [500441519471676@from-trunk:3] Goto(“SIP/10.0.20.2-00001f90”, “s,a2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:5] Set(“Local/48XXX164@from-internal-0000006b;2”, “DIAL_NUMBER=48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx_builtins.c: Goto (from-trunk,s,2)
[2022-05-18 13:01:21] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-trunk:2] Answer(“SIP/10.0.20.2-00001f90”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:6] Set(“Local/48XXX164@from-internal-0000006b;2”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“SIP/Out1-00001f8f”, “1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:7] Set(“Local/48XXX164@from-internal-0000006b;2”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:8] Set(“Local/48XXX164@from-internal-0000006b;2”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:5] Set(“SIP/Out1-00001f8f”, “sipheader=unset”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:6] ExecIf(“SIP/Out1-00001f8f”, “1?SIPRemoveHeader(Alert-Info:)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:9] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?nomax”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-dialout-trunk,s,11)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:7] ExecIf(“SIP/Out1-00001f8f”, “0?Set(sipheader=http://127.0.0.1;info=unset)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:11] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?skipoutcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:12] Macro(“Local/48XXX164@from-internal-0000006b;2”, “outbound-callerid,2”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:8] ExecIf(“SIP/Out1-00001f8f”, “0?Set(sipheader=http://127.0.0.1unset)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:1] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Set(CALLERPRES(name-pres)=allowed_not_screened)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:9] ExecIf(“SIP/Out1-00001f8f”, “0?SIPAddHeader(Alert-Info:unset)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:10] EndWhile(“SIP/Out1-00001f8f”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:2] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Set(CALLERPRES(num-pres)=allowed_not_screened)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“SIP/Out1-00001f8f”, “0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:3] Set(“Local/48XXX164@from-internal-0000006b;2”, “ALLOWTHISROUTE=NO”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:11] Return(“SIP/Out1-00001f8f”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:4] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(ALLOWTHISROUTE=YES)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] app_stack.c: Spawn extension (custom-get-did-from-sip, 48XXX851, 1) exited non-zero on ‘SIP/Out1-00001f8f’
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] app_stack.c: SIP/Out1-00001f8f Internal Gosub(func-apply-sipheaders,s,1(2)) complete GOSUB_RETVAL=
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:5] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Hangup()”) in new stack

rmichalowski · May 23, 2022, 10:12am

[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:6] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(REALCALLERIDNUM=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:7] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(AMPUSER=XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] app_dial.c: Called SIP/Out1/48XXX851
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:8] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?normcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:9] Set(“Local/48XXX164@from-internal-0000006b;2”, "USEROUTCID=XXX565 ") in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:10] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?normcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:11] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?bypass”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-outbound-callerid,s,13)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:13] Set(“Local/48XXX164@from-internal-0000006b;2”, “EMERGENCYCID=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:14] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(EMERGENCYCID=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:15] Set(“Local/48XXX164@from-internal-0000006b;2”, “TRUNKOUTCID=”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:16] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?trunkcid”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-outbound-callerid,s,22)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:22] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CALLERID(all)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:23] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Set(CALLERID(all)=XXX565 )”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:24] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CALLERID(all)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:25] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:26] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:27] Set(“Local/48XXX164@from-internal-0000006b;2”, “CDR(outbound_cnum)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outbound-callerid:28] Set(“Local/48XXX164@from-internal-0000006b;2”, “CDR(outbound_cnam)=XXX565”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:13] GosubIf(“Local/48XXX164@from-internal-0000006b;2”, “1?sub-flp-2,s,1()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-flp-2:1] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Return()”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@sub-flp-2:2] Return(“Local/48XXX164@from-internal-0000006b;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:14] Set(“Local/48XXX164@from-internal-0000006b;2”, “OUTNUM=48XXX164”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:15] Set(“Local/48XXX164@from-internal-0000006b;2”, “custom=SIP/Out1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:16] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:17] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:18] Macro(“Local/48XXX164@from-internal-0000006b;2”, “dialout-trunk-predial-hook,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“Local/48XXX164@from-internal-0000006b;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:19] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?bypass,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:20] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CONNECTEDLINE(num,i)=48XXX164)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:21] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CONNECTEDLINE(name,i)=CID:XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:22] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:23] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?customtrunk”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:24] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “1?Set(DIAL_TRUNK_OPTIONS=t)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:25] Set(“Local/48XXX164@from-internal-0000006b;2”, “HASH(__SIPHEADERS,Alert-Info)=unset”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:26] Dial(“Local/48XXX164@from-internal-0000006b;2”, “SIP/Out1/48XXX164,300,tb(func-apply-sipheaders^s^1,(2))U(sub-send-obroute-email^48XXX164^48XXX164^2^1652871681^XXX565^XXX565)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] netsock2.c: Using SIP RTP TOS bits 184
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] netsock2.c: Using SIP RTP CoS mark 5
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] app_stack.c: SIP/Out1-00001f91 Internal Gosub(func-apply-sipheaders,s,1(2)) start
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp(“SIP/Out1-00001f91”, “Applying SIP Headers to channel SIP/Out1-00001f91”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:2] Set(“SIP/Out1-00001f91”, “TECH=SIP”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“SIP/Out1-00001f91”, “SIPHEADERKEYS=Alert-Info”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“SIP/Out1-00001f91”, “1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:5] Set(“SIP/Out1-00001f91”, “sipheader=unset”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:6] ExecIf(“SIP/Out1-00001f91”, “1?SIPRemoveHeader(Alert-Info:)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:7] ExecIf(“SIP/Out1-00001f91”, “0?Set(sipheader=http://127.0.0.1;info=unset)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:8] ExecIf(“SIP/Out1-00001f91”, “0?Set(sipheader=http://127.0.0.1unset)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:9] ExecIf(“SIP/Out1-00001f91”, “0?SIPAddHeader(Alert-Info:unset)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:10] EndWhile(“SIP/Out1-00001f91”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:4] While(“SIP/Out1-00001f91”, “0”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@func-apply-sipheaders:11] Return(“SIP/Out1-00001f91”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] app_stack.c: Spawn extension (custom-get-did-from-sip, 48XXX164, 1) exited non-zero on ‘SIP/Out1-00001f91’
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] app_stack.c: SIP/Out1-00001f91 Internal Gosub(func-apply-sipheaders,s,1(2)) complete GOSUB_RETVAL=
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] app_dial.c: Called SIP/Out1/48XXX164
[2022-05-18 13:01:21] VERBOSE[3083][C-0000206e] chan_sip.c: Got SIP response 604 “Does not exist anywhere” back from 87.204.129.4:5060
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:27] NoOp(“Local/48XXX851@from-internal-0000006a;2”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:28] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?continue,1:s-CHANUNAVAIL,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-dialout-trunk,continue,1)
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [continue@macro-dialout-trunk:1] NoOp(“Local/48XXX851@from-internal-0000006a;2”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 1 - failing through to other trunks”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [continue@macro-dialout-trunk:2] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CALLERID(number)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [48XXX851@from-internal:13] Macro(“Local/48XXX851@from-internal-0000006a;2”, “outisbusy,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outisbusy:1] Progress(“Local/48XXX851@from-internal-0000006a;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outisbusy:2] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?emergency,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18261][C-0000206e] app_dial.c: Local/48XXX851@from-internal-0000006a;1 is making progress passing it to Local/RG-111*-48XXX851#@from-internal-00000068;2
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outisbusy:3] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “0?intracompany,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outisbusy:4] Playback(“Local/48XXX851@from-internal-0000006a;2”, “all-circuits-busy-now&please-try-call-later, noanswer”) in new stack
[2022-05-18 13:01:21] VERBOSE[18269][C-0000206e] file.c: <Local/48XXX851@from-internal-0000006a;2> Playing ‘all-circuits-busy-now.ulaw’ (language ‘pl’)
[2022-05-18 13:01:21] VERBOSE[3083][C-0000206e] chan_sip.c: Got SIP response 604 “Does not exist anywhere” back from 87.204.129.4:5060
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:27] NoOp(“Local/48XXX164@from-internal-0000006b;2”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-dialout-trunk:28] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?continue,1:s-CHANUNAVAIL,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-dialout-trunk,continue,1)
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [continue@macro-dialout-trunk:1] NoOp(“Local/48XXX164@from-internal-0000006b;2”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 1 - failing through to other trunks”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [continue@macro-dialout-trunk:2] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CALLERID(number)=)”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [48XXX164@from-internal:13] Macro(“Local/48XXX164@from-internal-0000006b;2”, “outisbusy,”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outisbusy:1] Progress(“Local/48XXX164@from-internal-0000006b;2”, “”) in new stack
[2022-05-18 13:01:21] VERBOSE[18262][C-0000206e] app_dial.c: Local/48XXX164@from-internal-0000006b;1 is making progress passing it to Local/RG-111*-48XXX164#@from-internal-00000069;2
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outisbusy:2] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?emergency,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outisbusy:3] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “0?intracompany,1”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outisbusy:4] Playback(“Local/48XXX164@from-internal-0000006b;2”, “all-circuits-busy-now&please-try-call-later, noanswer”) in new stack
[2022-05-18 13:01:21] VERBOSE[18271][C-0000206e] file.c: <Local/48XXX164@from-internal-0000006b;2> Playing ‘all-circuits-busy-now.ulaw’ (language ‘pl’)
[2022-05-18 13:01:22] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-trunk:3] Log(“SIP/10.0.20.2-00001f90”, “WARNING,Friendly Scanner from 45.93.16.111”) in new stack
[2022-05-18 13:01:22] WARNING[18273][C-0000206f] Ext. s: Friendly Scanner from 45.93.16.111
[2022-05-18 13:01:22] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-trunk:4] Wait(“SIP/10.0.20.2-00001f90”, “2”) in new stack
[2022-05-18 13:01:24] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-trunk:5] Playback(“SIP/10.0.20.2-00001f90”, “ss-noservice”) in new stack
[2022-05-18 13:01:24] VERBOSE[18273][C-0000206f] file.c: <SIP/10.0.20.2-00001f90> Playing ‘ss-noservice.ulaw’ (language ‘pl’)
[2022-05-18 13:01:24] VERBOSE[18269][C-0000206e] file.c: <Local/48XXX851@from-internal-0000006a;2> Playing ‘please-try-call-later.ulaw’ (language ‘pl’)
[2022-05-18 13:01:24] VERBOSE[18271][C-0000206e] file.c: <Local/48XXX164@from-internal-0000006b;2> Playing ‘please-try-call-later.ulaw’ (language ‘pl’)
[2022-05-18 13:01:25] WARNING[3083] chan_sip.c: Retransmission timeout reached on transmission 1518859356-551503232-1523025292 for seqno 1 (Critical Response) – See SIP Retransmissions - Asterisk Project - Asterisk Project Wiki
Packet timed out after 32000ms with no response
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-outisbusy:5] Congestion(“Local/48XXX851@from-internal-0000006a;2”, “20”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] app_dial.c: Local/48XXX851@from-internal-0000006a;1 is circuit-busy
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] app_dial.c: Everyone is busy/congested at this time (1:0/1/0)
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:23] Set(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “DIALSTATUS=CONGESTION”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:24] GosubIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?CONGESTION,1()”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:25] NoOp(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “Returning since nobody answered”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-dial:26] MacroExit(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Auto fallthrough, channel ‘Local/RG-111*-48XXX851#@from-internal-00000068;2’ status is ‘CONGESTION’
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] app_macro.c: Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘Local/48XXX851@from-internal-0000006a;2’ in macro ‘outisbusy’
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Spawn extension (from-internal, 48XXX851, 13) exited non-zero on ‘Local/48XXX851@from-internal-0000006a;2’
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Executing [h@from-internal:1] Macro(“Local/48XXX851@from-internal-0000006a;2”, “hangupcall”) in new stack
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“Local/48XXX851@from-internal-0000006a;2”, “1?theend”) in new stack
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“Local/48XXX851@from-internal-0000006a;2”, “0?Set(CDR(recordingfile)=)”) in new stack
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“Local/48XXX851@from-internal-0000006a;2”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘Local/48XXX851@from-internal-0000006a;2’ in macro ‘hangupcall’
[2022-05-18 13:01:27] VERBOSE[18269][C-0000206e] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘Local/48XXX851@from-internal-0000006a;2’
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] app_dial.c: Local/RG-111*-48XXX851#@from-internal-00000068;1 is circuit-busy
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [h@from-internal:1] Macro(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “hangupcall”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “1?theend”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-outisbusy:5] Congestion(“Local/48XXX164@from-internal-0000006b;2”, “20”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] app_dial.c: Local/48XXX164@from-internal-0000006b;1 is circuit-busy
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] app_dial.c: Everyone is busy/congested at this time (1:0/1/0)
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] app_macro.c: Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘Local/48XXX164@from-internal-0000006b;2’ in macro ‘outisbusy’
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Spawn extension (from-internal, 48XXX164, 13) exited non-zero on ‘Local/48XXX164@from-internal-0000006b;2’
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Executing [h@from-internal:1] Macro(“Local/48XXX164@from-internal-0000006b;2”, “hangupcall”) in new stack
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“Local/48XXX164@from-internal-0000006b;2”, “1?theend”) in new stack
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:23] Set(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “DIALSTATUS=CONGESTION”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:24] GosubIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?CONGESTION,1()”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:25] NoOp(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “Returning since nobody answered”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-dial:26] MacroExit(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Auto fallthrough, channel ‘Local/RG-111*-48XXX164#@from-internal-00000069;2’ status is ‘CONGESTION’
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] app_dial.c: Local/RG-111*-48XXX164#@from-internal-00000069;1 is circuit-busy
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“Local/48XXX164@from-internal-0000006b;2”, “0?Set(CDR(recordingfile)=)”) in new stack
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “0?Set(CDR(recordingfile)=)”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [h@from-internal:1] Macro(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “hangupcall”) in new stack
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“Local/48XXX164@from-internal-0000006b;2”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘Local/48XXX164@from-internal-0000006b;2’ in macro ‘hangupcall’
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“Local/RG-111*-48XXX851#@from-internal-00000068;2”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18271][C-0000206e] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘Local/48XXX164@from-internal-0000006b;2’
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] app_dial.c: Everyone is busy/congested at this time (2:0/2/0)
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘Local/RG-111*-48XXX851#@from-internal-00000068;2’ in macro ‘hangupcall’
[2022-05-18 13:01:27] VERBOSE[18261][C-0000206e] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘Local/RG-111*-48XXX851#@from-internal-00000068;2’
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:23] Set(“SIP/Out1-00001f8e”, “DIALSTATUS=CONGESTION”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:24] GosubIf(“SIP/Out1-00001f8e”, “0?CONGESTION,1()”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:25] NoOp(“SIP/Out1-00001f8e”, “Returning since nobody answered”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial:26] MacroExit(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “1?theend”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:8] NoOp(“SIP/Out1-00001f8e”, “Deleting: RG/111/SIP/Out1-00001f8e RINGING”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:9] Set(“SIP/Out1-00001f8e”, “USE_CONFIRMATION=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-dial-confirm:10] Set(“SIP/Out1-00001f8e”, “RINGGROUP_INDEX=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:15] Gosub(“SIP/Out1-00001f8e”, “sub-record-cancel,s,1()”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@sub-record-cancel:1] Return(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:16] Set(“SIP/Out1-00001f8e”, “RingGroupMethod=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:17] GotoIf(“SIP/Out1-00001f8e”, “0?nodest”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:18] Set(“SIP/Out1-00001f8e”, “__NODEST=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:19] Macro(“SIP/Out1-00001f8e”, “blkvm-clr,”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-clr:1] Set(“SIP/Out1-00001f8e”, “SHARED(BLKVM,SIP/Out1-00001f8e)=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-clr:2] Set(“SIP/Out1-00001f8e”, “GOSUB_RETVAL=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@macro-blkvm-clr:3] MacroExit(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [111@ext-group:20] Goto(“SIP/Out1-00001f8e”, “ivr-1,s,1”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx_builtins.c: Goto (ivr-1,s,1)
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:1] Set(“SIP/Out1-00001f8e”, “TIMEOUT_LOOPCOUNT=0”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:2] Set(“SIP/Out1-00001f8e”, “INVALID_LOOPCOUNT=0”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:3] Set(“SIP/Out1-00001f8e”, “_IVR_CONTEXT_ivr-1=”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:4] Set(“SIP/Out1-00001f8e”, “_IVR_CONTEXT=ivr-1”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:5] Set(“SIP/Out1-00001f8e”, "_IVR_RETVM=") in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:6] GotoIf(“SIP/Out1-00001f8e”, “0?skip”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:7] Answer(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:8] Wait(“SIP/Out1-00001f8e”, “1”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “0?Set(CDR(recordingfile)=)”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“Local/RG-111*-48XXX164#@from-internal-00000069;2”, “”) in new stack
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘Local/RG-111*-48XXX164#@from-internal-00000069;2’ in macro ‘hangupcall’
[2022-05-18 13:01:27] VERBOSE[18262][C-0000206e] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘Local/RG-111*-48XXX164#@from-internal-00000069;2’
[2022-05-18 13:01:28] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:9] Set(“SIP/Out1-00001f8e”, "IVR_MSG=custom/Zebrahead-Hell_Yeah") in new stack
[2022-05-18 13:01:28] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:10] Set(“SIP/Out1-00001f8e”, “TIMEOUT(digit)=3”) in new stack
[2022-05-18 13:01:28] VERBOSE[18253][C-0000206e] func_timeout.c: Digit timeout set to 3.000
[2022-05-18 13:01:28] VERBOSE[18253][C-0000206e] pbx.c: Executing [s@ivr-1:11] ExecIf(“SIP/Out1-00001f8e”, "1?Background(custom/Zebrahead-Hell_Yeah)") in new stack
[2022-05-18 13:01:28] VERBOSE[18253][C-0000206e] file.c: <SIP/Out1-00001f8e> Playing 'custom/Zebrahead-_Hell_Yeah.slin’ (language ‘pl’)
[2022-05-18 13:01:29] VERBOSE[18253][C-0000206e] pbx.c: Spawn extension (ivr-1, s, 11) exited non-zero on ‘SIP/Out1-00001f8e’
[2022-05-18 13:01:29] VERBOSE[18253][C-0000206e] pbx.c: Executing [h@ivr-1:1] Hangup(“SIP/Out1-00001f8e”, “”) in new stack
[2022-05-18 13:01:29] VERBOSE[18253][C-0000206e] pbx.c: Spawn extension (ivr-1, h, 1) exited non-zero on ‘SIP/Out1-00001f8e’
[2022-05-18 13:01:29] VERBOSE[18255][C-0000206e] app_mixmonitor.c: MixMonitor close filestream (mixed)
[2022-05-18 13:01:29] VERBOSE[18255][C-0000206e] app_mixmonitor.c: End MixMonitor Recording SIP/Out1-00001f8e
[2022-05-18 13:01:29] VERBOSE[18273][C-0000206f] pbx.c: Executing [s@from-trunk:6] SayAlpha(“SIP/10.0.20.2-00001f90”, “500441519471676”) in new stack

comtech · May 23, 2022, 2:28pm

https://wiki.freepbx.org/display/FOP/Hangup+Cause+Codes?src=contextnavpagetreemode

Your getting hangup code 1

Check with your carrier to see what they are receiving on their side that is causing them to reject.

rmichalowski · May 25, 2022, 1:10pm

I got this answer from the carrier

These connections have been registered in the signaling monitoring. They look like two redirect attempts, but without a proper "DIVERSION" header indicating that the redirect is in progress (the specification for DIVERSION is in RFC5806). In this case, the [Remote-Party-ID:] header is misinterpreted by our SBC, additionally we see there (example frame below) the number "XXX" that does not exist in the DDI numbering range of your service, that's why our SBC responds to it [SIP / 2.0 604 Does not exist anywhere] and finally there is no redirection.

Do i understand correctly? Should I configure connections in such a way that they go from the range of available numbering?

system · June 25, 2022, 1:10pm

This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.