Freepbx outbound 603 Denied

Hello

I have been trying to configure inbound calls on my system, and it allways gives me 603 denied.

My DDI/DID wich is forwarding the calls to my domain at iptel.org.

Then the trunk is between my pbx and iptel.org

The trunk geisters all fine but when i call my DDI/DID i allways get 603 - Denied error.

Most recent version of freepbx distro, all updates made, only 4 ext, 1 trunk 1 inbound route and 2 cisco 7960 configured on the server.
no nat
server has local ip and phones too
What should i do ?

Here are the configurations of my system

[iptel-inbound]
type=friend
secret=xxxxx
username=limite100
host=iptel.org
disallow=all
allow=ulaw
fromuser=limite100
fromdomain=iptel.org
canreinvite=no
insecure=invite,port
qualify=yes
nat=no
context=from-trunk

some logs

Some debug right after a failed call

> doing dnsmgr_lookup for ‘iptel.org
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [[email protected]:1] AGI(“SIP/iptelinbound-00000011”, “ipbx/incoming.ipbx”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/ipbx/incoming.ipbx
> doing dnsmgr_lookup for ‘iptel.org
> ipbx/incoming.ipbx: no incoming routing table entry for extension (s)
– <SIP/iptelinbound-00000011>AGI Script ipbx/incoming.ipbx completed, returning 4
== Spawn extension (incoming, s, 1) exited non-zero on ‘SIP/iptelinbound-00000011’
– Executing [[email protected]:1] Hangup(“SIP/iptelinbound-00000011”, “”) in new stack
== Spawn extension (incoming, h, 1) exited non-zero on ‘SIP/iptelinbound-00000011’
[May 14 17:55:32] NOTICE[2809]: chan_sip.c:26387 sip_poke_noanswer: Peer ‘iptelinbound’ is now UNREACHABLE! Last qualify: 71
ipbx*CLI>