Hi,
I am very newbie with FreePBX and Asterisk so if my question is trivial, I’m sorry.
I created two extensions, 58444 and 101. I tested them and they are able to call each other.
If from my Asterisk CLI I type:
Beestrix*CLI> sip show peers
Name/username Host Dyn Forcerport ACL Port Status
101/101 143.215.204.123 D N A 5061 OK (2 ms)
58444/58444 143.215.206.163 D 5060 OK (5 ms)
HoneyTrunk 143.215.252.117 A 5060 Unmonitored
3 sip peers [Monitored: 2 online, 0 offline Unmonitored: 1 online, 0 offline]
…as you can see, the extensions are registered.
The strange thing is that, if from FreePBX I go to Asterisk Info -> Sip Info this is what I see:
Name/username Host Dyn Forcerport ACL Port Status
101 (Unspecified) D A 0 UNKNOWN
58444 (Unspecified) D 0 UNKNOWN
HoneyTrunk 143.215.252.117 A 5060 Unmonitored
3 sip peers [Monitored: 0 online, 2 offline Unmonitored: 1 online, 0 offline]
At the very same time! I know the extensions are registered!! Also, Refresh doesn’t change anything and if I write the command in “Asterisk CLI” page from FreePBX it still doesn’t show anything!
How can that be? Is it possible that my FreePBX is not properly monitoring my Asterisk?
Should I be worried?
Thank you
Bye