FPBX17 and I are in a toxic relationship

Or maybe its Nextiva, goodness I dislike Nextiva.
PBX16CHAN ran just fine for a while, however, last year we started having small glitches where calls could not be made or received. I thought that maybe this was a device issue and built PBX17PJ on a new computer and tested it.
it has been nothing but a fight. between getting the phones to connect (TLS issue) to getting the Nextiva sip connection to send to the correct inbound route. (had to skip over context DID and use Contact User, fromheader didnt work)
I finally get it to function for the most part. and.
original plus issues persist.
I have googled my fingers to death. so turn now to a new post and hope.
Issues i cant figure out.
1: Calls only last 15min, then disconnect. i have tried to turn off reinvite, and extend the session time. hasnt worked. we didnt have this issue on PXB16CHAN, is there a new network setting im missing or is my connection to nextiva wrong. before you ask. yes i called them. they can only tell me my username and password. nothing else.

2: Calls will just stop working. it will last a few minuets and then suddenly they are back on. the woman says “All circuits are busy right now” and refuses the call out.

any advice? Thank you.

I believe I found a solution to issue 1 Disable reinvite on PJSIP trunk? Is this possible thru gui?
when i reviewed the CHAN settings for the trunk it shows session-timers=refuse, this was a setting directed by Nextiva in their CHAN settings. https://www.nextiva.com/wp-content/uploads/legacy/downloads/guides/SIP-Trunking/NextOS-SIP-Trunking-FreePBX-Setup-Guide-v1.0.pdf
To get this effect, I added the code listed in my first link.
Now if i can figure out why things just disconnect…

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.