I have some extensions that have Find me/Follow me enabled with ring strategy of ringallv2-prim only ring twice on the first extension then directly to voicemail, then 2nd line listed in the Follow-me List never rings. To fix this I set the Ring Strategy to Ringall, Submit, then change it back to ringallv2-prim, Submit. Then the extension will ring as desire. The called extension ring for 7 seconds, then the main extension and 2nd extension will ring for 20 before going to VM. Here is the logs below for it only ringing twice then VM, I am calling from 6200 to 4313. I have a fix for this but would like to know how to identify which extensions are having this issue so I could fix it before I get the complaints.
Other extensions with the above setting are working as expected without the change.
I’m on Freepbx version 15.0.16.75.1 and Asterisk Version: 16.9.0
Thanks in advance.
== Using SIP RTP Audio TOS bits 184
== Using SIP RTP Audio TOS bits 184 in TCLASS field.
== Using SIP RTP Audio CoS mark 5
– Executing [[email protected]:1] GotoIf(“PJSIP/6200-000054e4”, “0?ext-local,4313,1:followme-check,4313,1”) in new stack
– Goto (followme-check,4313,1)
– Executing [[email protected]:1] Gosub(“PJSIP/6200-000054e4”, “followme-sub,4313,1()”) in new stack
– Executing [[email protected]:1] GotoIf(“PJSIP/6200-000054e4”, “0?skipclid”) in new stack
– Executing [[email protected]:2] Macro(“PJSIP/6200-000054e4”, “user-callerid,”) in new stack
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “TOUCH_MONITOR=1603051241.159949”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “AMPUSER=6200”) in new stack
– Executing [[email protected]:3] Set(“PJSIP/6200-000054e4”, “HOTDESCKCHAN=6200-000054e4”) in new stack
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “HOTDESKEXTEN=6200”) in new stack
– Executing [[email protected]:5] Set(“PJSIP/6200-000054e4”, “HOTDESKCALL=0”) in new stack
– Executing [[email protected]:6] ExecIf(“PJSIP/6200-000054e4”, “0?Set(HOTDESKCALL=1)”) in new stack
– Executing [[email protected]:7] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CALLERID(name)=)”) in new stack
– Executing [[email protected]:8] GotoIf(“PJSIP/6200-000054e4”, “0?report”) in new stack
– Executing [[email protected]:9] ExecIf(“PJSIP/6200-000054e4”, “1?Set(REALCALLERIDNUM=6200)”) in new stack
– Executing [[email protected]:10] Set(“PJSIP/6200-000054e4”, “AMPUSER=6200”) in new stack
– Executing [[email protected]:11] GotoIf(“PJSIP/6200-000054e4”, “0?limit”) in new stack
– Executing [[email protected]:12] Set(“PJSIP/6200-000054e4”, “AMPUSERCIDNAME=Long Vo”) in new stack
– Executing [[email protected]:13] ExecIf(“PJSIP/6200-000054e4”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
– Executing [[email protected]:14] GotoIf(“PJSIP/6200-000054e4”, “0?report”) in new stack
– Executing [[email protected]:15] Set(“PJSIP/6200-000054e4”, “AMPUSERCID=6200”) in new stack
– Executing [[email protected]:16] Set(“PJSIP/6200-000054e4”, “__DIAL_OPTIONS=HhTtr”) in new stack
– Executing [[email protected]:17] Set(“PJSIP/6200-000054e4”, “CALLERID(all)=“Long Vo” <6200>”) in new stack
– Executing [[email protected]:18] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CUSDIAL=)”) in new stack
– Executing [[email protected]:19] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CALLERID(all)=“Long Vo” <6200>)”) in new stack
– Executing [[email protected]:20] GotoIf(“PJSIP/6200-000054e4”, “0?limit”) in new stack
– Executing [[email protected]:21] ExecIf(“PJSIP/6200-000054e4”, “0?Set(GROUP(concurrency_limit)=6200)”) in new stack
– Executing [[email protected]:22] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [[email protected]:23] NoOp(“PJSIP/6200-000054e4”, “Macro Depth is 1”) in new stack
– Executing [[email protected]:24] GotoIf(“PJSIP/6200-000054e4”, “1?report2:macroerror”) in new stack
– Goto (macro-user-callerid,s,25)
– Executing [[email protected]:25] GotoIf(“PJSIP/6200-000054e4”, “0?continue”) in new stack
– Executing [[email protected]:26] ExecIf(“PJSIP/6200-000054e4”, “1?Set(__CALLEE_ACCOUNCODE=JEFF-Main Office - Principal)”) in new stack
– Executing [[email protected]:27] Set(“PJSIP/6200-000054e4”, “__TTL=64”) in new stack
– Executing [[email protected]:28] GotoIf(“PJSIP/6200-000054e4”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,44)
– Executing [[email protected]:44] Set(“PJSIP/6200-000054e4”, “CALLERID(number)=6200”) in new stack
– Executing [[email protected]:45] Set(“PJSIP/6200-000054e4”, “CALLERID(name)=Long Vo”) in new stack
– Executing [[email protected]:46] GotoIf(“PJSIP/6200-000054e4”, “0?cnum”) in new stack
– Executing [[email protected]:47] Set(“PJSIP/6200-000054e4”, “CDR(cnam)=Long Vo”) in new stack
– Executing [[email protected]:48] Set(“PJSIP/6200-000054e4”, “CDR(cnum)=6200”) in new stack
– Executing [[email protected]:49] Set(“PJSIP/6200-000054e4”, “CHANNEL(language)=en”) in new stack
– Executing [[email protected]:3] Set(“PJSIP/6200-000054e4”, “DIAL_OPTIONS=HhTtrI”) in new stack
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “CONNECTEDLINE(num,i)=4313”) in new stack
– Executing [[email protected]:5] Gosub(“PJSIP/6200-000054e4”, “sub-presencestate-display,s,1(4313)”) in new stack
– Executing [[email protected]:1] Goto(“PJSIP/6200-000054e4”, “state-available,1”) in new stack
– Goto (sub-presencestate-display,state-available,1)
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “PRESENCESTATE_DISPLAY=(Available)”) in new stack
– Executing [[email protected]:2] Return(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:6] Set(“PJSIP/6200-000054e4”, “CONNECTEDLINE(name)=Judith Alcala(Available)”) in new stack
– Executing [[email protected]:7] Set(“PJSIP/6200-000054e4”, “FM_DIALSTATUS=NOT_INUSE”) in new stack
– Executing [[email protected]:8] Set(“PJSIP/6200-000054e4”, “__EXTTOCALL=4313”) in new stack
– Executing [[email protected]:9] Set(“PJSIP/6200-000054e4”, “__PICKUPMARK=4313”) in new stack
– Executing [[email protected]:10] Macro(“PJSIP/6200-000054e4”, “blkvm-setifempty,”) in new stack
– Executing [[email protected]:1] GotoIf(“PJSIP/6200-000054e4”, “1?init”) in new stack
– Goto (macro-blkvm-setifempty,s,4)
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “__BLKVM_CHANNEL=PJSIP/6200-000054e4”) in new stack
– Executing [[email protected]:5] Set(“PJSIP/6200-000054e4”, “SHARED(BLKVM,PJSIP/6200-000054e4)=TRUE”) in new stack
– Executing [[email protected]:6] Set(“PJSIP/6200-000054e4”, “GOSUB_RETVAL=TRUE”) in new stack
– Executing [[email protected]:7] MacroExit(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:11] GotoIf(“PJSIP/6200-000054e4”, “1?skipov”) in new stack
– Goto (followme-sub,4313,14)
– Executing [[email protected]:14] Set(“PJSIP/6200-000054e4”, “RRNODEST=”) in new stack
– Executing [[email protected]:15] Set(“PJSIP/6200-000054e4”, “__NODEST=4313”) in new stack
– Executing [[email protected]:16] GosubIf(“PJSIP/6200-000054e4”, “0?sub-fmsetcid,s,1()”) in new stack
– Executing [[email protected]:17] GotoIf(“PJSIP/6200-000054e4”, “1?skipprepend”) in new stack
– Goto (followme-sub,4313,19)
– Executing [[email protected]:19] Set(“PJSIP/6200-000054e4”, “RecordMethod=Group”) in new stack
– Executing [[email protected]:20] Gosub(“PJSIP/6200-000054e4”, “sub-record-check,s,1(exten,4313,)”) in new stack
– Executing [[email protected]:1] GotoIf(“PJSIP/6200-000054e4”, “0?initialized”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [[email protected]:3] Set(“PJSIP/6200-000054e4”, “NOW=1603051241”) in new stack
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “__DAY=18”) in new stack
– Executing [[email protected]:5] Set(“PJSIP/6200-000054e4”, “__MONTH=10”) in new stack
– Executing [[email protected]:6] Set(“PJSIP/6200-000054e4”, “__YEAR=2020”) in new stack
– Executing [[email protected]:7] Set(“PJSIP/6200-000054e4”, “__TIMESTR=20201018-130041”) in new stack
– Executing [[email protected]:8] Set(“PJSIP/6200-000054e4”, “__FROMEXTEN=6200”) in new stack
– Executing [[email protected]:9] Set(“PJSIP/6200-000054e4”, “__MON_FMT=wav”) in new stack
– Executing [[email protected]:10] NoOp(“PJSIP/6200-000054e4”, “Recordings initialized”) in new stack
– Executing [[email protected]:11] ExecIf(“PJSIP/6200-000054e4”, “1?Set(ARG3=dontcare)”) in new stack
– Executing [[email protected]:12] Set(“PJSIP/6200-000054e4”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [[email protected]:13] ExecIf(“PJSIP/6200-000054e4”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [[email protected]:14] GotoIf(“PJSIP/6200-000054e4”, “5?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [[email protected]:17] GotoIf(“PJSIP/6200-000054e4”, “1?sub-record-check,exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [[email protected]:1] NoOp(“PJSIP/6200-000054e4”, “Exten Recording Check between 6200 and 4313”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “CALLTYPE=internal”) in new stack
– Executing [[email protected]:3] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CALLTYPE=)”) in new stack
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “CALLEE=dontcare”) in new stack
– Executing [[email protected]:5] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CALLEE=dontcare)”) in new stack
– Executing [[email protected]:6] GotoIf(“PJSIP/6200-000054e4”, “0?callee”) in new stack
– Executing [[email protected]:7] GotoIf(“PJSIP/6200-000054e4”, “1?caller”) in new stack
– Goto (sub-record-check,exten,13)
– Executing [[email protected]:13] Set(“PJSIP/6200-000054e4”, “RECMODE=dontcare”) in new stack
– Executing [[email protected]:14] ExecIf(“PJSIP/6200-000054e4”, “0?Set(RECMODE=dontcare)”) in new stack
– Executing [[email protected]:15] ExecIf(“PJSIP/6200-000054e4”, “1?Set(RECMODE=dontcare)”) in new stack
– Executing [[email protected]:16] Gosub(“PJSIP/6200-000054e4”, “recordcheck,1(dontcare,internal,4313)”) in new stack
– Executing [[email protected]:1] NoOp(“PJSIP/6200-000054e4”, “Starting recording check against dontcare”) in new stack
– Executing [[email protected]:2] Goto(“PJSIP/6200-000054e4”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [[email protected]:3] Return(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:17] Return(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:21] GotoIf(“PJSIP/6200-000054e4”, “1?skipdring”) in new stack
– Goto (followme-sub,4313,24)
– Executing [[email protected]:24] Set(“PJSIP/6200-000054e4”, “STRATEGY=ringallv2-prim”) in new stack
– Executing [[email protected]:25] Set(“PJSIP/6200-000054e4”, “__RVOL=”) in new stack
– Executing [[email protected]:26] GotoIf(“PJSIP/6200-000054e4”, “1?skipsimple”) in new stack
– Goto (followme-sub,4313,29)
– Executing [[email protected]:29] Set(“PJSIP/6200-000054e4”, “RingGroupMethod=ringallv2-prim”) in new stack
– Executing [[email protected]:30] Set(“PJSIP/6200-000054e4”, “_FMGRP=4313”) in new stack
– Executing [[email protected]:31] GotoIf(“PJSIP/6200-000054e4”, “1?DIALGRP”) in new stack
– Goto (followme-sub,4313,35)
– Executing [[email protected]:35] ExecIf(“PJSIP/6200-000054e4”, “1?Set(DOPTS=HhTtrI):Set(DOPTS=m(Ring)HhTtI)”) in new stack
– Executing [[email protected]:36] Set(“PJSIP/6200-000054e4”, “__ALT_CONFIRM_MSG=”) in new stack
– Executing [[email protected]:37] GotoIf(“PJSIP/6200-000054e4”, “0?doconfirm”) in new stack
– Executing [[email protected]:38] GotoIf(“PJSIP/6200-000054e4”, “1?ringallv21”) in new stack
– Goto (followme-sub,4313,41)
– Executing [[email protected]:41] Macro(“PJSIP/6200-000054e4”, “dial,27,HhTtrI,”) in new stack
– Executing [[email protected]:1] NoOp(“PJSIP/6200-000054e4”, "Blind Transfer: , Attended Transfer: , User: 6200, Alert Info: ") in new stack
– Executing [[email protected]:2] ExecIf(“PJSIP/6200-000054e4”, “1?Set(ALERT_INFO=)”) in new stack
– Executing [[email protected]:3] ExecIf(“PJSIP/6200-000054e4”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [[email protected]:4] ExecIf(“PJSIP/6200-000054e4”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [[email protected]:5] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [[email protected]:6] AGI(“PJSIP/6200-000054e4”, “agi://127.0.0.1/dialparties.agi”) in new stack
agi://127.0.0.1/dialparties.agi: Starting New Dialparties.agi
agi://127.0.0.1/dialparties.agi: Caller ID name is ‘Long Vo’ number is ‘6200’
agi://127.0.0.1/dialparties.agi: CW Ignore is:
agi://127.0.0.1/dialparties.agi: CF Ignore is:
agi://127.0.0.1/dialparties.agi: CW IN_USE/BUSY is: 1
agi://127.0.0.1/dialparties.agi: Methodology of ring is ‘ringallv2-prim’
– agi://127.0.0.1/dialparties.agi: Extension 4313 cf is disabled
– agi://127.0.0.1/dialparties.agi: Extension 4313 do not disturb is disabled
agi://127.0.0.1/dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
agi://127.0.0.1/dialparties.agi: Extension 4313 has ExtensionState: 0
== agi://127.0.0.1/dialparties.agi: Discovered PJSIP Endpoint PJSIP/4313
– agi://127.0.0.1/dialparties.agi: Ended up with real PJSIP Dial string PJSIP/4313/sip:[email protected]:17610
– agi://127.0.0.1/dialparties.agi: dbset CALLTRACE/4313 to 6200
– agi://127.0.0.1/dialparties.agi: Filtered ARG3: 4313
– agi://127.0.0.1/dialparties.agi: RING ALL V2 :
agi://127.0.0.1/dialparties.agi: RVOL_MODE ‘’
agi://127.0.0.1/dialparties.agi: RVOL is:
agi://127.0.0.1/dialparties.agi: RVOLPARENT is:
– <PJSIP/6200-000054e4>AGI Script agi://127.0.0.1/dialparties.agi completed, returning 0
– Executing [[email protected]:7] GotoIf(“PJSIP/6200-000054e4”, “1?normdial”) in new stack
– Goto (macro-dial,s,10)
– Executing [[email protected]:10] NoOp(“PJSIP/6200-000054e4”, “Returned from dialparties with groups to dial”) in new stack
– Executing [[email protected]:11] NoOp(“PJSIP/6200-000054e4”, "ringall array ") in new stack
– Executing [[email protected]:12] Set(“PJSIP/6200-000054e4”, “__FMGL_DIAL=”) in new stack
– Executing [[email protected]:13] Set(“PJSIP/6200-000054e4”, “LOOPCNT=1”) in new stack
– Executing [[email protected]:14] Set(“PJSIP/6200-000054e4”, “ITER=1”) in new stack
– Executing [[email protected]:15] Set(“PJSIP/6200-000054e4”, “__EXTTOCALL=4313”) in new stack
– Executing [[email protected]:16] NoOp(“PJSIP/6200-000054e4”, “Working with 4313”) in new stack
– Executing [[email protected]:17] ExecIf(“PJSIP/6200-000054e4”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
– Executing [[email protected]:18] ExecIf(“PJSIP/6200-000054e4”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
– Executing [[email protected]:19] Set(“PJSIP/6200-000054e4”, “ITER=2”) in new stack
– Executing [[email protected]:20] GotoIf(“PJSIP/6200-000054e4”, “0?ndloopbegin”) in new stack
– Executing [[email protected]:21] Macro(“PJSIP/6200-000054e4”, “dial-ringall-predial-hook,”) in new stack
– Executing [[email protected]:1] MacroExit(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:22] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CWRING=r(callwaiting)):Set(CWRING=)”) in new stack
– Executing [[email protected]:23] ExecIf(“PJSIP/6200-000054e4”, “0?Set(ds=PJSIP/4313/sip:[email protected]:17610&SIP/994313,7,HhTtrIM(auto-blkvm)g)”) in new stack
– Executing [[email protected]:24] Dial(“PJSIP/6200-000054e4”, “PJSIP/4313/sip:[email protected]:17610&SIP/994313,7,HhTtrIM(auto-blkvm)b(func-apply-sipheaders^s^1),”) in new stack
[2020-10-18 13:00:41] WARNING[30925][C-00002b3b]: app_dial.c:2576 dial_exec_full: Unable to create channel of type ‘SIP’ (cause 20 - Subscriber absent)
– PJSIP/4313-000054e5 Internal Gosub(func-apply-sipheaders,s,1) start
– Executing [[email protected]:1] NoOp(“PJSIP/4313-000054e5”, “Applying SIP Headers to channel PJSIP/4313-000054e5”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/4313-000054e5”, “TECH=PJSIP”) in new stack
– Executing [[email protected]:3] Set(“PJSIP/4313-000054e5”, “SIPHEADERKEYS=”) in new stack
– Executing [[email protected]:4] While(“PJSIP/4313-000054e5”, “0”) in new stack
– Jumping to priority 12
– Executing [[email protected]:13] Return(“PJSIP/4313-000054e5”, “”) in new stack
== Spawn extension (from-internal, 4313, 1) exited non-zero on ‘PJSIP/4313-000054e5’
– PJSIP/4313-000054e5 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
– Called PJSIP/4313/sip:[email protected]:17610
== Using SIP RTP Audio TOS bits 184
== Using SIP RTP Audio TOS bits 184 in TCLASS field.
== Using SIP RTP Audio CoS mark 5
– Connected line update to PJSIP/6200-000054e4 prevented.
– PJSIP/4313-000054e5 is ringing
– PJSIP/4313-000054e5 is ringing
– Nobody picked up in 7000 ms
– Executing [[email protected]:25] Set(“PJSIP/6200-000054e4”, “DIALSTATUS=NOANSWER”) in new stack
– Executing [[email protected]:26] GosubIf(“PJSIP/6200-000054e4”, “0?NOANSWER,1()”) in new stack
– Executing [[email protected]:27] NoOp(“PJSIP/6200-000054e4”, “Returning since nobody answered”) in new stack
– Executing [[email protected]:28] MacroExit(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:42] Goto(“PJSIP/6200-000054e4”, “nextstep”) in new stack
– Goto (followme-sub,4313,47)
– Executing [[email protected]:47] Set(“PJSIP/6200-000054e4”, “RingGroupMethod=”) in new stack
– Executing [[email protected]:48] GotoIf(“PJSIP/6200-000054e4”, “0?nodest”) in new stack
– Executing [[email protected]:49] Set(“PJSIP/6200-000054e4”, “__NODEST=”) in new stack
– Executing [[email protected]:50] Set(“PJSIP/6200-000054e4”, “__PICKUPMARK=”) in new stack
– Executing [[email protected]:51] Macro(“PJSIP/6200-000054e4”, “blkvm-clr,”) in new stack
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “SHARED(BLKVM,PJSIP/6200-000054e4)=”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “GOSUB_RETVAL=”) in new stack
– Executing [[email protected]:3] MacroExit(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:52] Set(“PJSIP/6200-000054e4”, “DIALSTATUS=NOANSWER”) in new stack
– Executing [[email protected]:53] GotoIf(“PJSIP/6200-000054e4”, “0?dohangup”) in new stack
– Executing [[email protected]:54] Goto(“PJSIP/6200-000054e4”, “ext-local,4313,dest”) in new stack
– Goto (ext-local,4313,4)
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “__PICKUPMARK=”) in new stack
– Executing [[email protected]:5] Macro(“PJSIP/6200-000054e4”, “vm,4313,NOANSWER,”) in new stack
– Executing [[email protected]:1] Macro(“PJSIP/6200-000054e4”, “user-callerid,SKIPTTL”) in new stack
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “TOUCH_MONITOR=1603051241.159949”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “AMPUSER=6200”) in new stack
– Executing [[email protected]:3] Set(“PJSIP/6200-000054e4”, “HOTDESCKCHAN=6200-000054e4”) in new stack
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “HOTDESKEXTEN=6200”) in new stack
– Executing [[email protected]:5] Set(“PJSIP/6200-000054e4”, “HOTDESKCALL=0”) in new stack
– Executing [[email protected]:6] ExecIf(“PJSIP/6200-000054e4”, “0?Set(HOTDESKCALL=1)”) in new stack
– Executing [[email protected]:7] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CALLERID(name)=)”) in new stack
– Executing [[email protected]:8] GotoIf(“PJSIP/6200-000054e4”, “7?report”) in new stack
– Goto (macro-user-callerid,s,23)
– Executing [[email protected]:23] NoOp(“PJSIP/6200-000054e4”, “Macro Depth is 2”) in new stack
– Executing [[email protected]:24] GotoIf(“PJSIP/6200-000054e4”, “1?report2:macroerror”) in new stack
– Goto (macro-user-callerid,s,25)
– Executing [[email protected]:25] GotoIf(“PJSIP/6200-000054e4”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,44)
– Executing [[email protected]:44] Set(“PJSIP/6200-000054e4”, “CALLERID(number)=6200”) in new stack
– Executing [[email protected]:45] Set(“PJSIP/6200-000054e4”, “CALLERID(name)=Long Vo”) in new stack
– Executing [[email protected]:46] GotoIf(“PJSIP/6200-000054e4”, “0?cnum”) in new stack
– Executing [[email protected]:47] Set(“PJSIP/6200-000054e4”, “CDR(cnam)=Long Vo”) in new stack
– Executing [[email protected]:48] Set(“PJSIP/6200-000054e4”, “CDR(cnum)=6200”) in new stack
– Executing [[email protected]:49] Set(“PJSIP/6200-000054e4”, “CHANNEL(language)=en”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “VMGAIN=”) in new stack
– Executing [[email protected]:3] Macro(“PJSIP/6200-000054e4”, “blkvm-check,”) in new stack
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “GOSUB_RETVAL=”) in new stack
– Executing [[email protected]:2] ExecIf(“PJSIP/6200-000054e4”, “0?Set(GOSUB_RETVAL=TRUE)”) in new stack
– Executing [[email protected]:3] MacroExit(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:4] GotoIf(“PJSIP/6200-000054e4”, “1?vmx,1”) in new stack
– Goto (macro-vm,vmx,1)
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “MEXTEN=4313”) in new stack
– Executing [[email protected]:2] Set(“PJSIP/6200-000054e4”, “MMODE=NOANSWER”) in new stack
– Executing [[email protected]:3] Set(“PJSIP/6200-000054e4”, “RETVM=”) in new stack
– Executing [[email protected]:4] Set(“PJSIP/6200-000054e4”, “MODE=unavail”) in new stack
– Executing [[email protected]:5] Macro(“PJSIP/6200-000054e4”, “get-vmcontext,4313”) in new stack
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “VMCONTEXT=default”) in new stack
– Executing [[email protected]:2] GotoIf(“PJSIP/6200-000054e4”, “0?200:300”) in new stack
– Goto (macro-get-vmcontext,s,300)
– Executing [[email protected]:300] NoOp(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:6] Set(“PJSIP/6200-000054e4”, “MODE=unavail”) in new stack
– Executing [[email protected]:7] NoOp(“PJSIP/6200-000054e4”, “MODE IS: unavail”) in new stack
– Executing [[email protected]:8] GotoIf(“PJSIP/6200-000054e4”, “1?chknomsg”) in new stack
– Goto (macro-vm,vmx,10)
– Executing [[email protected]:10] GotoIf(“PJSIP/6200-000054e4”, “0?s-NOANSWER,1”) in new stack
– Executing [[email protected]:11] GotoIf(“PJSIP/6200-000054e4”, “1?notdirect”) in new stack
– Goto (macro-vm,vmx,13)
– Executing [[email protected]:13] NoOp(“PJSIP/6200-000054e4”, “Checking if ext 4313 is enabled: blocked”) in new stack
– Executing [[email protected]:14] GotoIf(“PJSIP/6200-000054e4”, “1?s-NOANSWER,1”) in new stack
– Goto (macro-vm,s-NOANSWER,1)
– Executing [[email protected]:1] Macro(“PJSIP/6200-000054e4”, “get-vmcontext,4313”) in new stack
– Executing [[email protected]:1] Set(“PJSIP/6200-000054e4”, “VMCONTEXT=default”) in new stack
– Executing [[email protected]:2] GotoIf(“PJSIP/6200-000054e4”, “0?200:300”) in new stack
– Goto (macro-get-vmcontext,s,300)
– Executing [[email protected]:300] NoOp(“PJSIP/6200-000054e4”, “”) in new stack
– Executing [[email protected]:2] VoiceMail(“PJSIP/6200-000054e4”, “[email protected],u”) in new stack
– <PJSIP/6200-000054e4> Playing ‘/var/spool/asterisk/voicemail/default/4313/unavail.slin’ (language ‘en’)
== Spawn extension (macro-vm, s-NOANSWER, 2) exited non-zero on ‘PJSIP/6200-000054e4’ in macro ‘vm’
== Spawn extension (ext-local, 4313, 5) exited non-zero on ‘PJSIP/6200-000054e4’
– Executing [[email protected]:1] Macro(“PJSIP/6200-000054e4”, “hangupcall,”) in new stack
– Executing [[email protected]:1] GotoIf(“PJSIP/6200-000054e4”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [[email protected]:3] ExecIf(“PJSIP/6200-000054e4”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [[email protected]:4] NoOp(“PJSIP/6200-000054e4”, " montior file= ") in new stack
– Executing [[email protected]:5] GotoIf(“PJSIP/6200-000054e4”, “1?skipagi”) in new stack
– Goto (macro-hangupcall,s,7)
– Executing [[email protected]:7] Hangup(“PJSIP/6200-000054e4”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 7) exited non-zero on ‘PJSIP/6200-000054e4’ in macro ‘hangupcall’
== Spawn extension (ext-local, h, 1) exited non-zero on ‘PJSIP/6200-000054e4’
freepbx*CLI>