FreePBX | Register | Issues | Wiki | Portal | Support

Firmware upgrade yealink


(D Dussault) #1

I’m trying to update the firmware for my Yealink phones and it seems I am doing something wrong but can’t figure out what.

Added the 0.00 firmware to slot 2
I downloaded the latest firmware files that I need for my types of phones (t40 and t42s) in the slot 2
Renamed the file to match the ones in slot 1
Made sure asterisk was the owner of the files
Change in my Yealink template to use Firmware Slot 2

Told the system to update phone, still running old version
What am I missing to get the phones updated ?


(Dave Burgess) #2

Does this sound familiar?


(Tom Ray) #3

So you downloaded the .84 firmware? Did you configure the phones to point their provisioning URLs at the PBX and use the proper method (tftp, http, etc)?


(D Dussault) #4

The provisioning URL points to the PBX and the provisioning is set to http on FreePBX
Seems only the firmware update doesn’t want to work, when I make modifications to the system everything is done right away on the phones.

Not the end of the world, I thought I had a version that was way much older and was trying a feature that is not working in the template but could be me doing something wrong on that side


(Tom Ray) #5

You can do:

grep <mac of phone> /var/log/httpd/access_log to see if the phone made attempts and the PBX got them. Try both upper and lower case versions for the letters in the MAC.


(Avayax) #6

Did you name them t42s.rom and t40.rom?


(system) closed #7

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.