I got this error after run the update.
Unable to locate the FreePBX BMO Class 'Core’A required module might be disabled or uninstalled. Recommended steps (run from the CLI): 1) fwconsole ma install core 2) fwconsole ma enable core
Hi
Pls check from CLI (SSH) your module list. Command is.
fwconsole ma list
You should see all modules are ENABLED if you have Disabled module you can try to enable 1st.
But pls send us 1st fwconsole ma list printout.
Thanks.
Shahin
Hello @shahin ,
here are the list using fwconsole ma list printout
In Self_Helper.class.php line 212:
Unable to locate the FreePBX BMO Class 'Core’A required module might be disabled or uninstalled. Recommended steps (run from the CLI): 1) fwconsole ma install cor
e 2) fwconsole ma enable core
motd []…
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# fwconsole ma list printout
No repos specified, using: [standard] from last GUI settings
±--------------------±-----------±----------------------------------------±------------±----------+
| Module | Version | Status | License | Signature |
±--------------------±-----------±----------------------------------------±------------±----------+
| accountcodepreserve | 16.0.0.1 | Enabled | GPLv2 | Sangoma |
| adv_recovery | 16.0.43.6 | Enabled | Commercial | Sangoma |
| allowlist | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| amd | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| announcement | 16.0.6 | Enabled | GPLv3+ | Sangoma |
| api | 16.0.11 | Enabled | AGPLv3+ | Sangoma |
| areminder | 16.0.16 | Enabled | Commercial | Sangoma |
| arimanager | 16.0.12 | Enabled | GPLv3+ | Sangoma |
| asterisk-cli | 16.0.8 | Enabled | GPLv3+ | Sangoma |
| asteriskinfo | 16.0.10 | Enabled | GPLv3+ | Sangoma |
| backup | 16.0.66 | Enabled | GPLv3+ | Sangoma |
| blacklist | 16.0.20 | Enabled | GPLv3+ | Sangoma |
| broadcast | 16.0.18 | Enabled | Commercial | Sangoma |
| builtin | | Enabled | | Unsigned |
| bulkhandler | 16.0.16 | Enabled | GPLv3+ | Sangoma |
| calendar | 16.0.21 | Enabled | GPLv3+ | Sangoma |
| callaccounting | 16.0.11 | Enabled | Commercial+ | Sangoma |
| callback | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| callerid | 16.0.5 | Enabled | Commercial | Sangoma |
| callforward | 16.0.5 | Enabled | AGPLv3+ | Sangoma |
| calllimit | 16.0.6 | Enabled | Commercial | Sangoma |
| callrecording | 16.0.20 | Enabled | AGPLv3+ | Sangoma |
| callwaiting | 16.0.5 | Enabled | GPLv3+ | Sangoma |
| cdr | 16.0.32 | Enabled | GPLv3+ | Sangoma |
| cel | 16.0.15 | Enabled | GPLv3+ | Sangoma |
| certman | 16.0.22 | Enabled | AGPLv3+ | Sangoma |
| cidlookup | 16.0.15 | Enabled | GPLv3+ | Sangoma |
| conferences | 16.0.9 | Enabled | GPLv3+ | Sangoma |
| conferencespro | 16.0.9 | Enabled | Commercial | Sangoma |
| configedit | 16.0.5 | Enabled | AGPLv3+ | Sangoma |
| contactmanager | 16.0.22 | Enabled | GPLv3+ | Sangoma |
| core | 16.0.68.4 | Disabled; Pending upgrade to 16.0.68.18 | GPLv3+ | Sangoma |
| cos | 16.0.7 | Enabled | Commercial | Sangoma |
| customappsreg | 16.0.5 | Enabled | GPLv3+ | Sangoma |
| cxpanel | 16.0.2 | Enabled | GPLv3 | Sangoma |
| dahdiconfig | 16.0.8 | Enabled | GPLv3+ | Sangoma |
| dashboard | 16.0.16 | Enabled | AGPLv3+ | Sangoma |
| daynight | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| dictate | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| directory | 16.0.2 | Enabled | GPLv3+ | Sangoma |
| disa | 16.0.4 | Enabled | AGPLv3+ | Sangoma |
| donotdisturb | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| dynroute | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| endpoint | 16.0.77.1 | Disabled; Pending upgrade to 16.0.80.7 | Commercial | Sangoma |
| extensionroutes | 16.0.7 | Enabled | Commercial | Sangoma |
| extensionsettings | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| fax | 16.0.13 | Enabled | GPLv3+ | Sangoma |
| faxpro | 16.0.11 | Enabled | Commercial | Sangoma |
| featurecodeadmin | 16.0.11 | Enabled | GPLv3+ | Sangoma |
| filestore | 16.0.16 | Enabled | AGPLv3 | Sangoma |
| findmefollow | 16.0.19 | Enabled | GPLv3+ | Sangoma |
| firewall | 16.0.57.6 | Enabled | AGPLv3+ | Sangoma |
| framework | 16.0.40.2 | Enabled | GPLv2+ | Sangoma |
| fw_langpacks | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| hotelwakeup | 16.0.8 | Enabled | GPLv2 | Sangoma |
| iaxsettings | 16.0.3 | Enabled | AGPLv3 | Sangoma |
| infoservices | 16.0.2 | Enabled | GPLv2+ | Sangoma |
| iotserver | 16.0.9.3 | Enabled | Commercial | Sangoma |
| irc | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| ivr | 16.0.5 | Enabled | GPLv3+ | Sangoma |
| languages | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| logfiles | 16.0.7 | Enabled | GPLv3+ | Sangoma |
| manager | 16.0.15 | Enabled | GPLv2+ | Sangoma |
| miscapps | 15.0.10 | Enabled | GPLv3+ | Sangoma |
| miscdests | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| missedcall | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| music | 16.0.2 | Enabled | GPLv3+ | Sangoma |
| outroutemsg | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| paging | 16.0.11 | Enabled | GPLv3+ | Sangoma |
| pagingpro | 16.0.10 | Enabled | Commercial | Sangoma |
| parking | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| parkpro | 16.0.5 | Enabled | Commercial | Sangoma |
| pbxmfa | 16.0.9 | Enabled | Commercial+ | Sangoma |
| phonebook | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| phpinfo | 16.0.1 | Enabled | GPLv2+ | Sangoma |
| pinsets | 16.0.8 | Enabled | GPLv3+ | Sangoma |
| pinsetspro | 16.0.4 | Enabled | Commercial | Sangoma |
| pm2 | 16.0.8 | Enabled | AGPLv3+ | Sangoma |
| pms | 16.0.21 | Enabled | Commercial | Sangoma |
| presencestate | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| printextensions | 16.0.8 | Enabled | GPLv3+ | Sangoma |
| queueprio | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| queues | 16.0.20 | Enabled | GPLv2+ | Sangoma |
| queuestats | 16.0.22 | Enabled | Commercial | Sangoma |
| qxact_reports | 16.0.27 | Enabled | Commercial | Sangoma |
| recording_report | 16.0.27 | Enabled | Commercial | Sangoma |
| recordings | 16.0.13 | Enabled | GPLv3+ | Sangoma |
| restapps | 16.0.33 | Enabled | Commercial | Sangoma |
| ringgroups | 16.0.11 | Enabled | GPLv3+ | Sangoma |
| sangomaconnect | 16.0.44.10 | Enabled | Commercial | Sangoma |
| sangomacrm | 16.0.10.19 | Enabled | Commercial | Sangoma |
| sangomartapi | 16.0.44.1 | Enabled | Commercial | Sangoma |
| setcid | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| sipsettings | 16.0.26 | Enabled | AGPLv3+ | Sangoma |
| sipstation | 16.0.22 | Enabled | Commercial | Sangoma |
| sms | 16.0.22 | Enabled | Commercial | Sangoma |
| smsplus | 16.0.1 | Enabled | Commercial | Sangoma |
| soundlang | 16.0.9 | Enabled | GPLv3+ | Sangoma |
| superfecta | 16.0.19 | Enabled | GPLv2+ | Sangoma |
| sysadmin | 16.0.31.1 | Enabled | Commercial | Sangoma |
| timeconditions | 16.0.10 | Enabled | GPLv3+ | Sangoma |
| tts | 16.0.3 | Enabled | GPLv3+ | Sangoma |
| ttsengines | 16.0.3 | Enabled | AGPLv3 | Sangoma |
| ucp | 16.0.33 | Enabled | AGPLv3+ | Sangoma |
| userman | 16.0.38 | Enabled | AGPLv3+ | Sangoma |
| vmblast | 16.0.4 | Enabled | GPLv3+ | Sangoma |
| vmnotify | 16.0.6 | Enabled | Commercial | Sangoma |
| voicemail | 16.0.48 | Enabled | GPLv3+ | Sangoma |
| voicemail_report | 16.0.3 | Enabled | Commercial | Sangoma |
| voipinnovations | 16.0.26 | Enabled | Commercial | Sangoma |
| vqplus | 16.0.18 | Enabled | Commercial | Sangoma |
| weakpasswords | 16.0.1 | Enabled | GPLv3+ | Sangoma |
| webcallback | 16.0.3 | Enabled | Commercial | Sangoma |
| webrtc | 16.0.17 | Enabled | GPLv3+ | Sangoma |
| xmpp | 16.0.7 | Enabled | AGPLv3 | Sangoma |
| zulu | 16.0.19 | Enabled | Commercial | Sangoma |
±--------------------±-----------±----------------------------------------±------------±----------+
[[email protected] ~]#
I found two disabled
| core | 16.0.68.4 | Disabled; Pending upgrade to 16.0.68.18 | GPLv3+ | Sangoma |
| endpoint | 16.0.77.1 | Disabled; Pending upgrade to 16.0.80.7 | Commercial | Sangoma |
Here is the issue ^^ Pls run below CLI Commands.
fwconsole ma refreshsignatures
fwconsole ma --edge upgradeall
fwconsole chown
fwconsole r --verbose
Good luck
Shahin
Hi @shahin
I just follow this command and it fix the issue it go back to “Apply Config” setup, then I installed the commands that you give me.
Recommended steps (run from the CLI): 1) fwconsole ma install cor
e 2) fwconsole ma enable core
Thanks for the help and answering my query.
Run fwconsole ma install core --force once installed, run the suggested commands from @shahin
1 Like
Yes, that’s what I did.
Thanks